From 5e03f02cb58d1cee5d98f323da9abe2e7073b2b4 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Mon, 9 Jul 2018 14:37:51 +0530 Subject: [PATCH] dt-bindings: mipi-dsi: Add dual-channel DSI related info Add binding info for peripherals that support dual-channel DSI. Add corresponding optional bindings for DSI host controllers that may be configured in this mode. Add an example of an I2C controlled device operating in dual-channel DSI mode. Reviewed-by: Rob Herring Reviewed-by: Philippe Cornu Reviewed-by: Sean Paul Reviewed-by: Heiko Stuebner Signed-off-by: Archit Taneja Link: https://patchwork.freedesktop.org/patch/msgid/20180709090751.10221-3-architt@codeaurora.org --- .../devicetree/bindings/display/mipi-dsi-bus.txt | 80 ++++++++++++++++++++++ 1 file changed, 80 insertions(+) diff --git a/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt index b7c5bf4..a336599 100644 --- a/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt +++ b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt @@ -29,6 +29,13 @@ Required properties: - #size-cells: Should be 0. There are cases where it makes sense to use a different value here. See below. +Optional properties: +- clock-master: boolean. Should be enabled if the host is being used in + conjunction with another DSI host to drive the same peripheral. Hardware + supporting such a configuration generally requires the data on both the busses + to be driven by the same clock. Only the DSI host instance controlling this + clock should contain this property. + DSI peripheral ============== @@ -62,6 +69,16 @@ primary control bus, but are also connected to a DSI bus (mostly for the data path). Connections between such peripherals and a DSI host can be represented using the graph bindings [1], [2]. +Peripherals that support dual channel DSI +----------------------------------------- + +Peripherals with higher bandwidth requirements can be connected to 2 DSI +busses. Each DSI bus/channel drives some portion of the pixel data (generally +left/right half of each line of the display, or even/odd lines of the display). +The graph bindings should be used to represent the multiple DSI busses that are +connected to this peripheral. Each DSI host's output endpoint can be linked to +an input endpoint of the DSI peripheral. + [1] Documentation/devicetree/bindings/graph.txt [2] Documentation/devicetree/bindings/media/video-interfaces.txt @@ -71,6 +88,8 @@ Examples with different virtual channel configurations. - (4) is an example of a peripheral on a I2C control bus connected to a DSI host using of-graph bindings. +- (5) is an example of 2 DSI hosts driving a dual-channel DSI peripheral, + which uses I2C as its primary control bus. 1) dsi-host { @@ -153,3 +172,64 @@ Examples }; }; }; + +5) + i2c-host { + dsi-bridge@35 { + compatible = "..."; + reg = <0x35>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_in: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; + + dsi0-host { + ... + + /* + * this DSI instance drives the clock for both the host + * controllers + */ + clock-master; + + ports { + ... + + port { + dsi0_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi1-host { + ... + + ports { + ... + + port { + dsi1_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; -- 2.7.4