From 5ec32f84111a500c142961c82dd415c22e64e2be Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 21 Nov 2016 15:49:48 +0100 Subject: [PATCH] mmc: core: Check SWITCH_ERROR bit from each CMD13 response when polling According to the JEDEC specification, the SWITCH_ERROR bit in the device status from a R1 response, is an error bit which may be cleared as soon as the response that reports the error is sent. When polling with CMD13 to find out when the card stops signaling busy after a CMD6 has been sent, we currently parse only the last CMD13 response for the SWITCH_ERROR bit. Consequentially we could loose important information about the card. In worst case if the card stops signaling busy within the allowed timeout, we could end up believing that the CMD6 command completed successfully, when in fact it didn't. To improve the behaviour, let's parse each CMD13 response to see if the SWITCH_ERROR bit is set in the device status. In such case, we abort the polling loop and report the error. Signed-off-by: Ulf Hansson Tested-by: Linus Walleij Acked-by: Adrian Hunter --- drivers/mmc/core/mmc_ops.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 214e734..fba5d29 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -496,12 +496,16 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, busy = host->ops->card_busy(host); } else { err = mmc_send_status(card, &status); - if (retry_crc_err && err == -EILSEQ) + if (retry_crc_err && err == -EILSEQ) { busy = true; - else if (err) + } else if (err) { return err; - else + } else { + err = mmc_switch_status_error(host, status); + if (err) + return err; busy = R1_CURRENT_STATE(status) == R1_STATE_PRG; + } } /* Timeout if the device still remains busy. */ @@ -515,7 +519,7 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, if (host->ops->card_busy && send_status) return mmc_switch_status(card); - return mmc_switch_status_error(host, status); + return 0; } /** -- 2.7.4