From 64089178219371a512ddca8016d78bfdbe84565d Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Tue, 28 Nov 2017 22:33:27 -0800 Subject: [PATCH] sunxi: video: HDMI: split VSYNC and HSYNC polarity settings These are actually different bits, and since some monitors (Benq BL2420PT) have modes with different HSYNC and VSYNC polarity, we should set them independently Tested on Pine64-LTS with Benq BL2420PT monitor. Signed-off-by: Vasily Khoruzhick Reviewed-by: Anatolij Gustschin Acked-by: Maxime Ripard Reviewed-by: Jagan Teki --- drivers/video/sunxi/sunxi_dw_hdmi.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c b/drivers/video/sunxi/sunxi_dw_hdmi.c index 33920a2..4f01d1b 100644 --- a/drivers/video/sunxi/sunxi_dw_hdmi.c +++ b/drivers/video/sunxi/sunxi_dw_hdmi.c @@ -304,15 +304,11 @@ static int sunxi_dw_hdmi_enable(struct udevice *dev, int panel_bpp, sunxi_dw_hdmi_lcdc_init(priv->mux, edid, panel_bpp); - /* - * Condition in original code is a bit weird. This is attempt - * to make it more reasonable and it works. It could be that - * bits and conditions are related and should be separated. - */ - if (!((edid->flags & DISPLAY_FLAGS_HSYNC_HIGH) && - (edid->flags & DISPLAY_FLAGS_VSYNC_HIGH))) { - setbits_le32(&phy->pol, 0x300); - } + if (edid->flags & DISPLAY_FLAGS_HSYNC_LOW) + setbits_le32(&phy->pol, 0x200); + + if (edid->flags & DISPLAY_FLAGS_VSYNC_LOW) + setbits_le32(&phy->pol, 0x100); setbits_le32(&phy->ctrl, 0xf << 12); -- 2.7.4