From 63595cc5b346df4dde8467729ccb126fa7bc7865 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 29 Sep 2023 10:11:23 -0300 Subject: [PATCH] arm64: dts: imx8mp-debix-model-a: Remove USB hub reset-gpios [ Upstream commit 0ce9a2c121e3ab354cf66aeecd3ed0758f3c5067 ] The SAI2_TXC pin is left unconnected per the imx8mp-debix-model-a schematics: https://debix.io/Uploads/Temp/file/20230331/DEBIX%20Model%20A%20Schematics.pdf Also, the RTS5411E USB hub chip does not have a reset pin. Remove this pin description to properly describe the hardware. This also fixes the following schema warning: hub@1: 'reset-gpios' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml# Fixes: 0253e1cb6300 ("arm64: dts: imx8mp-debix: add USB host support") Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index 28db9349ed62..267ceffc02d8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -284,7 +284,6 @@ usb_hub_2_x: hub@1 { compatible = "usbbda,5411"; reg = <1>; - reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; vdd-supply = <®_usb_hub>; peer-hub = <&usb_hub_3_x>; }; @@ -293,7 +292,6 @@ usb_hub_3_x: hub@2 { compatible = "usbbda,411"; reg = <2>; - reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; vdd-supply = <®_usb_hub>; peer-hub = <&usb_hub_2_x>; }; @@ -443,7 +441,6 @@ pinctrl_usb1: usb1grp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10 - MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19 >; }; -- 2.34.1