From 60571ac9ea621d3d1404f78bc0f27b709e82f2fd Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Sun, 14 May 2023 19:03:20 +0200 Subject: [PATCH] ALSA: emu10k1: automate encoding of sub-register definitions The idea to encode the bitfield manipulation in the register address is quite clever, but doing that by hand is ugly and error-prone. So derive it automatically from the mask instead. Macros cannot #define other macros, so we now declare enums instead. This also adds macros for decoding the register definitions. These will be used by later commits. Signed-off-by: Oswald Buddenhagen Link: https://lore.kernel.org/r/20230514170323.3408798-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai --- include/sound/emu10k1.h | 123 +++++++++++++++++++++++------------------------- 1 file changed, 60 insertions(+), 63 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 7129b92..e9b1729 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -38,6 +38,32 @@ #define IP_TO_CP(ip) ((ip == 0) ? 0 : (((0x00001000uL | (ip & 0x00000FFFL)) << (((ip >> 12) & 0x000FL) + 4)) & 0xFFFF0000uL)) +// This is used to define hardware bit-fields (sub-registers) by combining +// the bit shift and count with the actual register address. The passed +// mask must represent a single run of adjacent bits. +// The non-concatenating (_NC) variant should be used directly only for +// sub-registers that do not follow the _ naming pattern. +#define SUB_REG_NC(reg, field, mask) \ + enum { \ + field ## _MASK = mask, \ + field = reg | \ + (__builtin_ctz(mask) << 16) | \ + (__builtin_popcount(mask) << 24), \ + }; +#define SUB_REG(reg, field, mask) SUB_REG_NC(reg, reg ## _ ## field, mask) + +// Macros for manipulating values of bit-fields declared using the above macros. +// Best used with constant register addresses, as otherwise quite some code is +// generated. The actual register read/write functions handle combined addresses +// automatically, so use of these macros conveys no advantage when accessing a +// single sub-register at a time. +#define REG_SHIFT(r) (((r) >> 16) & 0x1f) +#define REG_SIZE(r) (((r) >> 24) & 0x1f) +#define REG_MASK0(r) ((1U << REG_SIZE(r)) - 1U) +#define REG_MASK(r) (REG_MASK0(r) << REG_SHIFT(r)) +#define REG_VAL_GET(r, v) ((v & REG_MASK(r)) >> REG_SHIFT(r)) +#define REG_VAL_PUT(r, v) ((v) << REG_SHIFT(r)) + // Audigy specify registers are prefixed with 'A_' /************************************************************************************************/ @@ -148,12 +174,10 @@ #define INTE_MIDIRXENABLE 0x00000001 /* Enable MIDI receive-buffer-empty interrupts */ #define WC 0x10 /* Wall Clock register */ -#define WC_SAMPLECOUNTER_MASK 0x03FFFFC0 /* Sample periods elapsed since reset */ -#define WC_SAMPLECOUNTER 0x14060010 -#define WC_CURRENTCHANNEL_MASK 0x0000003F /* Channel [0..63] currently being serviced */ +SUB_REG(WC, SAMPLECOUNTER, 0x03FFFFC0) /* Sample periods elapsed since reset */ +SUB_REG(WC, CURRENTCHANNEL, 0x0000003F) /* Channel [0..63] currently being serviced */ /* NOTE: Each channel takes 1/64th of a sample */ /* period to be serviced. */ -#define WC_CURRENTCHANNEL 0x06000010 #define HCFG 0x14 /* Hardware config register */ /* NOTE: There is no reason to use the legacy */ @@ -225,9 +249,8 @@ /* async audio source */ #define HCFG_LOCKSOUNDCACHE 0x00000008 /* 1 = Cancel bustmaster accesses to soundcache */ /* NOTE: This should generally never be used. */ -#define HCFG_LOCKTANKCACHE_MASK 0x00000004 /* 1 = Cancel bustmaster accesses to tankcache */ +SUB_REG(HCFG, LOCKTANKCACHE, 0x00000004) /* 1 = Cancel bustmaster accesses to tankcache */ /* NOTE: This should generally never be used. */ -#define HCFG_LOCKTANKCACHE 0x01020014 #define HCFG_MUTEBUTTONENABLE 0x00000002 /* 1 = Master mute button sets AUDIOENABLE = 0. */ /* NOTE: This is a 'cheap' way to implement a */ /* master mute function on the mute button, and */ @@ -382,55 +405,38 @@ // which the current registers "swerve" gradually. #define CPF 0x00 /* Current pitch and fraction register */ -#define CPF_CURRENTPITCH_MASK 0xffff0000 /* Current pitch (linear, 0x4000 == unity pitch shift) */ -#define CPF_CURRENTPITCH 0x10100000 +SUB_REG(CPF, CURRENTPITCH, 0xffff0000) /* Current pitch (linear, 0x4000 == unity pitch shift) */ #define CPF_STEREO_MASK 0x00008000 /* 1 = Even channel interleave, odd channel locked */ #define CPF_STOP_MASK 0x00004000 /* 1 = Current pitch forced to 0 */ #define CPF_FRACADDRESS_MASK 0x00003fff /* Linear fractional address of the current channel */ #define PTRX 0x01 /* Pitch target and send A/B amounts register */ -#define PTRX_PITCHTARGET_MASK 0xffff0000 /* Pitch target of specified channel */ -#define PTRX_PITCHTARGET 0x10100001 -#define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00 /* Linear level of channel output sent to FX send bus A */ -#define PTRX_FXSENDAMOUNT_A 0x08080001 -#define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff /* Linear level of channel output sent to FX send bus B */ -#define PTRX_FXSENDAMOUNT_B 0x08000001 +SUB_REG(PTRX, PITCHTARGET, 0xffff0000) /* Pitch target of specified channel */ +SUB_REG(PTRX, FXSENDAMOUNT_A, 0x0000ff00) /* Linear level of channel output sent to FX send bus A */ +SUB_REG(PTRX, FXSENDAMOUNT_B, 0x000000ff) /* Linear level of channel output sent to FX send bus B */ #define CVCF 0x02 /* Current volume and filter cutoff register */ -#define CVCF_CURRENTVOL_MASK 0xffff0000 /* Current linear volume of specified channel */ -#define CVCF_CURRENTVOL 0x10100002 -#define CVCF_CURRENTFILTER_MASK 0x0000ffff /* Current filter cutoff frequency of specified channel */ -#define CVCF_CURRENTFILTER 0x10000002 +SUB_REG(CVCF, CURRENTVOL, 0xffff0000) /* Current linear volume of specified channel */ +SUB_REG(CVCF, CURRENTFILTER, 0x0000ffff) /* Current filter cutoff frequency of specified channel */ #define VTFT 0x03 /* Volume target and filter cutoff target register */ -#define VTFT_VOLUMETARGET_MASK 0xffff0000 /* Volume target of specified channel */ -#define VTFT_VOLUMETARGET 0x10100003 -#define VTFT_FILTERTARGET_MASK 0x0000ffff /* Filter cutoff target of specified channel */ -#define VTFT_FILTERTARGET 0x10000003 +SUB_REG(VTFT, VOLUMETARGET, 0xffff0000) /* Volume target of specified channel */ +SUB_REG(VTFT, FILTERTARGET, 0x0000ffff) /* Filter cutoff target of specified channel */ #define Z1 0x05 /* Filter delay memory 1 register */ #define Z2 0x04 /* Filter delay memory 2 register */ #define PSST 0x06 /* Send C amount and loop start address