From 60e93575476f90a72146b51283f514da655410a7 Mon Sep 17 00:00:00 2001 From: Chander Kashyap Date: Tue, 28 May 2013 18:32:07 +0530 Subject: [PATCH] serial: samsung: enable clock before clearing pending interrupts during init Ensure that the uart controller clock is enabled prior to writing to the interrupt mask and pending registers in the s3c24xx_serial_init_port function. Signed-off-by: Chander Kashyap Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 8942941..0c8a9fa 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1166,6 +1166,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ourport->tx_irq = ret; ourport->clk = clk_get(&platdev->dev, "uart"); + if (IS_ERR(ourport->clk)) { + pr_err("%s: Controller clock not found\n", + dev_name(&platdev->dev)); + return PTR_ERR(ourport->clk); + } + + ret = clk_prepare_enable(ourport->clk); + if (ret) { + pr_err("uart: clock failed to prepare+enable: %d\n", ret); + clk_put(ourport->clk); + return ret; + } /* Keep all interrupts masked and cleared */ if (s3c24xx_serial_has_interrupt_mask(port)) { @@ -1180,6 +1192,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, /* reset the fifos (and setup the uart) */ s3c24xx_serial_resetport(port, cfg); + clk_disable_unprepare(ourport->clk); return 0; } -- 2.7.4