From 6252faa0da0954b548f05d23c65734cd8c905382 Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Thu, 27 Sep 2018 10:32:05 +0530 Subject: [PATCH] armv8: lsch3: Add support of serdes3 module Some lsch3 based SoCs like lx2160a contains three serdes modules. Add support for third serdes protocol in lsch3 Signed-off-by: Priyanka Jain Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 + .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 71 ++++++++++++++++++++++ .../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 + 3 files changed, 76 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 1872c66..2d1946c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -348,6 +348,9 @@ config SYS_FSL_SRDS_1 config SYS_FSL_SRDS_2 bool +config SYS_NXP_SRDS_3 + bool + config SYS_HAS_SERDES bool diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index 2bef841..bb50e3d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* + * Copyright 2016-2018 NXP * Copyright 2014-2015 Freescale Semiconductor, Inc. */ @@ -16,6 +17,9 @@ static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT]; #ifdef CONFIG_SYS_FSL_SRDS_2 static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT]; #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 +static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT]; +#endif #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) int xfi_dpmac[XFI8 + 1]; @@ -57,6 +61,12 @@ int is_serdes_configured(enum srds_prtcl device) ret |= serdes2_prtcl_map[device]; #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + if (!serdes3_prtcl_map[NONE]) + fsl_serdes_init(); + + ret |= serdes3_prtcl_map[device]; +#endif return !!ret; } @@ -82,6 +92,13 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device) cfg >>= FSL_CHASSIS3_SRDS2_PRTCL_SHIFT; break; #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + case NXP_SRDS_3: + cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS3_REGSR - 1]); + cfg &= FSL_CHASSIS3_SRDS3_PRTCL_MASK; + cfg >>= FSL_CHASSIS3_SRDS3_PRTCL_SHIFT; + break; +#endif default: printf("invalid SerDes%d\n", sd); break; @@ -201,6 +218,12 @@ struct serdes_prctl_info srds_prctl_info[] = { .shift = FSL_CHASSIS3_SRDS2_PRTCL_SHIFT }, #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + {.id = 3, + .mask = FSL_CHASSIS3_SRDS3_PRTCL_MASK, + .shift = FSL_CHASSIS3_SRDS3_PRTCL_SHIFT + }, +#endif {} /* NULL ENTRY */ }; @@ -341,6 +364,11 @@ int setup_serdes_volt(u32 svdd) (void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x10000); u32 cfg_rcwsrds2 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]); #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + struct ccsr_serdes __iomem *serdes3_base = + (void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x20000); + u32 cfg_rcwsrds3 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS3_REGSR - 1]); +#endif u32 cfg_tmp; int svdd_cur, svdd_tar; int ret = 1; @@ -370,6 +398,9 @@ int setup_serdes_volt(u32 svdd) #ifdef CONFIG_SYS_FSL_SRDS_2 do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, false); #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + do_enabled_lanes_reset(3, cfg_rcwsrds3, serdes3_base, false); +#endif /* Put the all enabled PLL in reset */ #ifdef CONFIG_SYS_FSL_SRDS_1 @@ -383,6 +414,12 @@ int setup_serdes_volt(u32 svdd) do_pll_reset(cfg_tmp, serdes2_base); #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + cfg_tmp = cfg_rcwsrds3 & 0x30; + cfg_tmp >>= 4; + do_pll_reset(cfg_tmp, serdes3_base); +#endif + /* Put the Rx/Tx calibration into reset */ #ifdef CONFIG_SYS_FSL_SRDS_1 do_rx_tx_cal_reset(serdes1_base); @@ -392,6 +429,10 @@ int setup_serdes_volt(u32 svdd) do_rx_tx_cal_reset(serdes2_base); #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + do_rx_tx_cal_reset(serdes3_base); +#endif + ret = set_serdes_volt(svdd); if (ret < 0) { printf("could not change SVDD\n"); @@ -408,6 +449,11 @@ int setup_serdes_volt(u32 svdd) cfg_tmp >>= 2; do_serdes_enable(cfg_tmp, serdes2_base); #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + cfg_tmp = cfg_rcwsrds3 & 0x30; + cfg_tmp >>= 4; + do_serdes_enable(cfg_tmp, serdes3_base); +#endif /* Wait for at at least 625us, ensure the PLLs being reset are locked */ udelay(800); @@ -422,6 +468,13 @@ int setup_serdes_volt(u32 svdd) cfg_tmp >>= 2; do_pll_lock(cfg_tmp, serdes2_base); #endif + +#ifdef CONFIG_SYS_NXP_SRDS_3 + cfg_tmp = cfg_rcwsrds3 & 0x30; + cfg_tmp >>= 4; + do_pll_lock(cfg_tmp, serdes3_base); +#endif + /* Take the all enabled lanes out of reset */ #ifdef CONFIG_SYS_FSL_SRDS_1 do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, true); @@ -430,6 +483,10 @@ int setup_serdes_volt(u32 svdd) do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, true); #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + do_enabled_lanes_reset(3, cfg_rcwsrds3, serdes3_base, true); +#endif + /* For each PLL being reset, and achieved PLL lock set RST_DONE */ #ifdef CONFIG_SYS_FSL_SRDS_1 cfg_tmp = cfg_rcwsrds1 & 0x3; @@ -441,6 +498,12 @@ int setup_serdes_volt(u32 svdd) do_pll_reset_done(cfg_tmp, serdes2_base); #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + cfg_tmp = cfg_rcwsrds3 & 0x30; + cfg_tmp >>= 4; + do_pll_reset_done(cfg_tmp, serdes3_base); +#endif + return ret; } @@ -472,4 +535,12 @@ void fsl_serdes_init(void) FSL_CHASSIS3_SRDS2_PRTCL_SHIFT, serdes2_prtcl_map); #endif +#ifdef CONFIG_SYS_NXP_SRDS_3 + serdes_init(NXP_SRDS_3, + CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + NXP_SRDS_3 * 0x10000, + FSL_CHASSIS3_SRDS3_REGSR, + FSL_CHASSIS3_SRDS3_PRTCL_MASK, + FSL_CHASSIS3_SRDS3_PRTCL_SHIFT, + serdes3_prtcl_map); +#endif } diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h index 6981076..c041a31 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h @@ -1,5 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* + * Copyright 2018 NXP * Copyright 2015 Freescale Semiconductor, Inc. */ @@ -57,6 +58,7 @@ enum srds_prtcl { enum srds { FSL_SRDS_1 = 0, FSL_SRDS_2 = 1, + NXP_SRDS_3 = 2, }; #elif defined(CONFIG_FSL_LSCH2) enum srds_prtcl { -- 2.7.4