register */ -#define PSST_FXSENDAMOUNT_C_MASK 0xff000000 /* Linear level of channel output sent to FX send bus C */ - -#define PSST_FXSENDAMOUNT_C 0x08180006 - -#define PSST_LOOPSTARTADDR_MASK 0x00ffffff /* Loop start address of the specified channel */ -#define PSST_LOOPSTARTADDR 0x18000006 +SUB_REG(PSST, FXSENDAMOUNT_C, 0xff000000) /* Linear level of channel output sent to FX send bus C */ +SUB_REG(PSST, LOOPSTARTADDR, 0x00ffffff) /* Loop start address of the specified channel */ #define DSL 0x07 /* Send D amount and loop end address register */ -#define DSL_FXSENDAMOUNT_D_MASK 0xff000000 /* Linear level of channel output sent to FX send bus D */ - -#define DSL_FXSENDAMOUNT_D 0x08180007 - -#define DSL_LOOPENDADDR_MASK 0x00ffffff /* Loop end address of the specified channel */ -#define DSL_LOOPENDADDR 0x18000007 +SUB_REG(DSL, FXSENDAMOUNT_D, 0xff000000) /* Linear level of channel output sent to FX send bus D */ +SUB_REG(DSL, LOOPENDADDR, 0x00ffffff) /* Loop end address of the specified channel */ #define CCCA 0x08 /* Filter Q, interp. ROM, byte size, cur. addr register */ -#define CCCA_RESONANCE_MASK 0xf0000000 /* Lowpass filter resonance (Q) height */ -#define CCCA_RESONANCE 0x041c0008 +SUB_REG(CCCA, RESONANCE, 0xf0000000) /* Lowpass filter resonance (Q) height */ #define CCCA_INTERPROM_MASK 0x0e000000 /* Selects passband of interpolation ROM */ /* 1 == full band, 7 == lowpass */ /* ROM 0 is used when pitch shifting downward or less */ @@ -447,27 +453,24 @@ #define CCCA_INTERPROM_7 0x0e000000 /* Select interpolation ROM 7 */ #define CCCA_8BITSELECT 0x01000000 /* 1 = Sound memory for this channel uses 8-bit samples */ /* 8-bit samples are unsigned, 16-bit ones signed */ -#define CCCA_CURRADDR_MASK 0x00ffffff /* Current address of the selected channel */ -#define CCCA_CURRADDR 0x18000008 +SUB_REG(CCCA, CURRADDR, 0x00ffffff) /* Current address of the selected channel */ #define CCR 0x09 /* Cache control register */ -#define CCR_CACHEINVALIDSIZE 0x07190009 -#define CCR_CACHEINVALIDSIZE_MASK 0xfe000000 /* Number of invalid samples before the read address */ +SUB_REG(CCR, CACHEINVALIDSIZE, 0xfe000000) /* Number of invalid samples before the read address */ #define CCR_CACHELOOPFLAG 0x01000000 /* 1 = Cache has a loop service pending */ #define CCR_INTERLEAVEDSAMPLES 0x00800000 /* 1 = A cache service will fetch interleaved samples */ /* Auto-set from CPF_STEREO_MASK */ #define CCR_WORDSIZEDSAMPLES 0x00400000 /* 1 = A cache service will fetch word sized samples */ /* Auto-set from CCCA_8BITSELECT */ -#define CCR_READADDRESS 0x06100009 -#define CCR_READADDRESS_MASK 0x003f0000 /* Next cached sample to play */ -#define CCR_LOOPINVALSIZE 0x0000fe00 /* Number of invalid samples in cache prior to loop */ +SUB_REG(CCR, READADDRESS, 0x003f0000) /* Next cached sample to play */ +SUB_REG(CCR, LOOPINVALSIZE, 0x0000fe00) /* Number of invalid samples in cache prior to loop */ /* NOTE: This is valid only if CACHELOOPFLAG is set */ #define CCR_LOOPFLAG 0x00000100 /* Set for a single sample period when a loop occurs */ -#define CCR_CACHELOOPADDRHI 0x000000ff /* CLP_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set */ +SUB_REG(CCR, CACHELOOPADDRHI, 0x000000ff) /* CLP_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set */ #define CLP 0x0a /* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */ /* NOTE: This register is normally not used */ -#define CLP_CACHELOOPADDR 0x0000ffff /* Cache loop address low word */ +SUB_REG(CLP, CACHELOOPADDR, 0x0000ffff) /* Cache loop address low word */ #define FXRT 0x0b /* Effects send routing register */ /* NOTE: It is illegal to assign the same routing to */ @@ -537,20 +540,17 @@ #define IP_UNITY 0x0000e000 /* Unity pitch shift */ #define IFATN 0x19 /* Initial filter cutoff and attenuation register */ -#define IFATN_FILTERCUTOFF_MASK 0x0000ff00 /* Initial filter cutoff frequency in exponential units */ +SUB_REG(IFATN, FILTERCUTOFF, 0x0000ff00) /* Initial filter cutoff frequency in exponential units */ /* 6 most significant bits are semitones */ /* 2 least significant bits are fractions */ -#define IFATN_FILTERCUTOFF 0x08080019 -#define IFATN_ATTENUATION_MASK 0x000000ff /* Initial attenuation in 0.375dB steps */ -#define IFATN_ATTENUATION 0x08000019 +SUB_REG(IFATN, ATTENUATION, 0x000000ff) /* Initial attenuation in 0.375dB steps */ #define PEFE 0x1a /* Pitch envelope and filter envelope amount register */ -#define PEFE_PITCHAMOUNT_MASK 0x0000ff00 /* Pitch envlope amount */ +SUB_REG(PEFE, PITCHAMOUNT, 0x0000ff00) /* Pitch envlope amount */ /* Signed 2's complement, +/- one octave peak extremes */ -#define PEFE_PITCHAMOUNT 0x0808001a -#define PEFE_FILTERAMOUNT_MASK 0x000000ff /* Filter envlope amount */ +SUB_REG(PEFE, FILTERAMOUNT, 0x000000ff) /* Filter envlope amount */ /* Signed 2's complement, +/- six octaves peak extremes */ -#define PEFE_FILTERAMOUNT 0x0800001a + #define FMMOD 0x1b /* Vibrato/filter modulation from LFO register */ #define FMMOD_MODVIBRATO 0x0000ff00 /* Vibrato LFO modulation depth */ @@ -793,22 +793,19 @@ #define SRCS_SPDIFRATE_96 0x00080000 #define MICIDX 0x63 /* Microphone recording buffer index register */ -#define MICIDX_MASK 0x0000ffff /* 16-bit value */ -#define MICIDX_IDX 0x10000063 +SUB_REG(MICIDX, IDX, 0x0000ffff) #define ADCIDX 0x64 /* ADC recording buffer index register */ -#define ADCIDX_MASK 0x0000ffff /* 16 bit index field */ -#define ADCIDX_IDX 0x10000064 +SUB_REG(ADCIDX, IDX, 0x0000ffff) #define A_ADCIDX 0x63 -#define A_ADCIDX_IDX 0x10000063 +SUB_REG(A_ADCIDX, IDX, 0x0000ffff) #define A_MICIDX 0x64 -#define A_MICIDX_IDX 0x10000064 +SUB_REG(A_MICIDX, IDX, 0x0000ffff) #define FXIDX 0x65 /* FX recording buffer index register */ -#define FXIDX_MASK 0x0000ffff /* 16-bit value */ -#define FXIDX_IDX 0x10000065 +SUB_REG(FXIDX, IDX, 0x0000ffff) /* The 32-bit HLIEx and HLIPx registers all have one bit per channel control/status */ #define HLIEL 0x66 /* Channel half loop interrupt enable low register */ @@ -852,8 +849,8 @@ #define A_SPDIF_44100 0x00000080 #define A_SPDIF_MUTED 0x000000c0 -#define A_I2S_CAPTURE_RATE_MASK 0x00000e00 /* This sets the capture PCM rate, but it is */ -#define A_I2S_CAPTURE_RATE 0x03090076 /* unclear if this sets the ADC rate as well. */ +SUB_REG_NC(A_EHC, A_I2S_CAPTURE_RATE, 0x00000e00) /* This sets the capture PCM rate, but it is */ + /* unclear if this sets the ADC rate as well. */ #define A_I2S_CAPTURE_48000 0x0 #define A_I2S_CAPTURE_192000 0x1 #define A_I2S_CAPTURE_96000 0x2 -- 2.7.4