From 5d331905273dbdbf31bbbcd7d399404c1c3c9396 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 6 Mar 2019 10:23:09 +0100 Subject: [PATCH] arm: exynos: odroid: Fix build if BOARD_TYPES are not set CONFIG_BOARD_TYPES is necessary for Odroid X/X2/U3 boards to detect proper revision. However building should succeed even without it. While moving code around, document also the reference clock selection. This fixes the build error without CONFIG_BOARD_TYPES: board/samsung/odroid/odroid.c: In function 'board_usb_init': board/samsung/odroid/odroid.c:473:8: error: 'gd_t' {aka 'volatile struct global_data'} has no member named 'board_type' if (gd->board_type == ODROID_TYPE_U3) ^~ Signed-off-by: Krzysztof Kozlowski Signed-off-by: Minkyu Kang --- board/samsung/odroid/odroid.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index 4be8cc9..3e594fd 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -470,18 +470,33 @@ struct dwc2_plat_otg_data s5pc210_otg_data = { #if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB) +static void set_usb3503_ref_clk(void) +{ +#ifdef CONFIG_BOARD_TYPES + /* + * gpx3-0 chooses primary (low) or secondary (high) reference clock + * frequencies table. The choice of clock is done through hard-wired + * REF_SEL pins. + * The Odroid Us have reference clock at 24 MHz (00 entry from secondary + * table) and Odroid Xs have it at 26 MHz (01 entry from primary table). + */ + if (gd->board_type == ODROID_TYPE_U3) + gpio_direction_output(EXYNOS4X12_GPIO_X30, 0); + else + gpio_direction_output(EXYNOS4X12_GPIO_X30, 1); +#else + /* Choose Odroid Xs frequency without board types */ + gpio_direction_output(EXYNOS4X12_GPIO_X30, 1); +#endif /* CONFIG_BOARD_TYPES */ +} + int board_usb_init(int index, enum usb_init_type init) { #ifdef CONFIG_CMD_USB struct udevice *dev; int ret; - /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/ - /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */ - if (gd->board_type == ODROID_TYPE_U3) - gpio_direction_output(EXYNOS4X12_GPIO_X30, 0); - else - gpio_direction_output(EXYNOS4X12_GPIO_X30, 1); + set_usb3503_ref_clk(); /* Disconnect, Reset, Connect */ gpio_direction_output(EXYNOS4X12_GPIO_X34, 0); -- 2.7.4