From 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 Mon Sep 17 00:00:00 2001
From: Dave Liu <daveliu@freescale.com>
Date: Fri, 3 Nov 2006 19:33:44 -0600
Subject: [PATCH] mpc83xx: Add MPC8360EMDS basic board support

Add support for the Freescale MPC8360EMDS board.
Includes DDR, DUART, Local Bus, PCI.
---
 MAKEALL                         |   2 +-
 Makefile                        |  27 +-
 board/mpc8360emds/Makefile      |  50 ++++
 board/mpc8360emds/config.mk     |  28 ++
 board/mpc8360emds/mpc8360emds.c | 574 +++++++++++++++++++++++++++++++++++++++
 board/mpc8360emds/pci.c         | 294 ++++++++++++++++++++
 board/mpc8360emds/u-boot.lds    | 123 +++++++++
 cpu/mpc83xx/cpu.c               |  54 +++-
 cpu/mpc83xx/spd_sdram.c         | 304 +++++++++++----------
 cpu/mpc83xx/speed.c             | 209 +++++++-------
 include/asm-ppc/e300.h          |   2 +
 include/asm-ppc/global_data.h   |  14 +-
 include/configs/MPC8360EMDS.h   | 585 ++++++++++++++++++++++++++++++++++++++++
 include/mpc83xx.h               | 102 ++++++-
 14 files changed, 2092 insertions(+), 276 deletions(-)
 create mode 100644 board/mpc8360emds/Makefile
 create mode 100644 board/mpc8360emds/config.mk
 create mode 100644 board/mpc8360emds/mpc8360emds.c
 create mode 100644 board/mpc8360emds/pci.c
 create mode 100644 board/mpc8360emds/u-boot.lds
 create mode 100644 include/configs/MPC8360EMDS.h

diff --git a/MAKEALL b/MAKEALL
index c29dd54..6232761 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -130,7 +130,7 @@ LIST_8260="	\
 #########################################################################
 
 LIST_83xx="	\
-	TQM834x		MPC8349EMDS	MPC8349ITX			\
+	TQM834x		MPC8349EMDS	MPC8349ITX	MPC8360EMDS	\
 "
 
 
diff --git a/Makefile b/Makefile
index ac7ca4a..323aafc 100644
--- a/Makefile
+++ b/Makefile
@@ -1582,15 +1582,36 @@ r5200_config :		unconfig
 ## MPC83xx Systems
 #########################################################################
 
-MPC8349ADS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads
-
 TQM834x_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
 
 MPC8349EMDS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
 
+MPC8360EMDS_config \
+MPC8360EMDS_HOST_33_config \
+MPC8360EMDS_HOST_66_config \
+MPC8360EMDS_SLAVE_config:	unconfig
+	@echo "" >include/config.h ; \
+	if [ "$(findstring _HOST_,$@)" ] ; then \
+		echo -n "... PCI HOST " ; \
+		echo "#define CONFIG_PCI" >>include/config.h ; \
+	fi ; \
+	if [ "$(findstring _SLAVE_,$@)" ] ; then \
+		echo "...PCI SLAVE 66M"  ; \
+		echo "#define CONFIG_PCI" >>include/config.h ; \
+		echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+	fi ; \
+	if [ "$(findstring _33_,$@)" ] ; then \
+		echo -n "...33M ..." ; \
+		echo "#define PCI_33M" >>include/config.h ; \
+	fi ; \
+	if [ "$(findstring _66_,$@)" ] ; then \
+		echo -n "...66M..." ; \
+		echo "#define PCI_66M" >>include/config.h ; \
+	fi ;
+	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
+
 MPC8349ITX_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx
 
diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile
new file mode 100644
index 0000000..5ec7a87
--- /dev/null
+++ b/board/mpc8360emds/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o pci.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk
new file mode 100644
index 0000000..9ace886
--- /dev/null
+++ b/board/mpc8360emds/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC8360EMDS
+#
+
+TEXT_BASE = 0xFE000000
diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c
new file mode 100644
index 0000000..d70a4c3
--- /dev/null
+++ b/board/mpc8360emds/mpc8360emds.c
@@ -0,0 +1,574 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on board/mpc8349emds/mpc8349emds.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <command.h>
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#else
+#include <asm/mmu.h>
+#endif
+
+int board_early_init_f(void)
+{
+	volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
+
+	/* Enable flash write */
+	bcsr[0xa] &= ~0x04;
+
+	return 0;
+}
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+int fixed_sdram(void);
+void sdram_init(void);
+
+long int initdram(int board_type)
+{
+	volatile immap_t *im = (immap_t *) CFG_IMMRBAR;
+	u32 msize = 0;
+
+	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+		return -1;
+
+	/* DDR SDRAM - Main SODIMM */
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+#if defined(CONFIG_SPD_EEPROM)
+	msize = spd_sdram();
+#else
+	msize = fixed_sdram();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+	/*
+	 * Initialize DDR ECC byte
+	 */
+	ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+	/*
+	 * Initialize SDRAM if it is on local bus.
+	 */
+	sdram_init();
+	puts("   DDR RAM: ");
+	/* return total bus SDRAM size(bytes)  -- DDR */
+	return (msize * 1024 * 1024);
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+	volatile immap_t *im = (immap_t *) CFG_IMMRBAR;
+	u32 msize = 0;
+	u32 ddr_size;
+	u32 ddr_size_log2;
+
+	msize = CFG_DDR_SIZE;
+	for (ddr_size = msize << 20, ddr_size_log2 = 0;
+	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
+		if (ddr_size & 1) {
+			return -1;
+		}
+	}
+	im->sysconf.ddrlaw[0].ar =
+	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+#if (CFG_DDR_SIZE != 256)
+#warning Currenly any ddr size other than 256 is not supported
+#endif
+	im->ddr.csbnds[0].csbnds = 0x00000007;
+	im->ddr.csbnds[1].csbnds = 0x0008000f;
+
+	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[1] = CFG_DDR_CONFIG;
+
+	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+	im->ddr.sdram_cfg = CFG_DDR_CONTROL;
+
+	im->ddr.sdram_mode = CFG_DDR_MODE;
+	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	udelay(200);
+	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+
+	return msize;
+}
+#endif				/*!CFG_SPD_EEPROM */
+
+int checkboard(void)
+{
+	puts("Board: Freescale MPC8360EMDS\n");
+	return 0;
+}
+
+/*
+ * if MPC8360EMDS is soldered with SDRAM
+ */
+#if defined(CFG_BR2_PRELIM)  \
+	&& defined(CFG_OR2_PRELIM) \
+	&& defined(CFG_LBLAWBAR2_PRELIM) \
+	&& defined(CFG_LBLAWAR2_PRELIM)
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+
+void sdram_init(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile lbus83xx_t *lbc = &immap->lbus;
+	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+
+	puts("\n   SDRAM on Local Bus: ");
+	print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	/*
+	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+	 */
+	/*setup mtrpt, lsrt and lbcr for LB bus */
+	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CFG_LBC_LSRT;
+	asm("sync");
+
+	/*
+	 * Configure the SDRAM controller Machine Mode Register.
+	 */
+	lbc->lsdmr = CFG_LBC_LSDMR_5;	/* Normal Operation */
+	lbc->lsdmr = CFG_LBC_LSDMR_1;	/* Precharge All Banks */
+	asm("sync");
+	*sdram_addr = 0xff;
+	udelay(100);
+
+	/*
+	 * We need do 8 times auto refresh operation.
+	 */
+	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	asm("sync");
+	*sdram_addr = 0xff;	/* 1 times */
+	udelay(100);
+	*sdram_addr = 0xff;	/* 2 times */
+	udelay(100);
+	*sdram_addr = 0xff;	/* 3 times */
+	udelay(100);
+	*sdram_addr = 0xff;	/* 4 times */
+	udelay(100);
+	*sdram_addr = 0xff;	/* 5 times */
+	udelay(100);
+	*sdram_addr = 0xff;	/* 6 times */
+	udelay(100);
+	*sdram_addr = 0xff;	/* 7 times */
+	udelay(100);
+	*sdram_addr = 0xff;	/* 8 times */
+	udelay(100);
+
+	/* Mode register write operation */
+	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	asm("sync");
+	*(sdram_addr + 0xcc) = 0xff;
+	udelay(100);
+
+	/* Normal operation */
+	lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000;
+	asm("sync");
+	*sdram_addr = 0xff;
+	udelay(100);
+}
+#else
+void sdram_init(void)
+{
+	puts("SDRAM on Local Bus is NOT available!\n");
+}
+#endif
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
+/*
+ * ECC user commands
+ */
+void ecc_print_status(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile ddr83xx_t *ddr = &immap->ddr;
+
+	printf("\nECC mode: %s\n\n",
+	       (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+
+	/* Interrupts */
+	printf("Memory Error Interrupt Enable:\n");
+	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
+	       (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
+	printf("  Single-Bit Error Interrupt Enable: %d\n",
+	       (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
+	printf("  Memory Select Error Interrupt Enable: %d\n\n",
+	       (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
+
+	/* Error disable */
+	printf("Memory Error Disable:\n");
+	printf("  Multiple-Bit Error Disable: %d\n",
+	       (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
+	printf("  Sinle-Bit Error Disable: %d\n",
+	       (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
+	printf("  Memory Select Error Disable: %d\n\n",
+	       (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
+
+	/* Error injection */
+	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
+	       ddr->data_err_inject_hi, ddr->data_err_inject_lo);
+
+	printf("Memory Data Path Error Injection Mask ECC:\n");
+	printf("  ECC Mirror Byte: %d\n",
+	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
+	printf("  ECC Injection Enable: %d\n",
+	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
+	printf("  ECC Error Injection Mask: 0x%02x\n\n",
+	       ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
+
+	/* SBE counter/threshold */
+	printf("Memory Single-Bit Error Management (0..255):\n");
+	printf("  Single-Bit Error Threshold: %d\n",
+	       (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
+	printf("  Single-Bit Error Counter: %d\n\n",
+	       (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
+
+	/* Error detect */
+	printf("Memory Error Detect:\n");
+	printf("  Multiple Memory Errors: %d\n",
+	       (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
+	printf("  Multiple-Bit Error: %d\n",
+	       (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
+	printf("  Single-Bit Error: %d\n",
+	       (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
+	printf("  Memory Select Error: %d\n\n",
+	       (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
+
+	/* Capture data */
+	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
+	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
+	       ddr->capture_data_hi, ddr->capture_data_lo);
+	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
+	       ddr->capture_ecc & CAPTURE_ECC_ECE);
+
+	printf("Memory Error Attributes Capture:\n");
+	printf(" Data Beat Number: %d\n",
+	       (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
+	       ECC_CAPT_ATTR_BNUM_SHIFT);
+	printf("  Transaction Size: %d\n",
+	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
+	       ECC_CAPT_ATTR_TSIZ_SHIFT);
+	printf("  Transaction Source: %d\n",
+	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
+	       ECC_CAPT_ATTR_TSRC_SHIFT);
+	printf("  Transaction Type: %d\n",
+	       (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
+	       ECC_CAPT_ATTR_TTYP_SHIFT);
+	printf("  Error Information Valid: %d\n\n",
+	       ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
+}
+
+int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile ddr83xx_t *ddr = &immap->ddr;
+	volatile u32 val;
+	u64 *addr;
+	u32 count;
+	register u64 *i;
+	u32 ret[2];
+	u32 pattern[2];
+	u32 writeback[2];
+
+	/* The pattern is written into memory to generate error */
+	pattern[0] = 0xfedcba98UL;
+	pattern[1] = 0x76543210UL;
+
+	/* After injecting error, re-initialize the memory with the value */
+	writeback[0] = 0x01234567UL;
+	writeback[1] = 0x89abcdefUL;
+
+	if (argc > 4) {
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	if (argc == 2) {
+		if (strcmp(argv[1], "status") == 0) {
+			ecc_print_status();
+			return 0;
+		} else if (strcmp(argv[1], "captureclear") == 0) {
+			ddr->capture_address = 0;
+			ddr->capture_data_hi = 0;
+			ddr->capture_data_lo = 0;
+			ddr->capture_ecc = 0;
+			ddr->capture_attributes = 0;
+			return 0;
+		}
+	}
+	if (argc == 3) {
+		if (strcmp(argv[1], "sbecnt") == 0) {
+			val = simple_strtoul(argv[2], NULL, 10);
+			if (val > 255) {
+				printf("Incorrect Counter value, "
+				       "should be 0..255\n");
+				return 1;
+			}
+
+			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
+			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
+
+			ddr->err_sbe = val;
+			return 0;
+		} else if (strcmp(argv[1], "sbethr") == 0) {
+			val = simple_strtoul(argv[2], NULL, 10);
+			if (val > 255) {
+				printf("Incorrect Counter value, "
+				       "should be 0..255\n");
+				return 1;
+			}
+
+			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
+			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
+
+			ddr->err_sbe = val;
+			return 0;
+		} else if (strcmp(argv[1], "errdisable") == 0) {
+			val = ddr->err_disable;
+
+			if (strcmp(argv[2], "+sbe") == 0) {
+				val |= ECC_ERROR_DISABLE_SBED;
+			} else if (strcmp(argv[2], "+mbe") == 0) {
+				val |= ECC_ERROR_DISABLE_MBED;
+			} else if (strcmp(argv[2], "+mse") == 0) {
+				val |= ECC_ERROR_DISABLE_MSED;
+			} else if (strcmp(argv[2], "+all") == 0) {
+				val |= (ECC_ERROR_DISABLE_SBED |
+					ECC_ERROR_DISABLE_MBED |
+					ECC_ERROR_DISABLE_MSED);
+			} else if (strcmp(argv[2], "-sbe") == 0) {
+				val &= ~ECC_ERROR_DISABLE_SBED;
+			} else if (strcmp(argv[2], "-mbe") == 0) {
+				val &= ~ECC_ERROR_DISABLE_MBED;
+			} else if (strcmp(argv[2], "-mse") == 0) {
+				val &= ~ECC_ERROR_DISABLE_MSED;
+			} else if (strcmp(argv[2], "-all") == 0) {
+				val &= ~(ECC_ERROR_DISABLE_SBED |
+					 ECC_ERROR_DISABLE_MBED |
+					 ECC_ERROR_DISABLE_MSED);
+			} else {
+				printf("Incorrect err_disable field\n");
+				return 1;
+			}
+
+			ddr->err_disable = val;
+			__asm__ __volatile__("sync");
+			__asm__ __volatile__("isync");
+			return 0;
+		} else if (strcmp(argv[1], "errdetectclr") == 0) {
+			val = ddr->err_detect;
+
+			if (strcmp(argv[2], "mme") == 0) {
+				val |= ECC_ERROR_DETECT_MME;
+			} else if (strcmp(argv[2], "sbe") == 0) {
+				val |= ECC_ERROR_DETECT_SBE;
+			} else if (strcmp(argv[2], "mbe") == 0) {
+				val |= ECC_ERROR_DETECT_MBE;
+			} else if (strcmp(argv[2], "mse") == 0) {
+				val |= ECC_ERROR_DETECT_MSE;
+			} else if (strcmp(argv[2], "all") == 0) {
+				val |= (ECC_ERROR_DETECT_MME |
+					ECC_ERROR_DETECT_MBE |
+					ECC_ERROR_DETECT_SBE |
+					ECC_ERROR_DETECT_MSE);
+			} else {
+				printf("Incorrect err_detect field\n");
+				return 1;
+			}
+
+			ddr->err_detect = val;
+			return 0;
+		} else if (strcmp(argv[1], "injectdatahi") == 0) {
+			val = simple_strtoul(argv[2], NULL, 16);
+
+			ddr->data_err_inject_hi = val;
+			return 0;
+		} else if (strcmp(argv[1], "injectdatalo") == 0) {
+			val = simple_strtoul(argv[2], NULL, 16);
+
+			ddr->data_err_inject_lo = val;
+			return 0;
+		} else if (strcmp(argv[1], "injectecc") == 0) {
+			val = simple_strtoul(argv[2], NULL, 16);
+			if (val > 0xff) {
+				printf("Incorrect ECC inject mask, "
