From 63ee51575f6c4a070ffed059b9caa6e4645f3872 Mon Sep 17 00:00:00 2001 From: Hariprasad Kelam Date: Sun, 15 Nov 2020 01:22:56 +0530 Subject: [PATCH] octeontx2-pf: Add support for unicast MAC address filtering Add unicast MAC address filtering support using install flow message. Total of 8 MCAM entries are allocated for adding unicast mac filtering rules. If the MCAM allocation fails, the unicast filtering support will not be advertised. Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Goutham Signed-off-by: Naveen Mamindlapalli Signed-off-by: Jakub Kicinski --- .../ethernet/marvell/octeontx2/nic/otx2_common.h | 15 ++- .../ethernet/marvell/octeontx2/nic/otx2_flows.c | 120 ++++++++++++++++++++- .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 15 ++- 3 files changed, 143 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h index 2387c40..f959688 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h @@ -229,12 +229,21 @@ struct otx2_ptp { #define OTX2_HW_TIMESTAMP_LEN 8 +struct otx2_mac_table { + u8 addr[ETH_ALEN]; + u16 mcam_entry; + bool inuse; +}; + struct otx2_flow_config { u16 entry[NPC_MAX_NONCONTIG_ENTRIES]; u32 nr_flows; #define OTX2_MAX_NTUPLE_FLOWS 32 -#define OTX2_MCAM_COUNT OTX2_MAX_NTUPLE_FLOWS +#define OTX2_MAX_UNICAST_FLOWS 8 +#define OTX2_MCAM_COUNT (OTX2_MAX_NTUPLE_FLOWS + \ + OTX2_MAX_UNICAST_FLOWS) u32 ntuple_offset; + u32 unicast_offset; u32 ntuple_max_flows; struct list_head flow_list; }; @@ -251,6 +260,7 @@ struct otx2_nic { #define OTX2_FLAG_INTF_DOWN BIT_ULL(2) #define OTX2_FLAG_MCAM_ENTRIES_ALLOC BIT_ULL(3) #define OTX2_FLAG_NTUPLE_SUPPORT BIT_ULL(4) +#define OTX2_FLAG_UCAST_FLTR_SUPPORT BIT_ULL(5) #define OTX2_FLAG_RX_PAUSE_ENABLED BIT_ULL(9) #define OTX2_FLAG_TX_PAUSE_ENABLED BIT_ULL(10) u64 flags; @@ -279,6 +289,7 @@ struct otx2_nic { struct refill_work *refill_wrk; struct workqueue_struct *otx2_wq; struct work_struct rx_mode_work; + struct otx2_mac_table *mac_table; /* Ethtool stuff */ u32 msg_enable; @@ -674,5 +685,7 @@ int otx2_add_flow(struct otx2_nic *pfvf, int otx2_remove_flow(struct otx2_nic *pfvf, u32 location); int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp, struct npc_install_flow_req *req); +int otx2_del_macfilter(struct net_device *netdev, const u8 *mac); +int otx2_add_macfilter(struct net_device *netdev, const u8 *mac); #endif /* OTX2_COMMON_H */ diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c index e02293e..f297edb 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c @@ -46,14 +46,21 @@ int otx2_alloc_mcam_entries(struct otx2_nic *pfvf) rsp = (struct npc_mcam_alloc_entry_rsp *)otx2_mbox_get_rsp (&pfvf->mbox.mbox, 0, &req->hdr); - if (rsp->count != req->count) + if (rsp->count != req->count) { netdev_info(pfvf->netdev, "Unable to allocate %d MCAM entries, got %d\n", req->count, rsp->count); - - flow_cfg->ntuple_max_flows = rsp->count; - flow_cfg->ntuple_offset = 0; - pfvf->flags |= OTX2_FLAG_NTUPLE_SUPPORT; + /* support only ntuples here */ + flow_cfg->ntuple_max_flows = rsp->count; + flow_cfg->ntuple_offset = 0; + pfvf->flags |= OTX2_FLAG_NTUPLE_SUPPORT; + } else { + flow_cfg->ntuple_offset = 0; + flow_cfg->unicast_offset = flow_cfg->ntuple_offset + + OTX2_MAX_NTUPLE_FLOWS; + pfvf->flags |= OTX2_FLAG_NTUPLE_SUPPORT; + pfvf->flags |= OTX2_FLAG_UCAST_FLTR_SUPPORT; + } for (i = 0; i < rsp->count; i++) flow_cfg->entry[i] = rsp->entry_list[i]; @@ -82,6 +89,11 @@ int otx2_mcam_flow_init(struct otx2_nic *pf) if (err) return err; + pf->mac_table = devm_kzalloc(pf->dev, sizeof(struct otx2_mac_table) + * OTX2_MAX_UNICAST_FLOWS, GFP_KERNEL); + if (!pf->mac_table) + return -ENOMEM; + return 0; } @@ -90,6 +102,104 @@ void otx2_mcam_flow_del(struct otx2_nic *pf) otx2_destroy_mcam_flows(pf); } +/* On success adds mcam entry + * On failure enable promisous mode + */ +static int otx2_do_add_macfilter(struct otx2_nic *pf, const u8 *mac) +{ + struct otx2_flow_config *flow_cfg = pf->flow_cfg; + struct npc_install_flow_req *req; + int err, i; + + if (!