From 64da82ad07168e5391e3d5585de6a52d9e42bcaf Mon Sep 17 00:00:00 2001 From: Kwok-Koon Cheung Date: Mon, 19 Nov 2001 20:31:29 +0000 Subject: [PATCH] Usual update --- po/ChangeLog | 4 ++ po/zh_TW.po | 134 ++++++++++++++++++++++++++++++++--------------------------- 2 files changed, 76 insertions(+), 62 deletions(-) diff --git a/po/ChangeLog b/po/ChangeLog index 9285256..70e358e 100644 --- a/po/ChangeLog +++ b/po/ChangeLog @@ -1,3 +1,7 @@ +2001-11-20 Abel Cheung + + * zh_TW.po: Updated traditional Chinese translation. + 2001-11-15 Takayuki KUSANO * ja.po: Added Japanese translation. diff --git a/po/zh_TW.po b/po/zh_TW.po index 2246af9..f9498b8 100644 --- a/po/zh_TW.po +++ b/po/zh_TW.po @@ -4,9 +4,9 @@ # msgid "" msgstr "" -"Project-Id-Version: glib 1.3.7\n" -"POT-Creation-Date: 2001-10-22 09:35-0400\n" -"PO-Revision-Date: 2001-08-03 07:31+0800\n" +"Project-Id-Version: glib 1.3.11\n" +"POT-Creation-Date: 2001-11-18 08:37-0500\n" +"PO-Revision-Date: 2001-11-20 04:30+0800\n" "Last-Translator: Abel Cheung \n" "Language-Team: Traditional Chinese \n" "MIME-Version: 1.0\n" @@ -14,23 +14,23 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" #: glib/gconvert.c:202 -#, fuzzy, c-format +#, c-format msgid "Conversion from character set '%s' to '%s' is not supported" -msgstr "不支援將字元集 `%s' 轉換到 `%s'" +msgstr "不支援將字元集 '%s' 轉換到 '%s'" #: glib/gconvert.c:206 -#, fuzzy, c-format +#, c-format msgid "Could not open converter from '%s' to '%s': %s" -msgstr "無法開啟由 `%s' 至 `%s' 的轉換器：%s" +msgstr "無法開啟由 '%s' 至 '%s' 的轉換器：%s" #: glib/gconvert.c:356 glib/gconvert.c:639 glib/giochannel.c:1282 -#: glib/giochannel.c:1324 glib/giochannel.c:2164 glib/gutf8.c:875 +#: glib/giochannel.c:1324 glib/giochannel.c:2163 glib/gutf8.c:875 #: glib/gutf8.c:1321 msgid "Invalid byte sequence in conversion input" msgstr "轉換輸入時遇到不正確的位元組次序" #: glib/gconvert.c:361 glib/gconvert.c:572 glib/giochannel.c:1289 -#: glib/giochannel.c:2176 +#: glib/giochannel.c:2175 #, c-format msgid "Error during conversion: %s" msgstr "轉換時發生錯誤：%s" @@ -38,62 +38,61 @@ msgstr "轉換時發生錯誤：%s" #: glib/gconvert.c:379 glib/gutf8.c:871 glib/gutf8.c:1071 glib/gutf8.c:1212 #: glib/gutf8.c:1317 msgid "Partial character sequence at end of input" -msgstr "輸入完結時有未完的字元次序" +msgstr "輸入完結時出現未完成的字元次序" #: glib/gconvert.c:547 #, c-format msgid "Cannot convert fallback '%s' to codeset '%s'" -msgstr "" +msgstr "無法將後備字串 '%s' 轉換到字元集 '%s'" #: glib/gconvert.c:1261 #, c-format msgid "The URI '%s' is not an absolute URI using the file scheme" -msgstr "" +msgstr "URI '%s' 不是使用 file 格式的絕對 URI" #: glib/gconvert.c:1271 #, c-format msgid "The local file URI '%s' may not include a '#'" -msgstr "" +msgstr "本機檔案 URL '%s' 不應含有 '#'" #: glib/gconvert.c:1288 #, c-format msgid "The URI '%s' is invalid" -msgstr "" +msgstr "不正確的 URI '%s'" #: glib/gconvert.c:1297 #, c-format msgid "The hostname of the URI '%s' contains invalidly escaped characters" -msgstr "" +msgstr "URI '%s' 中的主機名稱含有不正確的跳出字元" #: glib/gconvert.c:1313 #, c-format msgid "The URI '%s' contains invalidly escaped characters" -msgstr "" +msgstr "URI '%s' 含有不正確的跳出字元" #: glib/gconvert.c:1356 #, c-format msgid "The pathname '%s' is not an absolute path" -msgstr "" +msgstr "路徑名稱 '%s' 不是絕對路徑" #: glib/gconvert.c:1370 -#, fuzzy msgid "Invalid byte sequence in hostname" -msgstr "轉換輸入時遇到不正確的位元組次序" +msgstr "主機名稱含有不正確的位元組次序" #: glib/gfileutils.c:309 #, c-format msgid "Error reading file '%s': %s" -msgstr "當讀入檔案 '%s' 時發生錯誤：%s" +msgstr "讀入檔案 '%s' 時發生錯誤：%s" #: glib/gfileutils.c:367 #, c-format msgid "Failed to read from file '%s': %s" -msgstr "無法讀入檔案 '%s'：%s" +msgstr "讀入檔案失敗 '%s'：%s" #: glib/gfileutils.c:406 glib/gfileutils.c:474 #, c-format msgid "Failed to open file '%s': %s" -msgstr "無法開啟檔案 '%s'：%s" +msgstr "開啟檔案失敗 '%s'：%s" #: glib/gfileutils.c:420 #, c-format @@ -103,17 +102,17 @@ msgstr "無法取得檔案 '%s' 的屬性：fstat() 失敗：%s" #: glib/gfileutils.c:446 #, c-format msgid "Failed to open file '%s': fdopen() failed: %s" -msgstr "無法開啟檔案 '%s'：fdopen() 失敗：%s" +msgstr "開啟檔案 '%s' 失敗：fdopen() 失敗：%s" #: glib/gfileutils.c:655 #, c-format msgid "Template '%s' invalid, should not contain a '%s'" -msgstr "" +msgstr "樣式 '%s' 不正確，不應含有 '%s'" #: glib/gfileutils.c:667 #, c-format msgid "Template '%s' doesn't end with XXXXXX" -msgstr "" +msgstr "樣式 '%s' 結尾不是 XXXXXX" #: glib/gfileutils.c:688 #, c-format @@ -130,33 +129,33 @@ msgstr "不支援將字元集 `%s' 轉換到 `%s'" msgid "Could not open converter from `%s' to `%s': %s" msgstr "無法開啟由 `%s' 至 `%s' 的轉換器：%s" -#: glib/giochannel.c:1461 +#: glib/giochannel.c:1460 msgid "Can't do a raw read in g_io_channel_read_line_string" -msgstr "" +msgstr "g_io_channel_read_line_string 中無法讀入原始資料" -#: glib/giochannel.c:1508 glib/giochannel.c:1762 glib/giochannel.c:1848 +#: glib/giochannel.c:1507 glib/giochannel.c:1761 glib/giochannel.c:1847 msgid "Leftover unconverted data in read buffer" -msgstr "" +msgstr "用來讀入資料的緩衝區中仍有未轉換的資料" -#: glib/giochannel.c:1588 glib/giochannel.c:1662 +#: glib/giochannel.c:1587 glib/giochannel.c:1661 msgid "Channel terminates in a partial character" -msgstr "" +msgstr "輸入管道在字元未完成前就終止" -#: glib/giochannel.c:1648 +#: glib/giochannel.c:1647 msgid "Can't do a raw read in g_io_channel_read_to_end" -msgstr "" +msgstr "g_io_channel_read_to_end 中無法讀入原始資料" #: glib/giowin32.c:701 glib/giowin32.c:730 msgid "Incorrect message size" -msgstr "" +msgstr "訊息長度不正確" #: glib/giowin32.c:1024 glib/giowin32.c:1077 msgid "Socket error" -msgstr "" +msgstr "Socket 發生錯誤" #: glib/giowin32.c:1277 msgid "Channel set flags unsupported" -msgstr "" +msgstr "不支援設定管道旗標的操作" #: glib/gmarkup.c:216 #, c-format @@ -171,7 +170,7 @@ msgstr "在第 %d 行發生錯誤：%s" #: glib/gmarkup.c:379 msgid "" "Empty entity '&;' seen; valid entities are: & " < > '" -msgstr "" +msgstr "出現空白的實體 '&;'；可用的實體為：& " < > '" #: glib/gmarkup.c:389 #, c-format @@ -180,38 +179,42 @@ msgid "" "begins an entity; if this ampersand isn't supposed to be an entity, escape " "it as &" msgstr "" +"實體名稱不應以 '%s' 開始，應該使用 & 字元；如果這個 & 字元不是作為實體使用，" +"請將 & 轉換為 &" #: glib/gmarkup.c:425 #, c-format msgid "Character '%s' is not valid inside an entity name" -msgstr "" +msgstr "實體名稱中不應含有字元 '%s'" #: glib/gmarkup.c:469 #, c-format msgid "Entity name '%s' is not known" -msgstr "" +msgstr "不詳的實體名稱 '%s'" #: glib/gmarkup.c:479 msgid "" "Entity did not end with a semicolon; most likely you used an ampersand " "character without intending to start an entity - escape ampersand as &" msgstr "" +"實體的結尾不是分號；很可能你想使用 & 字元但未將它變為實體 ─ 請將 & 轉換" +"為 &" #: glib/gmarkup.c:525 #, c-format msgid "" "Failed to parse '%s', which should have been a digit inside a character " "reference (ê for example) - perhaps the digit is too large" -msgstr "" +msgstr "解析 '%s' 失敗，字元參引內應該含有數字（例如 ê）─ 可能是數字過大" #: glib/gmarkup.c:550 #, c-format msgid "Character reference '%s' does not encode a permitted character" -msgstr "" +msgstr "字元參引 '%s' 含有不正當的字元" #: glib/gmarkup.c:567 msgid "Empty character reference; should include a digit such as dž" -msgstr "" +msgstr "空白的字元參引；應該包括數字，像 dž" #: glib/gmarkup.c:577 msgid "" @@ -219,6 +222,8 @@ msgid "" "ampersand character without intending to start an entity - escape ampersand " "as &" msgstr "" +"字元參引的結尾不是分號；很可能你想使用 & 字元但未將它變為實體 ─ 請將 & 轉換" +"為 &" #: glib/gmarkup.c:827 glib/gmarkup.c:855 glib/gmarkup.c:886 msgid "Invalid UTF-8 encoded text" @@ -233,20 +238,20 @@ msgstr "文件開始必須為一元素（例如 ）" msgid "" "'%s' is not a valid character following a '<' character; it may not begin an " "element name" -msgstr "" +msgstr "'<' 字元後的 '%s' 不是正確的字元；這樣不可能是元素名稱的開始部份" #: glib/gmarkup.c:1023 #, c-format msgid "" "Odd character '%s', expected a '>' character to end the start tag of element " "'%s'" -msgstr "不尋常的字元 '%s'，應為令元素 '%s' 的開始標籤終結的 '>' 字元" +msgstr "不尋常的字元 '%s'，元素 '%s' 的開始標籤應該以 '>' 字元終結" #: glib/gmarkup.c:1110 #, c-format msgid "" "Odd character '%s', expected a '=' after attribute name '%s' of element '%s'" -msgstr "" +msgstr "不尋常的字元 '%1$s'，元素 '%3$s' 的屬性名稱 '%2$s' 後應該是 '=' 字元" #: glib/gmarkup.c:1151 #, c-format @@ -255,6 +260,8 @@ msgid "" "element '%s', or optionally an attribute; perhaps you used an invalid " "character in an attribute name" msgstr "" +"不尋常的字元 '%s'，元素 '%s' 的開始標籤應該以 '>' 或 '/' 字元終結，也可以是屬" +"性；或許你在屬性名稱中使用了不正確的字元" #: glib/gmarkup.c:1224 #, c-format @@ -262,23 +269,25 @@ msgid "" "Odd character '%s', expected an open quote mark after the equals sign when " "giving value for attribute '%s' of element '%s'" msgstr "" +"不尋常的字元 '%1$s'，當指定元素 '%3$s' 的屬性 '%2$s' 的值時，等號後應該出現開" +"引號" #: glib/gmarkup.c:1351 #, c-format msgid "" "'%s' is not a valid character following the characters ''" msgstr "" +"名稱為 '%2$s' 