+				       "should be 0x00..0xff\n");
+				return 1;
+			}
+			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
+
+			ddr->ecc_err_inject = val;
+			return 0;
+		} else if (strcmp(argv[1], "inject") == 0) {
+			val = ddr->ecc_err_inject;
+
+			if (strcmp(argv[2], "en") == 0)
+				val |= ECC_ERR_INJECT_EIEN;
+			else if (strcmp(argv[2], "dis") == 0)
+				val &= ~ECC_ERR_INJECT_EIEN;
+			else
+				printf("Incorrect command\n");
+
+			ddr->ecc_err_inject = val;
+			__asm__ __volatile__("sync");
+			__asm__ __volatile__("isync");
+			return 0;
+		} else if (strcmp(argv[1], "mirror") == 0) {
+			val = ddr->ecc_err_inject;
+
+			if (strcmp(argv[2], "en") == 0)
+				val |= ECC_ERR_INJECT_EMB;
+			else if (strcmp(argv[2], "dis") == 0)
+				val &= ~ECC_ERR_INJECT_EMB;
+			else
+				printf("Incorrect command\n");
+
+			ddr->ecc_err_inject = val;
+			return 0;
+		}
+	}
+	if (argc == 4) {
+		if (strcmp(argv[1], "testdw") == 0) {
+			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+			count = simple_strtoul(argv[3], NULL, 16);
+
+			if ((u32) addr % 8) {
+				printf("Address not alligned on "
+				       "double word boundary\n");
+				return 1;
+			}
+			disable_interrupts();
+
+			for (i = addr; i < addr + count; i++) {
+
+				/* enable injects */
+				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__("sync");
+				__asm__ __volatile__("isync");
+
+				/* write memory location injecting errors */
+				ppcDWstore((u32 *) i, pattern);
+
+				/* disable injects */
+				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__("sync");
+				__asm__ __volatile__("isync");
+
+				/* read data, this generates ECC error */
+				ppcDWload((u32 *) i, ret);
+
+				/* re-initialize memory, double word write the location again,
+				 * generates new ECC code this time */
+				ppcDWstore((u32 *) i, writeback);
+			}
+			enable_interrupts();
+			return 0;
+		}
+		if (strcmp(argv[1], "testword") == 0) {
+			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+			count = simple_strtoul(argv[3], NULL, 16);
+
+			if ((u32) addr % 8) {
+				printf("Address not alligned on "
+				       "double word boundary\n");
+				return 1;
+			}
+			disable_interrupts();
+
+			for (i = addr; i < addr + count; i++) {
+
+				/* enable injects */
+				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__("sync");
+				__asm__ __volatile__("isync");
+
+				/* write memory location injecting errors */
+				*(u32 *) i = 0xfedcba98UL;
+				__asm__ __volatile__("sync");
+
+				/* sub double word write,
+				 * bus will read-modify-write,
+				 * generates ECC error */
+				*((u32 *) i + 1) = 0x76543210UL;
+				__asm__ __volatile__("sync");
+
+				/* disable injects */
+				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__("sync");
+				__asm__ __volatile__("isync");
+
+				/* re-initialize memory,
+				 * double word write the location again,
+				 * generates new ECC code this time */
+				ppcDWstore((u32 *) i, writeback);
+			}
+			enable_interrupts();
+			return 0;
+		}
+	}
+	printf("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+}
+
+U_BOOT_CMD(ecc, 4, 0, do_ecc,
+	   "ecc     - support for DDR ECC features\n",
+	   "status              - print out status info\n"
+	   "ecc captureclear        - clear capture regs data\n"
+	   "ecc sbecnt <val>        - set Single-Bit Error counter\n"
+	   "ecc sbethr <val>        - set Single-Bit Threshold\n"
+	   "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
+	   "  [-|+]sbe - Single-Bit Error\n"
+	   "  [-|+]mbe - Multiple-Bit Error\n"
+	   "  [-|+]mse - Memory Select Error\n"
+	   "  [-|+]all - all errors\n"
+	   "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
+	   "  mme - Multiple Memory Errors\n"
+	   "  sbe - Single-Bit Error\n"
+	   "  mbe - Multiple-Bit Error\n"
+	   "  mse - Memory Select Error\n"
+	   "  all - all errors\n"
+	   "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
+	   "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
+	   "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
+	   "ecc inject <en|dis>    - enable/disable error injection\n"
+	   "ecc mirror <en|dis>    - enable/disable mirror byte\n"
+	   "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
+	   "  - enables injects\n"
+	   "  - writes pattern injecting errors with double word access\n"
+	   "  - disables injects\n"
+	   "  - reads pattern back with double word access, generates error\n"
+	   "  - re-inits memory\n"
+	   "ecc testword <addr> <cnt>  - test mem region with word access:\n"
+	   "  - enables injects\n"
+	   "  - writes pattern injecting errors with word access\n"
+	   "  - writes pattern with word access, generates error\n"
+	   "  - disables injects\n" "  - re-inits memory");
+#endif				/* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c
new file mode 100644
index 0000000..880b2ec
--- /dev/null
+++ b/board/mpc8360emds/pci.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/*
+ * PCI Configuration space access support for MPC83xx PCI Bridge
+ */
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <pci.h>
+#include <i2c.h>
+
+#include <asm/i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_PCI)
+#define PCI_FUNCTION_CONFIG   0x44
+#define PCI_FUNCTION_CFG_LOCK 0x20
+
+/*
+ * Initialize PCI Devices, report devices found
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc83xxemds_config_table[] = {
+	{
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 pci_cfgfunc_config_device,
+	 {PCI_ENET0_IOADDR,
+	  PCI_ENET0_MEMADDR,
+	  PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
+	 },
+	{}
+}
+#endif
+static struct pci_controller hose[] = {
+	{
+#ifndef CONFIG_PCI_PNP
+	      config_table:pci_mpc83xxemds_config_table,
+#endif
+	 },
+};
+
+/**********************************************************************
+ * pci_init_board()
+ *********************************************************************/
+void pci_init_board(void)
+#ifdef CONFIG_PCISLAVE
+{
+	u16 reg16;
+	volatile immap_t *immr;
+	volatile law83xx_t *pci_law;
+	volatile pot83xx_t *pci_pot;
+	volatile pcictrl83xx_t *pci_ctrl;
+	volatile pciconf83xx_t *pci_conf;
+
+	immr = (immap_t *) CFG_IMMRBAR;
+	pci_law = immr->sysconf.pcilaw;
+	pci_pot = immr->ios.pot;
+	pci_ctrl = immr->pci_ctrl;
+	pci_conf = immr->pci_conf;
+	/*
+	 * Configure PCI Inbound Translation Windows
+	 */
+	pci_ctrl[0].pitar0 = 0x0;
+	pci_ctrl[0].pibar0 = 0x0;
+	pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
+	    PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
+
+	pci_ctrl[0].pitar1 = 0x0;
+	pci_ctrl[0].pibar1 = 0x0;
+	pci_ctrl[0].piebar1 = 0x0;
+	pci_ctrl[0].piwar1 &= ~PIWAR_EN;
+
+	pci_ctrl[0].pitar2 = 0x0;
+	pci_ctrl[0].pibar2 = 0x0;
+	pci_ctrl[0].piebar2 = 0x0;
+	pci_ctrl[0].piwar2 &= ~PIWAR_EN;
+
+	hose[0].first_busno = 0;
+	hose[0].last_busno = 0xff;
+	pci_setup_indirect(&hose[0],
+			   (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304));
+	reg16 = 0xff;
+
+	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				  PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_LATENCY_TIMER, 0x80);
+
+	/*
+	 * Unlock configuration lock in PCI function configuration register.
+	 */
+	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				  PCI_FUNCTION_CONFIG, &reg16);
+	reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
+	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_FUNCTION_CONFIG, reg16);
+
+	printf("Enabled PCI 32bit Agent Mode\n");
+}
+#else
+{
+	volatile immap_t *immr;
+	volatile clk83xx_t *clk;
+	volatile law83xx_t *pci_law;
+	volatile pot83xx_t *pci_pot;
+	volatile pcictrl83xx_t *pci_ctrl;
+	volatile pciconf83xx_t *pci_conf;
+
+	u8 val8, orig_i2c_bus;
+	u16 reg16;
+	u32 val32;
+	u32 dev;
+
+	immr = (immap_t *) CFG_IMMRBAR;
+	clk = (clk83xx_t *) & immr->clk;
+	pci_law = immr->sysconf.pcilaw;
+	pci_pot = immr->ios.pot;
+	pci_ctrl = immr->pci_ctrl;
+	pci_conf = immr->pci_conf;
+	/*
+	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+	 */
+	val32 = clk->occr;
+	udelay(2000);
+#if defined(PCI_66M)
+	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+	printf("PCI clock is 66MHz\n");
+#elif defined(PCI_33M)
+	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
+	    OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
+	printf("PCI clock is 33MHz\n");
+#else
+	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+	printf("PCI clock is 66MHz\n");
+#endif
+	udelay(2000);
+
+	/*
+	 * Configure PCI Local Access Windows
+	 */
+	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
+
+	/*
+	 * Configure PCI Outbound Translation Windows
+	 */
+
+	/* PCI mem space - prefetch */
+	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].pocmr =
+	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
+
+	/* PCI mmio - non-prefetch mem space */
+	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+	/* PCI IO space */
+	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
+
+	/*
+	 * Configure PCI Inbound Translation Windows
+	 */
+	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
+	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
+	pci_ctrl[0].piebar1 = 0x0;
+	pci_ctrl[0].piwar1 =
+	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
+	    PIWAR_IWS_2G;
+
+	/*
+	 * Assign PIB PMC slot to desired PCI bus
+	 */
+
+	mpc83xx_i2c = (i2c_t *) (CFG_IMMRBAR + CFG_I2C2_OFFSET);
+	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	val8 = 0;
+	i2c_write(0x23, 0x6, 1, &val8, 1);
+	i2c_write(0x23, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x23, 0x2, 1, &val8, 1);
+	i2c_write(0x23, 0x3, 1, &val8, 1);
+
+	val8 = 0;
+	i2c_write(0x26, 0x6, 1, &val8, 1);
+	val8 = 0x34;
+	i2c_write(0x26, 0x7, 1, &val8, 1);
+
+	val8 = 0xf3;		/*PMC1, PMC2, PMC3 slot to PCI bus */
+	i2c_write(0x26, 0x2, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x26, 0x3, 1, &val8, 1);
+
+	val8 = 0;
+	i2c_write(0x27, 0x6, 1, &val8, 1);
+	i2c_write(0x27, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x27, 0x2, 1, &val8, 1);
+	val8 = 0xef;
+	i2c_write(0x27, 0x3, 1, &val8, 1);
+	asm("eieio");
+
+	/*
+	 * Release PCI RST Output signal
+	 */
+	udelay(2000);
+	pci_ctrl[0].gcr = 1;
+	udelay(2000);
+
+	hose[0].first_busno = 0;
+	hose[0].last_busno = 0xff;
+
+	/* PCI memory prefetch space */
+	pci_set_region(hose[0].regions + 0,
+		       CFG_PCI_MEM_BASE,
+		       CFG_PCI_MEM_PHYS,
+		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+
+	/* PCI memory space */
+	pci_set_region(hose[0].regions + 1,
+		       CFG_PCI_MMIO_BASE,
+		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
+
+	/* PCI IO space */
+	pci_set_region(hose[0].regions + 2,
+		       CFG_PCI_IO_BASE,
+		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+	/* System memory space */
+	pci_set_region(hose[0].regions + 3,
+		       CFG_PCI_SLV_MEM_LOCAL,
+		       CFG_PCI_SLV_MEM_BUS,
+		       CFG_PCI_SLV_MEM_SIZE,
+		       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	hose[0].region_count = 4;
+
+	pci_setup_indirect(&hose[0],
+			   (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304));
+
+	pci_register_hose(hose);
+
+	/*
+	 * Write command register
+	 */
+	reg16 = 0xff;
+	dev = PCI_BDF(0, 0, 0);
+	pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
+	pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+	printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n");
+
+	/*
+	 * Hose scan.
+	 */
+	hose->last_busno = pci_hose_scan(hose);
+}
+#endif				/* CONFIG_PCISLAVE */
+#endif				/* CONFIG_PCI */
diff --git a/board/mpc8360emds/u-boot.lds b/board/mpc8360emds/u-boot.lds
new file mode 100644
index 0000000..937c87a
--- /dev/null
+++ b/board/mpc8360emds/u-boot.lds
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc83xx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 4e82a8b..1de337b 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -43,28 +43,70 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int checkcpu(void)
 {
+	volatile immap_t *immr;
 	ulong clock = gd->cpu_clk;
 	u32 pvr = get_pvr();
+	u32 spridr;
 	char buf[32];
 
