From 5ce0ba88650f2606244a761d92e2b725f4ab3583 Mon Sep 17 00:00:00 2001 From: Hiep Cao Minh Date: Tue, 3 Sep 2013 13:10:26 +0900 Subject: [PATCH] spi: rcar: add Renesas QSPI support on RSPI The R8A7790 has QSPI module which is very similar to RSPI. This patch adds into RSPI module together to supports QSPI module. Signed-off-by: Hiep Cao Minh Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 2 +- drivers/spi/spi-rspi.c | 183 ++++++++++++++++++++++++++++++++++++----------- include/linux/spi/rspi.h | 2 + 3 files changed, 145 insertions(+), 42 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index b9c53cc..738facf 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -369,7 +369,7 @@ config SPI_PXA2XX_PCI config SPI_RSPI tristate "Renesas RSPI controller" - depends on SUPERH && SH_DMAE_BASE + depends on (SUPERH || ARCH_SHMOBILE) && SH_DMAE_BASE help SPI driver for Renesas RSPI blocks. diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 8719206..4c8dbac 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -59,6 +59,14 @@ #define RSPI_SPCMD6 0x1c #define RSPI_SPCMD7 0x1e +/*qspi only */ +#define QSPI_SPBFCR 0x18 +#define QSPI_SPBDCR 0x1a +#define QSPI_SPBMUL0 0x1c +#define QSPI_SPBMUL1 0x20 +#define QSPI_SPBMUL2 0x24 +#define QSPI_SPBMUL3 0x28 + /* SPCR */ #define SPCR_SPRIE 0x80 #define SPCR_SPE 0x40 @@ -126,6 +134,8 @@ #define SPCMD_LSBF 0x1000 #define SPCMD_SPB_MASK 0x0f00 #define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK) +#define SPCMD_SPB_8BIT 0x0000 /* qspi only */ +#define SPCMD_SPB_16BIT 0x0100 #define SPCMD_SPB_20BIT 0x0000 #define SPCMD_SPB_24BIT 0x0100 #define SPCMD_SPB_32BIT 0x0200 @@ -135,6 +145,10 @@ #define SPCMD_CPOL 0x0002 #define SPCMD_CPHA 0x0001 +/* SPBFCR */ +#define SPBFCR_TXRST 0x80 /* qspi only */ +#define SPBFCR_RXRST 0x40 /* qspi only */ + struct rspi_data { void __iomem *addr; u32 max_speed_hz; @@ -145,6 +159,7 @@ struct rspi_data { spinlock_t lock; struct clk *clk; unsigned char spsr; + const struct spi_ops *ops; /* for dmaengine */ struct dma_chan *chan_tx; @@ -165,6 +180,11 @@ static void rspi_write16(struct rspi_data *rspi, u16 data, u16 offset) iowrite16(data, rspi->addr + offset); } +static void rspi_write32(struct rspi_data *rspi, u32 data, u16 offset) +{ + iowrite32(data, rspi->addr + offset); +} + static u8 rspi_read8(struct rspi_data *rspi, u16 offset) { return ioread8(rspi->addr + offset); @@ -175,17 +195,98 @@ static u16 rspi_read16(struct rspi_data *rspi, u16 offset) return ioread16(rspi->addr + offset); } -static unsigned char rspi_calc_spbr(struct rspi_data *rspi) +/* optional functions */ +struct spi_ops { + int (*set_config_register)(struct rspi_data *rspi, int access_size); +}; + +/* + * functions for RSPI + */ +static int rspi_set_config_register(struct rspi_data *rspi, int access_size) { - int tmp; - unsigned char spbr; + int spbr; + + /* Sets output mode(CMOS) and MOSI signal(from previous transfer) */ + rspi_write8(rspi, 0x00, RSPI_SPPCR); - tmp = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1; - spbr = clamp(tmp, 0, 255); + /* Sets transfer bit rate */ + spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1; + rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); + + /* Sets number of frames to be used: 1 frame */ + rspi_write8(rspi, 0x00, RSPI_SPDCR); - return spbr; + /* Sets RSPCK, SSL, next-access delay value */ + rspi_write8(rspi, 0x00, RSPI_SPCKD); + rspi_write8(rspi, 0x00, RSPI_SSLND); + rspi_write8(rspi, 0x00, RSPI_SPND); + + /* Sets parity, interrupt mask */ + rspi_write8(rspi, 0x00, RSPI_SPCR2); + + /* Sets SPCMD */ + rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP, + RSPI_SPCMD0); + + /* Sets RSPI mode */ + rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); + + return 0; } +/* + * functions for QSPI + */ +static int qspi_set_config_register(struct rspi_data *rspi, int access_size) +{ + u16 spcmd; + int spbr; + + /* Sets output mode(CMOS) and MOSI signal(from previous transfer) */ + rspi_write8(rspi, 0x00, RSPI_SPPCR); + + /* Sets transfer bit rate */ + spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz); + rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); + + /* Sets number of frames to be used: 1 frame */ + rspi_write8(rspi, 0x00, RSPI_SPDCR); + + /* Sets RSPCK, SSL, next-access delay value */ + rspi_write8(rspi, 0x00, RSPI_SPCKD); + rspi_write8(rspi, 0x00, RSPI_SSLND); + rspi_write8(rspi, 0x00, RSPI_SPND); + + /* Data Length Setting */ + if (access_size == 8) + spcmd = SPCMD_SPB_8BIT; + else if (access_size == 16) + spcmd = SPCMD_SPB_16BIT; + else if (access_size == 32) + spcmd = SPCMD_SPB_32BIT; + + spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SSLKP | SPCMD_SPNDEN; + + /* Resets transfer data length */ + rspi_write32(rspi, 0, QSPI_SPBMUL0); + + /* Resets transmit and receive buffer */ + rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR); + /* Sets buffer to allow normal operation */ + rspi_write8(rspi, 0x00, QSPI_SPBFCR); + + /* Sets SPCMD */ + rspi_write16(rspi, spcmd, RSPI_SPCMD0); + + /* Enables SPI function in a master mode */ + rspi_write8(rspi, SPCR_SPE | SPCR_MSTR, RSPI_SPCR); + + return 0; +} + +#define set_config_register(spi, n) spi->ops->set_config_register(spi, n) + static void rspi_enable_irq(struct rspi_data *rspi, u8 enable) { rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR); @@ -220,35 +321,6 @@ static void rspi_negate_ssl(struct rspi_data *rspi) rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR); } -static int rspi_set_config_register(struct rspi_data *rspi, int access_size) -{ - /* Sets output mode(CMOS) and MOSI signal(from previous transfer) */ - rspi_write8(rspi, 0x00, RSPI_SPPCR); - - /* Sets transfer bit rate */ - rspi_write8(rspi, rspi_calc_spbr(rspi), RSPI_SPBR); - - /* Sets number of frames to be used: 1 frame */ - rspi_write8(rspi, 0x00, RSPI_SPDCR); - - /* Sets RSPCK, SSL, next-access delay value */ - rspi_write8(rspi, 0x00, RSPI_SPCKD); - rspi_write8(rspi, 0x00, RSPI_SSLND); - rspi_write8(rspi, 0x00, RSPI_SPND); - - /* Sets parity, interrupt mask */ - rspi_write8(rspi, 0x00, RSPI_SPCR2); - - /* Sets SPCMD */ - rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP, - RSPI_SPCMD0); - - /* Sets RSPI mode */ - rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); - - return 0; -} - static int rspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg, struct spi_transfer *t) { @@ -616,7 +688,7 @@ static int rspi_setup(struct spi_device *spi) spi->bits_per_word = 8; rspi->max_speed_hz = spi->max_speed_hz; - rspi_set_config_register(rspi, 8); + set_config_register(rspi, 8); return 0; } @@ -745,7 +817,16 @@ static int rspi_probe(struct platform_device *pdev) struct rspi_data *rspi; int ret, irq; char clk_name[16]; - + struct rspi_plat_data *rspi_pd = pdev->dev.platform_data; + const struct spi_ops *ops; + const struct platform_device_id *id_entry = pdev->id_entry; + + ops = (struct spi_ops *)id_entry->driver_data; + /* ops parameter check */ + if (!ops->set_config_register) { + dev_err(&pdev->dev, "there is no set_config_register\n"); + return -ENODEV; + } /* get base addr */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(res == NULL)) { @@ -767,7 +848,7 @@ static int rspi_probe(struct platform_device *pdev) rspi = spi_master_get_devdata(master); platform_set_drvdata(pdev, rspi); - + rspi->ops = ops; rspi->master = master; rspi->addr = ioremap(res->start, resource_size(res)); if (rspi->addr == NULL) { @@ -776,7 +857,7 @@ static int rspi_probe(struct platform_device *pdev) goto error1; } - snprintf(clk_name, sizeof(clk_name), "rspi%d", pdev->id); + snprintf(clk_name, sizeof(clk_name), "%s%d", id_entry->name, pdev->id); rspi->clk = clk_get(&pdev->dev, clk_name); if (IS_ERR(rspi->clk)) { dev_err(&pdev->dev, "cannot get clock\n"); @@ -790,7 +871,10 @@ static int rspi_probe(struct platform_device *pdev) INIT_WORK(&rspi->ws, rspi_work); init_waitqueue_head(&rspi->wait); - master->num_chipselect = 2; + master->num_chipselect = rspi_pd->num_chipselect; + if (!master->num_chipselect) + master->num_chipselect = 2; /* default */ + master->bus_num = pdev->id; master->setup = rspi_setup; master->transfer = rspi_transfer; @@ -832,11 +916,28 @@ error1: return ret; } +static struct spi_ops rspi_ops = { + .set_config_register = rspi_set_config_register, +}; + +static struct spi_ops qspi_ops = { + .set_config_register = qspi_set_config_register, +}; + +static struct platform_device_id spi_driver_ids[] = { + { "rspi", (kernel_ulong_t)&rspi_ops }, + { "qspi", (kernel_ulong_t)&qspi_ops }, + {}, +}; + +MODULE_DEVICE_TABLE(platform, spi_driver_ids); + static struct platform_driver rspi_driver = { .probe = rspi_probe, .remove = rspi_remove, + .id_table = spi_driver_ids, .driver = { - .name = "rspi", + .name = "renesas_spi", .owner = THIS_MODULE, }, }; diff --git a/include/linux/spi/rspi.h b/include/linux/spi/rspi.h index 900f0e3..a25bd6f 100644 --- a/include/linux/spi/rspi.h +++ b/include/linux/spi/rspi.h @@ -26,6 +26,8 @@ struct rspi_plat_data { unsigned int dma_rx_id; unsigned dma_width_16bit:1; /* DMAC read/write width = 16-bit */ + + u16 num_chipselect; }; #endif -- 2.7.4