From 62eaf7e149a54f62cb6016d9f3915d5b1c95197a Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 11 Jan 2018 15:51:58 +0200 Subject: [PATCH] sdhci: Advertise 2.0v supply on SDIO host controller [ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ] On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO, requires 2.0v, while the host, according to Intel Merrifield TRM, supports 1.8v supply only. The card announces itself as mmc2: new ultra high speed DDR50 SDIO card at address 0001 Introduce a custom OCR mask for SDIO host controller on Intel Merrifield and add a special case to sdhci_set_power_noreg() to override 2.0v supply by enforcing 1.8v power choice. Signed-off-by: Andy Shevchenko Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci-pci-core.c | 2 ++ drivers/mmc/host/sdhci.c | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 070f5da..5bedf4b 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -806,6 +806,8 @@ static int intel_mrfld_mmc_probe_slot(struct sdhci_pci_slot *slot) slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; break; case INTEL_MRFLD_SDIO: + /* Advertise 2.0v for compatibility with the SDIO card's OCR */ + slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195; slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD; break; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 90cc1977..d35deb7 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1470,6 +1470,13 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode, if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: + /* + * Without a regulator, SDHCI does not support 2.0v + * so we only get here if the driver deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v + * for the purpose of turning on the power. + */ + case MMC_VDD_20_21: pwr = SDHCI_POWER_180; break; case MMC_VDD_29_30: -- 2.7.4