+	immr = (immap_t *)CFG_IMMRBAR;
+
 	if ((pvr & 0xFFFF0000) != PVR_83xx) {
 		puts("Not MPC83xx Family!!!\n");
 		return -1;
 	}
 
-	puts("CPU:   MPC83xx, ");
-	switch(pvr) {
-	case PVR_8349_REV10:
+	spridr = immr->sysconf.spridr;
+	puts("CPU: ");
+	switch(spridr) {
+	case SPR_8349E_REV10:
+	case SPR_8349E_REV11:
+		puts("MPC8349E, ");
+		break;
+	case SPR_8349_REV10:
+	case SPR_8349_REV11:
+		puts("MPC8349, ");
+		break;
+	case SPR_8347E_REV10_TBGA:
+	case SPR_8347E_REV11_TBGA:
+	case SPR_8347E_REV10_PBGA:
+	case SPR_8347E_REV11_PBGA:
+		puts("MPC8347E, ");
+		break;
+	case SPR_8347_REV10_TBGA:
+	case SPR_8347_REV11_TBGA:
+	case SPR_8347_REV10_PBGA:
+	case SPR_8347_REV11_PBGA:
+		puts("MPC8347, ");
+		break;
+	case SPR_8343E_REV10:
+	case SPR_8343E_REV11:
+		puts("MPC8343E, ");
 		break;
-	case PVR_8349_REV11:
+	case SPR_8343_REV10:
+	case SPR_8343_REV11:
+		puts("MPC8343, ");
+		break;
+	case SPR_8360E_REV10:
+	case SPR_8360E_REV11:
+	case SPR_8360E_REV12:
+		puts("MPC8360E, ");
+		break;
+	case SPR_8360_REV10:
+	case SPR_8360_REV11:
+	case SPR_8360_REV12:
+		puts("MPC8360, ");
 		break;
 	default:
 		puts("Rev: Unknown\n");
 		return -1;	/* Not sure what this is */
 	}
-	printf("Rev: %d.%d at %s MHz\n", (pvr & 0xf0) >> 4,
-		(pvr & 0x0f), strmhz(buf, clock));
 
+#if defined(CONFIG_MPC8349)
+	printf("Rev: %02x at %s MHz\n", (spridr & 0x0000FFFF)>>4 |(spridr & 0x0000000F), strmhz(buf, clock));
+#else
+	printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock));
+#endif
 	return 0;
 }
 
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 3dfde8a..acc8c9e 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -4,7 +4,7 @@
  * (C) Copyright 2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
  * (C) Copyright 2003 Motorola Inc.
  * Xianghua Xiao (X.Xiao@motorola.com)
  *
@@ -112,14 +112,10 @@ static void spd_debug(spd_eeprom_t *spd)
 
 long int spd_sdram()
 {
-#ifdef CONFIG_MPC834X
-	int caslat_83xx;  /* For Errata DDR6 */
-#endif
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
 	volatile ddr83xx_t *ddr = &immap->ddr;
 	volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
 	spd_eeprom_t spd;
-	unsigned int tmp, tmp1;
 	unsigned int memsize;
 	unsigned int law_size;
 	unsigned char caslat, caslat_ctrl;
@@ -131,28 +127,7 @@ long int spd_sdram()
 	unsigned sdram_cfg;
 	unsigned int ddrc_ecc_enable;
 
-
         /* Read SPD parameters with I2C */
-#ifdef CFG_83XX_DDR_USES_CS0
-	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
-	ddr->cs_config[0] = ( 1 << 31
-			    | (spd.nrow_addr - 12) << 8
-			    | (spd.ncol_addr - 8) );
-	debug("\n");
-	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
-	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
-
-	if (spd.nrows == 2) {
-		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
-				  | ((banksize(spd.row_dens) >> 23) - 1) );
-		ddr->cs_config[1] = ( 1<<31
-				    | (spd.nrow_addr-12) << 8
-				    | (spd.ncol_addr-8) );
-		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
-		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
-	}
-
-#else
 	CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
 #ifdef SPD_DEBUG
 	spd_debug(&spd);
@@ -183,6 +158,26 @@ long int spd_sdram()
 		return 0;
 	}
         /* Setup DDR chip select register */
+#ifdef CFG_83XX_DDR_USES_CS0
+	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+	ddr->cs_config[0] = ( 1 << 31
+			    | (spd.nrow_addr - 12) << 8
+			    | (spd.ncol_addr - 8) );
+	debug("\n");
+	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
+	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
+
+	if (spd.nrows == 2) {
+		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
+				  | ((banksize(spd.row_dens) >> 23) - 1) );
+		ddr->cs_config[1] = ( 1<<31
+				    | (spd.nrow_addr-12) << 8
+				    | (spd.ncol_addr-8) );
+		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
+		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
+	}
+
+#else
 	ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
 	ddr->cs_config[2] = ( 1 << 31
 			    | (spd.nrow_addr - 12) << 8
@@ -243,8 +238,9 @@ long int spd_sdram()
 	 */
 	caslat = __ilog2(spd.cas_lat);
 