的關閉元素後面，尾隨的 '%1$s' 字元是不正確的；允許的字元為 '>'" #: glib/gmarkup.c:1541 msgid "Document was empty or contained only whitespace" @@ -293,29 +303,29 @@ msgstr "文件完全空白或只含有空白字元" #: glib/gmarkup.c:1555 msgid "Document ended unexpectedly just after an open angle bracket '<'" -msgstr "" +msgstr "文件在尖角括號 '<' 後突然終止" #: glib/gmarkup.c:1563 glib/gmarkup.c:1606 #, c-format msgid "" "Document ended unexpectedly with elements still open - '%s' was the last " "element opened" -msgstr "" +msgstr "文件在仍然有開啟中的元素時突然終止 - '%s' 是最後一個開啟的元素" #: glib/gmarkup.c:1571 #, c-format msgid "" "Document ended unexpectedly, expected to see a close angle bracket ending " "the tag <%s/>" -msgstr "" +msgstr "文件突然終止，預期應該出現用來關閉標籤 <%s/> 的尖角括號" #: glib/gmarkup.c:1577 msgid "Document ended unexpectedly inside an element name" -msgstr "文件在元素的名稱未完結時突然終止" +msgstr "文件在元素的名稱內突然終止" #: glib/gmarkup.c:1582 msgid "Document ended unexpectedly inside an attribute name" -msgstr "文件在屬性名稱未完結時突然終止" +msgstr "文件在屬性名稱內突然終止" #: glib/gmarkup.c:1587 msgid "Document ended unexpectedly inside an element-opening tag." @@ -325,11 +335,11 @@ msgstr "文件在元素的開啟標籤內突然終止" msgid "" "Document ended unexpectedly after the equals sign following an attribute " "name; no attribute value" -msgstr "" +msgstr "文件在屬性名稱的等號後突然終止；沒有屬性值" #: glib/gmarkup.c:1599 msgid "Document ended unexpectedly while inside an attribute value" -msgstr "文件在屬性值未完結時突然終止" +msgstr "文件在屬性值內突然終止" #: glib/gmarkup.c:1614 #, c-format @@ -338,25 +348,25 @@ msgstr "文件在元素 '%s' 的關閉標籤內突然終止" #: glib/gmarkup.c:1620 msgid "Document ended unexpectedly inside a comment or processing instruction" -msgstr "文件在註釋或處理指示未完結時突然終止" +msgstr "文件在註解或處理指示內突然終止" #: glib/gshell.c:69 msgid "Quoted text doesn't begin with a quotation mark" -msgstr "" +msgstr "應該用引號括起來的文字不是以括號為開始" #: glib/gshell.c:159 msgid "Unmatched quotation mark in command line or other shell-quoted text" -msgstr "" +msgstr "指令列或其它標為指令的字串內有不對稱的引號" #: glib/gshell.c:526 #, c-format msgid "Text ended just after a '' character. (The text was '%s')" -msgstr "" +msgstr "文字在 '' 字元後就終止了。（文字為 '%s'）" #: glib/gshell.c:533 #, c-format msgid "Text ended before matching quote was found for %c. (The text was '%s')" -msgstr "" +msgstr "字串完結前仍沒有對應於 %c 的引號（字串為 '%s'）" #: glib/gshell.c:545 msgid "Text was empty (or contained only whitespace)" @@ -370,7 +380,7 @@ msgstr "無法由副程序讀入資料" msgid "" "Unexpected error in g_io_channel_win32_poll() reading data from a child " "process" -msgstr "當 g_io_channel_win32_poll() 由副程序讀入資料時發生未預期的錯誤" +msgstr "當 g_io_channel_win32_poll() 由副程序讀入資料時發生非預期的錯誤" #: glib/gspawn-win32.c:837 glib/gspawn.c:907 #, c-format @@ -429,7 +439,7 @@ msgstr "執行副程序時發生不明的錯誤" #: glib/gspawn.c:1169 #, c-format msgid "Failed to read enough data from child pid pipe (%s)" -msgstr "" +msgstr "無法由副程序 pid 管道讀入足夠資料（%s）" #: glib/gutf8.c:950 msgid "Character out of range for UTF-8" -- 2.7.4