(pf->flags & OTX2_FLAG_UCAST_FLTR_SUPPORT)) + return -ENOMEM; + + /* dont have free mcam entries or uc list is greater than alloted */ + if (netdev_uc_count(pf->netdev) > OTX2_MAX_UNICAST_FLOWS) + return -ENOMEM; + + mutex_lock(&pf->mbox.lock); + req = otx2_mbox_alloc_msg_npc_install_flow(&pf->mbox); + if (!req) { + mutex_unlock(&pf->mbox.lock); + return -ENOMEM; + } + + /* unicast offset starts with 32 0..31 for ntuple */ + for (i = 0; i < OTX2_MAX_UNICAST_FLOWS; i++) { + if (pf->mac_table[i].inuse) + continue; + ether_addr_copy(pf->mac_table[i].addr, mac); + pf->mac_table[i].inuse = true; + pf->mac_table[i].mcam_entry = + flow_cfg->entry[i + flow_cfg->unicast_offset]; + req->entry = pf->mac_table[i].mcam_entry; + break; + } + + ether_addr_copy(req->packet.dmac, mac); + eth_broadcast_addr((u8 *)&req->mask.dmac); + req->features = BIT_ULL(NPC_DMAC); + req->channel = pf->hw.rx_chan_base; + req->intf = NIX_INTF_RX; + req->op = NIX_RX_ACTION_DEFAULT; + req->set_cntr = 1; + + err = otx2_sync_mbox_msg(&pf->mbox); + mutex_unlock(&pf->mbox.lock); + + return err; +} + +int otx2_add_macfilter(struct net_device *netdev, const u8 *mac) +{ + struct otx2_nic *pf = netdev_priv(netdev); + + return otx2_do_add_macfilter(pf, mac); +} + +static bool otx2_get_mcamentry_for_mac(struct otx2_nic *pf, const u8 *mac, + int *mcam_entry) +{ + int i; + + for (i = 0; i < OTX2_MAX_UNICAST_FLOWS; i++) { + if (!pf->mac_table[i].inuse) + continue; + + if (ether_addr_equal(pf->mac_table[i].addr, mac)) { + *mcam_entry = pf->mac_table[i].mcam_entry; + pf->mac_table[i].inuse = false; + return true; + } + } + return false; +} + +int otx2_del_macfilter(struct net_device *netdev, const u8 *mac) +{ + struct otx2_nic *pf = netdev_priv(netdev); + struct npc_delete_flow_req *req; + int err, mcam_entry; + + /* check does mcam entry exists for given mac */ + if (!otx2_get_mcamentry_for_mac(pf, mac, &mcam_entry)) + return 0; + + mutex_lock(&pf->mbox.lock); + req = otx2_mbox_alloc_msg_npc_delete_flow(&pf->mbox); + if (!req) { + mutex_unlock(&pf->mbox.lock); + return -ENOMEM; + } + req->entry = mcam_entry; + /* Send message to AF */ + err = otx2_sync_mbox_msg(&pf->mbox); + mutex_unlock(&pf->mbox.lock); + + return err; +} + static struct otx2_flow *otx2_find_flow(struct otx2_nic *pfvf, u32 location) { struct otx2_flow *iter; diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 9cf3e19..ac90302 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1720,10 +1720,20 @@ static void otx2_do_set_rx_mode(struct work_struct *work) struct otx2_nic *pf = container_of(work, struct otx2_nic, rx_mode_work); struct net_device *netdev = pf->netdev; struct nix_rx_mode *req; + bool promisc = false; if (!(netdev->flags & IFF_UP)) return; + if ((netdev->flags & IFF_PROMISC) || + (netdev_uc_count(netdev) > OTX2_MAX_UNICAST_FLOWS)) { + promisc = true; + } + + /* Write unicast address to mcam entries or del from mcam */ + if (!promisc && netdev->priv_flags & IFF_UNICAST_FLT) + __dev_uc_sync(netdev, otx2_add_macfilter, otx2_del_macfilter); + mutex_lock(&pf->mbox.lock); req = otx2_mbox_alloc_msg_nix_set_rx_mode(&pf->mbox); if (!req) { @@ -1733,7 +1743,7 @@ static void otx2_do_set_rx_mode(struct work_struct *work) req->mode = NIX_RX_MODE_UCAST; - if (netdev->flags & IFF_PROMISC) + if (promisc) req->mode |= NIX_RX_MODE_PROMISC; else if (netdev->flags & (IFF_ALLMULTI | IFF_MULTICAST)) req->mode |= NIX_RX_MODE_ALLMULTI; @@ -2125,6 +2135,9 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (pf->flags & OTX2_FLAG_NTUPLE_SUPPORT) netdev->hw_features |= NETIF_F_NTUPLE; + if (pf->flags & OTX2_FLAG_UCAST_FLTR_SUPPORT) + netdev->priv_flags |= IFF_UNICAST_FLT; + netdev->gso_max_segs = OTX2_MAX_GSO_SEGS; netdev->watchdog_timeo = OTX2_TX_TIMEOUT; -- 2.7.4