-	if (caslat > 4 ) {
-		printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n", caslat);
+	if (caslat > 6 ) {
+		printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n",
+			spd.cas_lat);
 		return 0;
 	}
 	max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
@@ -256,89 +252,110 @@ long int spd_sdram()
 	ddrc_clk = get_ddr_clk(0) / 1000000;
 
 	if (max_data_rate >= 390) { /* it is DDR 400 */
-		printf("DDR: platform not support DDR 400\n");
-		return 0;
+		if (ddrc_clk <= 410 && ddrc_clk > 350) {
+			/* DDR controller clk at 350~410 */
+			effective_data_rate = 400; /* 5ns */
+			caslat = caslat;
+		} else if (ddrc_clk <= 350 && ddrc_clk > 280) {
+			/* DDR controller clk at 280~350 */
+			effective_data_rate = 333; /* 6ns */
+			if (spd.clk_cycle2 == 0x60) {
+				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
+			}
+		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+			/* DDR controller clk at 230~280 */
+			effective_data_rate = 266; /* 7.5ns */
+			if (spd.clk_cycle3 == 0x75) {
+				caslat = caslat - 2;
+			} else if (spd.clk_cycle2 == 0x60) {
+				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
+			}
+		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+			/* DDR controller clk at 90~230 */
+			effective_data_rate = 200; /* 10ns */
+			if (spd.clk_cycle3 == 0x75) {
+				caslat = caslat - 2;
+			} else if (spd.clk_cycle2 == 0x60) {
+				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
+			}
+		}
 	} else if (max_data_rate >= 323) { /* it is DDR 333 */
 		if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDRC clk at 280~350 */
+			/* DDR controller clk at 280~350 */
 			effective_data_rate = 333; /* 6ns */
 			caslat = caslat;
 		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDRC clk at 230~280 */
+			/* DDR controller clk at 230~280 */
+			effective_data_rate = 266; /* 7.5ns */
 			if (spd.clk_cycle2 == 0x75) {
-				effective_data_rate = 266; /* 7.5ns */
 				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
 			}
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDRC clk at 90~230 */
+			/* DDR controller clk at 90~230 */
+			effective_data_rate = 200; /* 10ns */
 			if (spd.clk_cycle3 == 0xa0) {
-				effective_data_rate = 200; /* 10ns */
 				caslat = caslat - 2;
+			} else if (spd.clk_cycle2 == 0x75) {
+				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
 			}
 		}
 	} else if (max_data_rate >= 256) { /* it is DDR 266 */
 		if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDRC clk at 280~350 */
+			/* DDR controller clk at 280~350 */
 			printf("DDR: DDR controller freq is more than "
 				"max data rate of the module\n");
 			return 0;
 		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDRC clk at 230~280 */
+			/* DDR controller clk at 230~280 */
 			effective_data_rate = 266; /* 7.5ns */
 			caslat = caslat;
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDRC clk at 90~230 */
+			/* DDR controller clk at 90~230 */
+			effective_data_rate = 200; /* 10ns */
 			if (spd.clk_cycle2 == 0xa0) {
-				effective_data_rate = 200; /* 10ns */
 				caslat = caslat - 1;
 			}
 		}
 	} else if (max_data_rate >= 190) { /* it is DDR 200 */
 		if (ddrc_clk <= 350 && ddrc_clk > 230) {
-			/* DDRC clk at 230~350 */
+			/* DDR controller clk at 230~350 */
 			printf("DDR: DDR controller freq is more than "
 				"max data rate of the module\n");
 			return 0;
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDRC clk at 90~230 */
+			/* DDR controller clk at 90~230 */
 			effective_data_rate = 200; /* 10ns */
 			caslat = caslat;
 		}
 	}
 
-#ifdef CONFIG_MPC834X
-/* Errata DDR6
-   This errata affects all MPC8349E, MPC8343E and MPC8347E processors.
-*/
-	if ((tmp1 >= 280) && (tmp1 < 350)) /* CSB=333 */
-	{
-		if (spd.mid[0] == 0x2c) {
-			/* Micron memory running at 333 MHz */
-			/* Chances are, U-Boot will crash before we get here,
-			   but just in case, display a message and return error. */
-			printf("Micron DDR not supported at 333MHz CSB\n");
-			return 0;
-		} else if (spd.mid[0] == 0xad) {
-			printf("Hynix DDR does not require Errata DDR6\n");
-		} else {
-			/* enable 2 cycle Earlier for CL=2.5 or 3 */
-			ddr->debug_reg = 0x202c0000;
-			printf("Errata DDR6 (debug_reg=0x%x)\n", ddr->debug_reg);
-		}
-		caslat_83xx = caslat;
-	}
-
-	if ((tmp1 >= 230) && (tmp1 < 280)) {  /* CSB=266 */
-		if (spd.mid[0] != 0x2c) /* non-Micron */
-			caslat_83xx = caslat - 1;
+	debug("DDR:Effective data rate is: %dMhz\n", effective_data_rate);
+	debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
 
+	/*
+	 * Errata DDR6 work around: input enable 2 cycles earlier.
+	 * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
+	 */
+	if (caslat == 2) {
+		ddr->debug_reg = 0x201c0000; /* CL=2 */
+	} else if (caslat == 3) {
+		ddr->debug_reg = 0x202c0000; /* CL=2.5 */
+	} else if (caslat == 4) {
+		ddr->debug_reg = 0x202c0000; /* CL=3.0 */
 	}
+	__asm__ __volatile__ ("sync");
 
-	if ((tmp1 >= 90) && (tmp1 < 230)) {  /* CSB=200 */
-		caslat = 3;
-		caslat_83xx = 2;
-	}
-#endif
+	debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
 
 	/*
 	 * note: caslat must also be programmed into ddr->sdram_mode
@@ -353,11 +370,7 @@ long int spd_sdram()
 	    (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
 	     ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
 	     ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
-#ifdef CONFIG_MPC834x
-	     ((caslat_83xx & 0x07) << 16 ) |
-#else
 	     ((caslat_ctrl & 0x07) << 16 ) |
-#endif
 	     (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) |
 	     ( 0x300 ) |
 	     ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
@@ -370,13 +383,10 @@ long int spd_sdram()
 	ddr->sdram_cfg = 0x42000000;
 
 	/* Check DIMM data bus width */
-	if (spd.dataw_lsb == 0x20)
-	{
+	if (spd.dataw_lsb == 0x20) {
 		burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
 		printf("\n   DDR DIMM: data bus width is 32 bit");
-	}
-	else
-	{
+	} else {
 		burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
 		printf("\n   DDR DIMM: data bus width is 64 bit");
 	}
@@ -384,68 +394,67 @@ long int spd_sdram()
 	/* Is this an ECC DDR chip? */
 	if (spd.config == 0x02) {
 		printf(" with ECC\n");
-	}
-	else
+	} else {
 		printf(" without ECC\n");
+	}
 
 	/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
 	   Burst type is sequential
 	 */
-	switch(caslat) {
-	case 1:
-		ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
-		break;
-	case 2:
-		ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
-		break;
-	case 3:
-		ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
-		break;
-	case 4:
-		ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
-		break;
-	default:
-		printf("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 "
-					"is supported.\n");
-		return 0;
+	switch (caslat) {
+		case 1:
+			ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
+			break;
+		case 2:
+			ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
+			break;
+		case 3:
+			ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
+			break;
+		case 4:
+			ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
+			break;
+		default:
+			printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
+			return 0;
 	}
 	debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
 
-	switch(spd.refresh) {
-	case 0x00:
-	case 0x80:
-		tmp = picos_to_clk(15625000);
-		break;
-	case 0x01:
-	case 0x81:
-		tmp = picos_to_clk(3900000);
-		break;
-	case 0x02:
-	case 0x82:
-		tmp = picos_to_clk(7800000);
-		break;
-	case 0x03:
-	case 0x83:
-		tmp = picos_to_clk(31300000);
-		break;
-	case 0x04:
-	case 0x84:
-		tmp = picos_to_clk(62500000);
-		break;
-	case 0x05:
-	case 0x85:
-		tmp = picos_to_clk(125000000);
-		break;
-	default:
-		tmp = 0x512;
-		break;
+	switch (spd.refresh) {
+		case 0x00:
+		case 0x80:
+			refresh_clk = picos_to_clk(15625000);
+			break;
+		case 0x01:
+		case 0x81:
+			refresh_clk = picos_to_clk(3900000);
+			break;
+		case 0x02:
+		case 0x82:
+			refresh_clk = picos_to_clk(7800000);
+			break;
+		case 0x03:
+		case 0x83:
+			refresh_clk = picos_to_clk(31300000);
+			break;
+		case 0x04:
+		case 0x84:
+			refresh_clk = picos_to_clk(62500000);
+			break;
+		case 0x05:
+		case 0x85:
+			refresh_clk = picos_to_clk(125000000);
+			break;
+		default:
+			refresh_clk = 0x512;
+			break;
 	}
 
 	/*
 	 * Set BSTOPRE to 0x100 for page mode
 	 * If auto-charge is used, set BSTOPRE = 0
 	 */
-	ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100;
+	ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
 	debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
 
 	/* SS_EN = 0, source synchronous disable
@@ -459,8 +468,8 @@ long int spd_sdram()
 	udelay(600);
 
