From 5b489012e9a4965c5dbefe88aa59676152b607f0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 7 Apr 2021 12:39:11 +0200 Subject: [PATCH] USB: serial: pl2303: fix TIOCGSERIAL implementation TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The baud_base parameter could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/pl2303.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 9c0bb59..1bb870c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -1055,8 +1055,9 @@ static int pl2303_get_serial(struct tty_struct *tty, ss->type = PORT_16654; ss->line = port->minor; - ss->port = port->port_number; - ss->baud_base = 460800; + ss->close_delay = 50; + ss->closing_wait = 3000; + return 0; } -- 2.7.4