 	/*
-	 * Figure out the settings for the sdram_cfg register.  Build up
-	 * the entire register in 'tmp' before writing since the write into
+	 * Figure out the settings for the sdram_cfg register. Build up
+	 * the value in 'sdram_cfg' before writing since the write into
 	 * the register will actually enable the memory controller, and all
 	 * settings must be done before enabling.
 	 *
@@ -493,13 +502,13 @@ long int spd_sdram()
 		/* set single bit error threshold to maximum value,
 		 * reset counter to zero */
 		ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
-			(0 << ECC_ERROR_MAN_SBEC_SHIFT);
+				(0 << ECC_ERROR_MAN_SBEC_SHIFT);
 	}
 
 	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
 	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
 #endif
-	printf("   DDRC ECC mode: %s", ddrc_ecc_enable ? "ON":"OFF");
+	printf("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
 
 #if defined(CONFIG_DDR_2T_TIMING)
 	/*
@@ -517,7 +526,6 @@ long int spd_sdram()
 }
 #endif /* CONFIG_SPD_EEPROM */
 
-
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 /*
  * Use timebase counter, get_timer() is not availabe
@@ -602,26 +610,16 @@ void ddr_enable_ecc(unsigned int dram_size)
 		}
 	}
 
-	/* 8K */
-	dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
-	/* 16K */
-	dma_xfer((uint *)0x4000, 0x4000, (uint *)0);
-	/* 32K */
-	dma_xfer((uint *)0x8000, 0x8000, (uint *)0);
-	/* 64K */
-	dma_xfer((uint *)0x10000, 0x10000, (uint *)0);
-	/* 128k */
-	dma_xfer((uint *)0x20000, 0x20000, (uint *)0);
-	/* 256k */
-	dma_xfer((uint *)0x40000, 0x40000, (uint *)0);
-	/* 512k */
-	dma_xfer((uint *)0x80000, 0x80000, (uint *)0);
-	/* 1M */
-	dma_xfer((uint *)0x100000, 0x100000, (uint *)0);
-	/* 2M */
-	dma_xfer((uint *)0x200000, 0x200000, (uint *)0);
-	/* 4M */
-	dma_xfer((uint *)0x400000, 0x400000, (uint *)0);
+	dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */
+	dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */
+	dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */
+	dma_xfer((uint *)0x10000, 0x10000, (uint *)0); /* 64K */
+	dma_xfer((uint *)0x20000, 0x20000, (uint *)0); /* 128K */
+	dma_xfer((uint *)0x40000, 0x40000, (uint *)0); /* 256K */
+	dma_xfer((uint *)0x80000, 0x80000, (uint *)0); /* 512K */
+	dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */
+	dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */
+	dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */
 
 	for (i = 1; i < dram_size / 0x800000; i++) {
 		dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 412713f..31fcadd 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -104,79 +104,52 @@ int get_clocks (void)
 	u32 lcrr;
 
 	u32 csb_clk;
+#if defined(CONFIG_MPC8349)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
-	u32 core_clk;
 	u32 usbmph_clk;
 	u32 usbdr_clk;
-	u32 i2c_clk;
+#endif
+	u32 core_clk;
+	u32 i2c1_clk;
+	u32 i2c2_clk;
 	u32 enc_clk;
 	u32 lbiu_clk;
 	u32 lclk_clk;
 	u32 ddr_clk;
+#if defined (CONFIG_MPC8360)
+	u32 qepmf;
+	u32 qepdf;
+	u32 ddr_sec_clk;
+	u32 qe_clk;
+	u32 brg_clk;
+#endif
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
-#ifndef CFG_HRCW_HIGH
-# error "CFG_HRCW_HIGH must be defined in board config file"
-#endif /* CFG_HCWD_HIGH */
-
-#if (CFG_HRCW_HIGH & HRCWH_PCI_HOST)
-
-# ifndef CONFIG_83XX_CLKIN
-#  error "In PCI Host Mode, CONFIG_83XX_CLKIN must be defined in board config file"
-# endif /* CONFIG_83XX_CLKIN */
-# ifdef CONFIG_83XX_PCICLK
-#  warning "In PCI Host Mode, CONFIG_83XX_PCICLK in board config file is igonred"
-# endif /* CONFIG_83XX_PCICLK */
-
-	/* PCI Host Mode */
-	if (!(im->reset.rcwh & RCWH_PCIHOST)) {
-		/* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH
-		 * the im->reset.rcwhr PCI Host Mode is disabled
-		 * FIXME: findout if there is a way to issue some warning */
-		return -2;
-	}
-	if (im->clk.spmr & SPMR_CKID) {
-		/* PCI Clock is half CONFIG_83XX_CLKIN */
-		pci_sync_in = CONFIG_83XX_CLKIN / 2;
-	}
-	else {
-		pci_sync_in = CONFIG_83XX_CLKIN;
-	}
-
-#else /* (CFG_HRCW_HIGH & HRCWH_PCI_HOST) */
-
-# ifdef CONFIG_83XX_CLKIN
-#  warning "In PCI Agent Mode, CONFIG_83XX_CLKIN in board config file is igonred"
-# endif /* CONFIG_83XX_CLKIN */
-# ifndef CONFIG_83XX_PCICLK
-#  error "In PCI Agent Mode, CONFIG_83XX_PCICLK must be defined in board config file"
-# endif /* CONFIG_83XX_PCICLK */
+	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
 
-	/* PCI Agent Mode */
-	if (im->reset.rcwh & RCWH_PCIHOST) {
-		/* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH
-		 * the im->reset.rcwhr PCI Host Mode is enabled */
-		return -3;
+	if (im->reset.rcwh & HRCWH_PCI_HOST) {
+#if defined(CONFIG_83XX_CLKIN)
+		pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
+#else
+		pci_sync_in = 0xDEADBEEF;
+#endif
+	} else {
+#if defined(CONFIG_83XX_PCICLK)
+		pci_sync_in = CONFIG_83XX_PCICLK;
+#else
+		pci_sync_in = 0xDEADBEEF;
+#endif
 	}
-	pci_sync_in = CONFIG_83XX_PCICLK;
-
-#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */
 
-	/* we have up to date pci_sync_in */
 	spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
-	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
-
-	if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) {
-		csb_clk	= (pci_sync_in * spmf * (1 + clkin_div)) / 2;
-	}
-	else {
-		csb_clk = pci_sync_in * spmf * (1 + clkin_div);
-	}
+	csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
 
 	sccr = im->clk.sccr;
+
+#if defined(CONFIG_MPC8349)
 	switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
 	case 0:
 		tsec1_clk = 0;
@@ -212,25 +185,8 @@ int get_clocks (void)
 		/* unkown SCCR_TSEC2CM value */
 		return -5;
 	}
-	i2c_clk = tsec2_clk;
 
-	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
-	case 0:
-		enc_clk = 0;
-		break;
-	case 1:
-		enc_clk = csb_clk;
-		break;
-	case 2:
-		enc_clk = csb_clk / 2;
-		break;
-	case 3:
-		enc_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_ENCCM value */
-		return -6;
-	}
+	i2c1_clk = tsec2_clk;
 
 	switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
 	case 0:
@@ -274,8 +230,34 @@ int get_clocks (void)
 		/* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
 		return -9;
 	}
+#endif
+#if defined (CONFIG_MPC8360)
+	i2c1_clk = csb_clk;
+#endif
+	i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
 
+	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+	case 0:
+		enc_clk = 0;
+		break;
+	case 1:
+		enc_clk = csb_clk;
+		break;
+	case 2:
+		enc_clk = csb_clk / 2;
+		break;
+	case 3:
+		enc_clk = csb_clk / 3;
+		break;
+	default:
+		/* unkown SCCR_ENCCM value */
+		return -6;
+	}
+#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
 	lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+#else
+#error Unknown MPC83xx chip
+#endif
 	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
 	switch (lcrr) {
 	case 2:
@@ -287,10 +269,16 @@ int get_clocks (void)
 		/* unknown lcrr */
 		return -10;
 	}
-
+#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
 	ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
-
 	corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
+#if defined (CONFIG_MPC8360)
+	ddr_sec_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+#endif
+#else
+#error Unknown MPC83xx chip
+#endif
+
 	corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
 	if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
 		/* corecnf_tab_index is too high, possibly worng value */
@@ -319,22 +307,36 @@ int get_clocks (void)
 		return -12;
 	}
 
-	gd->csb_clk    = csb_clk   ;
-	gd->tsec1_clk  = tsec1_clk ;
-	gd->tsec2_clk  = tsec2_clk ;
-	gd->core_clk   = core_clk  ;
-	gd->usbmph_clk = usbmph_clk;
-	gd->usbdr_clk  = usbdr_clk ;
-	gd->i2c_clk    = i2c_clk   ;
-	gd->enc_clk    = enc_clk   ;
-	gd->lbiu_clk   = lbiu_clk  ;
-	gd->lclk_clk   = lclk_clk  ;
-	gd->ddr_clk    = ddr_clk   ;
-	gd->pci_clk    = pci_sync_in;
-
-	gd->cpu_clk = gd->core_clk;
-	gd->bus_clk = gd->lbiu_clk;
+#if defined (CONFIG_MPC8360)
+	qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT;
+	qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT;
+	qe_clk = (pci_sync_in * qepmf)/(1+qepdf);
+	brg_clk = qe_clk / 2;
+#endif
+
+	gd->csb_clk     = csb_clk;
+#if defined(CONFIG_MPC8349)
+	gd->tsec1_clk   = tsec1_clk;
+	gd->tsec2_clk   = tsec2_clk;
+	gd->usbmph_clk  = usbmph_clk;
+	gd->usbdr_clk   = usbdr_clk;
+#endif
+	gd->core_clk    = core_clk;
+	gd->i2c1_clk    = i2c1_clk;
+	gd->i2c2_clk    = i2c2_clk;
+	gd->enc_clk     = enc_clk;
+	gd->lbiu_clk    = lbiu_clk;
+	gd->lclk_clk    = lclk_clk;
+	gd->ddr_clk     = ddr_clk;
+#if defined (CONFIG_MPC8360)
+	gd->ddr_sec_clk = ddr_sec_clk;
+	gd->qe_clk      = qe_clk;
+	gd->brg_clk     = brg_clk;
+#endif
+	gd->cpu_clk     = gd->core_clk;
+	gd->bus_clk     = gd->csb_clk;
 	return 0;
+
 }
 
 ulong get_ddr_clk(ulong dummy)
@@ -357,14 +359,23 @@ int print_clock_conf (void)
 	printf("Clock configuration:\n");
 	printf("  Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
 	printf("  Core:                %4d MHz\n",gd->core_clk/1000000);
-	debug("  Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
+#if defined (CONFIG_MPC8360)
+	printf("  QE:                  %4d MHz\n",gd->qe_clk/1000000);
+#endif
+	printf("  Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
 	printf("  Local Bus:           %4d MHz\n",gd->lclk_clk/1000000);
-	debug("  DDR:                 %4d MHz\n",gd->ddr_clk/1000000);
-	debug("  I2C:                 %4d MHz\n",gd->i2c_clk/1000000);
-	debug("  TSEC1:               %4d MHz\n",gd->tsec1_clk/1000000);
-	debug("  TSEC2:               %4d MHz\n",gd->tsec2_clk/1000000);
-	debug("  USB MPH:             %4d MHz\n",gd->usbmph_clk/1000000);
-	debug("  USB DR:              %4d MHz\n",gd->usbdr_clk/1000000);
-
+	printf("  DDR:                 %4d MHz\n",gd->ddr_clk/1000000);
+#if defined (CONFIG_MPC8360)
+	printf("  DDR Secondary:       %4d MHz\n",gd->ddr_sec_clk/1000000);
+#endif
+	printf("  SEC:                 %4d MHz\n",gd->enc_clk/1000000);
+	printf("  I2C1:                %4d MHz\n",gd->i2c1_clk/1000000);
+	printf("  I2C2:                %4d MHz\n",gd->i2c2_clk/1000000);
+#if defined(CONFIG_MPC8349)
+	printf("  TSEC1:               %4d MHz\n",gd->tsec1_clk/1000000);
+	printf("  TSEC2:               %4d MHz\n",gd->tsec2_clk/1000000);
+	printf("  USB MPH:             %4d MHz\n",gd->usbmph_clk/1000000);
+	printf("  USB DR:              %4d MHz\n",gd->usbdr_clk/1000000);
+#endif
 	return 0;
 }
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index 908007c..79dcae4 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -12,6 +12,8 @@
 #define PVR_83xx 0x80830000
 #define PVR_8349_REV10 (PVR_83xx | 0x0010)
 #define PVR_8349_REV11 (PVR_83xx | 0x0011)
+#define PVR_8360_REV10 (PVR_83xx | 0x0020)
+#define PVR_8360_REV11 (PVR_83xx | 0x0020)
 
 /*
  * Hardware Implementation-Dependent Register 0 (HID0)
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index b73af96..418315b 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -52,17 +52,27 @@ typedef	struct	global_data {
 #if defined(CONFIG_MPC83XX)
 	/* There are other clocks in the MPC83XX */
 	u32 csb_clk;
+#if defined (CONFIG_MPC8349)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
-	u32 core_clk;
 	u32 usbmph_clk;
 	u32 usbdr_clk;
-	u32 i2c_clk;
+#endif /* CONFIG_MPC8349 */
+	u32 core_clk;
+	u32 i2c1_clk;
+	u32 i2c2_clk;
 	u32 enc_clk;
 	u32 lbiu_clk;
 	u32 lclk_clk;
 	u32 ddr_clk;
 	u32 pci_clk;
+#if defined(CONFIG_QE)
+	u32 qe_clk;
+	u32 brg_clk;
+#endif /* CONFIG_QE */
+#if defined (CONFIG_MPC8360)
+	u32  ddr_sec_clk;
+#endif /* CONFIG_MPC8360 */
 #endif
 #if defined(CONFIG_MPC5xxx)
 	unsigned long	ipb_clk;
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
new file mode 100644
index 0000000..0ae6061
--- /dev/null
+++ b/include/configs/MPC8360EMDS.h
@@ -0,0 +1,585 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1 /* E300 family */
+#define CONFIG_QE		1 /* Has QE */
+#define CONFIG_MPC83XX		1 /* MPC83XX family */
+#define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
+#define CONFIG_MPC8360EMDS	1 /* MPC8360EMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK	66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN	66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CE_PLL_VCO_DIV_4 |\
+	HRCWL_CE_PLL_DIV_1X1 |\
+	HRCWL_CE_TO_PLL_1X6 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_AGENT |\
+	HRCWH_PCI1_ARBITER_DISABLE |\
+	HRCWH_PCICKDRV_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT)
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCICKDRV_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT)
+#endif
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH		0x00000000
+#define CFG_SICRL		0x40000000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMRBAR		0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+
+#undef	CONFIG_DDR_ECC		/* only for ECC DDR module */
+#define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM	/* Use SPD EEPROM for DDR setup */
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS	0x52 /* DDR SODIMM */
+#else
+/*
+ * Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE		256 /* MB */
+#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+#define CFG_DDR_TIMING_1	0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
+#define CFG_DDR_TIMING_2	0x00000800 /* may need tuning */
+#define CFG_DDR_CONTROL 	0x42008000 /* Self refresh,2T timing */
+#define CFG_DDR_MODE		0x20000162 /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL	0x045b0100 /* page mode */
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00000000 /* memtest region */
+#define CFG_MEMTEST_END		0x00100000
+
+/*
+ * The reserved memory
+ */
+
+#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR		0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE		16 /* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | /* Flash Base address */ \
+			(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+			BR_V)	/* valid */
+#define CFG_OR0_PRELIM		0xfe006ff7 /* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
+#define CFG_MAX_FLASH_SECT	128 /* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR		0xF8000000
+#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LB_SDRAM		/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM	0xf0001861 /*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *		   XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM	0xfc006901
+
+#define CFG_LBC_LSRT	0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000 /* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON	0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM	0xf8008000 /* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM	0x8000000f /* windows size 64KB */
+
+/*
+ * CS4 on Local Bus, to PIB
+ */
+#define CFG_BR4_PRELIM	0xf8008801 /* CS4 base address at 0xf8008000 */
+#define CFG_OR4_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * CS5 on Local Bus, to PIB
+ */
+#define CFG_BR5_PRELIM	0xf8010801 /* CS5 base address at 0xf8010000 */
+#define CFG_OR5_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED	0x3F	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE	0x7F
+#define CFG_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET	0x3000
+#define CFG_I2C2_OFFSET	0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE	0x90000000
+#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_PHYS		0xE0300000
+#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS	0x00000000
+#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
+
+#endif	/* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * Environment
+ */
+
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+                               	| CFG_CMD_PCI \
+                              	| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#else
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PCI \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C)
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C  )
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000 /* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2		HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L	(CFG_IMMRBAR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U	(CFG_IMMRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/* Local bus SDRAM: cacheable */
+#define CFG_IBAT4L	(CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U	(CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#else
+#define CFG_IBAT6L	(0)
+#define CFG_IBAT6U	(0)
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_ETHADDR	00:04:9f:ef:01:01
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	00:04:9f:ef:01:02
+#endif
+
+#define CONFIG_BAUDRATE	115200
+
+#define CONFIG_LOADADDR	200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define	CONFIG_EXTRA_ENV_SETTINGS		                        \
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=400000\0"			                        \
+   "ramdiskfile=ramfs.83xx\0"						\
+
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+   "nfsroot=$serverip:$rootpath "                                       \
+   "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "    \
+   "console=$consoledev,$baudrate $othbootargs;"                        \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "                                  \
+   "console=$consoledev,$baudrate $othbootargs;"                        \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index d5b7bca..03dd0ca 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -8,16 +8,6 @@
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 /*
@@ -89,8 +79,30 @@
 /*
  * The device ID and revision numbers
  */
-#define SPR_8349E_REV10 0x80300100
-#define SPR_8349E_REV11 0x80300101
+#define SPR_8349E_REV10		0x80300100
+#define SPR_8349_REV10		0x80310100
+#define SPR_8347E_REV10_TBGA	0x80320100
+#define SPR_8347_REV10_TBGA	0x80330100
+#define SPR_8347E_REV10_PBGA	0x80340100
+#define SPR_8347_REV10_PBGA	0x80350100
+#define SPR_8343E_REV10		0x80360100
+#define SPR_8343_REV10		0x80370100
+
+#define SPR_8349E_REV11		0x80300101
+#define SPR_8349_REV11		0x80310101
+#define SPR_8347E_REV11_TBGA	0x80320101
+#define SPR_8347_REV11_TBGA	0x80330101
+#define SPR_8347E_REV11_PBGA	0x80340101
+#define SPR_8347_REV11_PBGA	0x80350101
+#define SPR_8343E_REV11		0x80360101
+#define SPR_8343_REV11		0x80370101
+
+#define SPR_8360E_REV10		0x80480010
+#define SPR_8360_REV10		0x80490010
+#define SPR_8360E_REV11		0x80480011
+#define SPR_8360_REV11		0x80490011
+#define SPR_8360E_REV12		0x80480012
+#define SPR_8360_REV12		0x80490012
 
 /*
  * Base Registers & Option Registers
@@ -122,9 +134,17 @@
 #define BR_MS_UPMA	0x00000080  /* UPMA */
 #define BR_MS_UPMB	0x000000A0  /* UPMB */
 #define BR_MS_UPMC	0x000000C0  /* UPMC */
+#if defined (CONFIG_MPC8360)
+#define BR_ATOM		0x0000000C
+#define BR_ATOM_SHIFT		2
+#endif
 #define BR_V		0x00000001
 #define BR_V_SHIFT		 0
+#if defined (CONFIG_MPC8349)
 #define BR_RES		~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+#elif defined (CONFIG_MPC8360)
+#define BR_RES		~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V)
+#endif
 
 #define OR0 0x5004
 #define OR1 0x500C
@@ -207,14 +227,21 @@
 #define HRCWH_PCI_AGENT              0x00000000
 #define HRCWH_PCI_HOST               0x80000000
 
+#if defined (CONFIG_MPC8349)
 #define HRCWH_32_BIT_PCI             0x00000000
 #define HRCWH_64_BIT_PCI             0x40000000
+#endif
 
 #define HRCWH_PCI1_ARBITER_DISABLE   0x00000000
 #define HRCWH_PCI1_ARBITER_ENABLE    0x20000000
 
+#if defined (CONFIG_MPC8349)
 #define HRCWH_PCI2_ARBITER_DISABLE   0x00000000
 #define HRCWH_PCI2_ARBITER_ENABLE    0x10000000
+#elif defined (CONFIG_MPC8360)
+#define HRCWH_PCICKDRV_DISABLE       0x00000000
+#define HRCWH_PCICKDRV_ENABLE        0x10000000
+#endif
 
 #define HRCWH_CORE_DISABLE           0x08000000
 #define HRCWH_CORE_ENABLE            0x00000000
@@ -231,11 +258,14 @@
 
 #define HRCWH_ROM_LOC_DDR_SDRAM      0x00000000
 #define HRCWH_ROM_LOC_PCI1           0x00100000
+#if defined (CONFIG_MPC8349)
 #define HRCWH_ROM_LOC_PCI2           0x00200000
+#endif
 #define HRCWH_ROM_LOC_LOCAL_8BIT     0x00500000
 #define HRCWH_ROM_LOC_LOCAL_16BIT    0x00600000
 #define HRCWH_ROM_LOC_LOCAL_32BIT    0x00700000
 
+#if defined (CONFIG_MPC8349)
 #define HRCWH_TSEC1M_IN_RGMII        0x00000000
 #define HRCWH_TSEC1M_IN_RTBI         0x00004000
 #define HRCWH_TSEC1M_IN_GMII         0x00008000
@@ -245,6 +275,12 @@
 #define HRCWH_TSEC2M_IN_RTBI         0x00001000
 #define HRCWH_TSEC2M_IN_GMII         0x00002000
 #define HRCWH_TSEC2M_IN_TBI          0x00003000
+#endif
+
+#if defined (CONFIG_MPC8360)
+#define HRCWH_SECONDARY_DDR_DISABLE  0x00000000
+#define HRCWH_SECONDARY_DDR_ENABLE   0x00000010
+#endif
 
 #define HRCWH_BIG_ENDIAN             0x00000000
 #define HRCWH_LITTLE_ENDIAN          0x00000008
@@ -293,6 +329,47 @@
 #define HRCWL_CORE_TO_CSB_2_5X1      0x00050000
 #define HRCWL_CORE_TO_CSB_3X1        0x00060000
 
+#if defined (CONFIG_MPC8360)
+#define HRCWL_CE_PLL_VCO_DIV_4       0x00000000
+#define HRCWL_CE_PLL_VCO_DIV_8       0x00000040
+#define HRCWL_CE_PLL_VCO_DIV_2       0x00000080
+
+#define HRCWL_CE_PLL_DIV_1X1         0x00000000
+#define HRCWL_CE_PLL_DIV_2X1         0x00000020
+
+#define HRCWL_CE_TO_PLL_1X16_        0x00000000
+#define HRCWL_CE_TO_PLL_1X2          0x00000002
+#define HRCWL_CE_TO_PLL_1X3          0x00000003
+#define HRCWL_CE_TO_PLL_1X4          0x00000004
+#define HRCWL_CE_TO_PLL_1X5          0x00000005
+#define HRCWL_CE_TO_PLL_1X6          0x00000006
+#define HRCWL_CE_TO_PLL_1X7          0x00000007
+#define HRCWL_CE_TO_PLL_1X8          0x00000008
+#define HRCWL_CE_TO_PLL_1X9          0x00000009
+#define HRCWL_CE_TO_PLL_1X10         0x0000000A
+#define HRCWL_CE_TO_PLL_1X11         0x0000000B
+#define HRCWL_CE_TO_PLL_1X12         0x0000000C
+#define HRCWL_CE_TO_PLL_1X13         0x0000000D
+#define HRCWL_CE_TO_PLL_1X14         0x0000000E
+#define HRCWL_CE_TO_PLL_1X15         0x0000000F
+#define HRCWL_CE_TO_PLL_1X16         0x00000010
+#define HRCWL_CE_TO_PLL_1X17         0x00000011
+#define HRCWL_CE_TO_PLL_1X18         0x00000012
+#define HRCWL_CE_TO_PLL_1X19         0x00000013
+#define HRCWL_CE_TO_PLL_1X20         0x00000014
+#define HRCWL_CE_TO_PLL_1X21         0x00000015
+#define HRCWL_CE_TO_PLL_1X22         0x00000016
+#define HRCWL_CE_TO_PLL_1X23         0x00000017
+#define HRCWL_CE_TO_PLL_1X24         0x00000018
+#define HRCWL_CE_TO_PLL_1X25         0x00000019
+#define HRCWL_CE_TO_PLL_1X26         0x0000001A
+#define HRCWL_CE_TO_PLL_1X27         0x0000001B
+#define HRCWL_CE_TO_PLL_1X28         0x0000001C
+#define HRCWL_CE_TO_PLL_1X29         0x0000001D
+#define HRCWL_CE_TO_PLL_1X30         0x0000001E
+#define HRCWL_CE_TO_PLL_1X31         0x0000001F
+#endif
+
 /*
  * LCRR - Clock Ratio Register (10.3.1.16)
  */
@@ -346,6 +423,7 @@
 			| SCCR_TSEC2CM_3	\
 			| SCCR_ENCCM_3		\
 			| SCCR_USBCM_3		)
+
 #define SCCR_DEFAULT	0xFFFFFFFF
 
 #endif	/* __MPC83XX_H__ */
-- 
2.7.4