From 5ada28bf76752e33dce3d807bf0dfbe6d1b943ad Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 11 Nov 2010 14:05:21 -0800 Subject: [PATCH] led-class: always implement blinking Currently, blinking LEDs can be awkward because it is not guaranteed that all LEDs implement blinking. The trigger that wants it to blink then needs to implement its own timer solution. Rather than require that, add led_blink_set() API that triggers can use. This function will attempt to use hw blinking, but if that fails implements a timer for it. To stop blinking again, brightness_set() also needs to be wrapped into API that will stop the software blink. As a result of this, the timer trigger becomes a very trivial one, and hopefully we can finally see triggers using blinking as well because it's always easy to use. Signed-off-by: Johannes Berg Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/leds-class.txt | 21 +++--- drivers/leds/Kconfig | 2 +- drivers/leds/led-class.c | 105 +++++++++++++++++++++++++++++- drivers/leds/led-triggers.c | 2 +- drivers/leds/ledtrig-timer.c | 124 +++--------------------------------- drivers/net/wireless/rt2x00/Kconfig | 3 - include/linux/leds.h | 47 ++++++++++++-- 7 files changed, 171 insertions(+), 133 deletions(-) diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt index 8fd5ca2..58b266b 100644 --- a/Documentation/leds-class.txt +++ b/Documentation/leds-class.txt @@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs Some LEDs can be programmed to blink without any CPU interaction. To support this feature, a LED driver can optionally implement the -blink_set() function (see ). If implemented, triggers can -attempt to use it before falling back to software timers. The blink_set() -function should return 0 if the blink setting is supported, or -EINVAL -otherwise, which means that LED blinking will be handled by software. - -The blink_set() function should choose a user friendly blinking -value if it is called with *delay_on==0 && *delay_off==0 parameters. In -this case the driver should give back the chosen value through delay_on -and delay_off parameters to the leds subsystem. +blink_set() function (see ). To set an LED to blinking, +however, it is better to use use the API function led_blink_set(), +as it will check and implement software fallback if necessary. + +To turn off blinking again, use the API function led_brightness_set() +as that will not just set the LED brightness but also stop any software +timers that may have been required for blinking. + +The blink_set() function should choose a user friendly blinking value +if it is called with *delay_on==0 && *delay_off==0 parameters. In this +case the driver should give back the chosen value through delay_on and +delay_off parameters to the leds subsystem. Setting the brightness to zero with brightness_set() callback function should completely turn off the LED and cancel the previously programmed diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index cc2a88d..56b4b7a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -10,7 +10,7 @@ menuconfig NEW_LEDS if NEW_LEDS config LEDS_CLASS - tristate "LED Class Support" + bool "LED Class Support" help This option enables the led sysfs class in /sys/class/leds. You'll need this to do anything useful with LEDs. If unsure, say N. diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 2606600..211e21f 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -81,6 +81,79 @@ static struct device_attribute led_class_attrs[] = { __ATTR_NULL, }; +static void led_timer_function(unsigned long data) +{ + struct led_classdev *led_cdev = (void *)data; + unsigned long brightness; + unsigned long delay; + + if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) { + led_set_brightness(led_cdev, LED_OFF); + return; + } + + brightness = led_get_brightness(led_cdev); + if (!brightness) { + /* Time to switch the LED on. */ + brightness = led_cdev->blink_brightness; + delay = led_cdev->blink_delay_on; + } else { + /* Store the current brightness value to be able + * to restore it when the delay_off period is over. + */ + led_cdev->blink_brightness = brightness; + brightness = LED_OFF; + delay = led_cdev->blink_delay_off; + } + + led_set_brightness(led_cdev, brightness); + + mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay)); +} + +static void led_stop_software_blink(struct led_classdev *led_cdev) +{ + /* deactivate previous settings */ + del_timer_sync(&led_cdev->blink_timer); + led_cdev->blink_delay_on = 0; + led_cdev->blink_delay_off = 0; +} + +static void led_set_software_blink(struct led_classdev *led_cdev, + unsigned long delay_on, + unsigned long delay_off) +{ + int current_brightness; + + current_brightness = led_get_brightness(led_cdev); + if (current_brightness) + led_cdev->blink_brightness = current_brightness; + if (!led_cdev->blink_brightness) + led_cdev->blink_brightness = led_cdev->max_brightness; + + if (delay_on == led_cdev->blink_delay_on && + delay_off == led_cdev->blink_delay_off) + return; + + led_stop_software_blink(led_cdev); + + led_cdev->blink_delay_on = delay_on; + led_cdev->blink_delay_off = delay_off; + + /* never on - don't blink */ + if (!delay_on) + return; + + /* never off - just set to brightness */ + if (!delay_off) { + led_set_brightness(led_cdev, led_cdev->blink_brightness); + return; + } + + mod_timer(&led_cdev->blink_timer, jiffies + 1); +} + + /** * led_classdev_suspend - suspend an led_classdev. * @led_cdev: the led_classdev to suspend. @@ -148,6 +221,10 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) led_update_brightness(led_cdev); + init_timer(&led_cdev->blink_timer); + led_cdev->blink_timer.function = led_timer_function; + led_cdev->blink_timer.data = (unsigned long)led_cdev; + #ifdef CONFIG_LEDS_TRIGGERS led_trigger_set_default(led_cdev); #endif @@ -157,7 +234,6 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) return 0; } - EXPORT_SYMBOL_GPL(led_classdev_register); /** @@ -175,6 +251,9 @@ void led_classdev_unregister(struct led_classdev *led_cdev) up_write(&led_cdev->trigger_lock); #endif + /* Stop blinking */ + led_brightness_set(led_cdev, LED_OFF); + device_unregister(led_cdev->dev); down_write(&leds_list_lock); @@ -183,6 +262,30 @@ void led_classdev_unregister(struct led_classdev *led_cdev) } EXPORT_SYMBOL_GPL(led_classdev_unregister); +void led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + if (led_cdev->blink_set && + led_cdev->blink_set(led_cdev, delay_on, delay_off)) + return; + + /* blink with 1 Hz as default if nothing specified */ + if (!*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + led_set_software_blink(led_cdev, *delay_on, *delay_off); +} +EXPORT_SYMBOL(led_blink_set); + +void led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + led_stop_software_blink(led_cdev); + led_cdev->brightness_set(led_cdev, brightness); +} +EXPORT_SYMBOL(led_brightness_set); + static int __init leds_init(void) { leds_class = class_create(THIS_MODULE, "leds"); diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c index f1c00db..c41eb618 100644 --- a/drivers/leds/led-triggers.c +++ b/drivers/leds/led-triggers.c @@ -113,7 +113,7 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger) if (led_cdev->trigger->deactivate) led_cdev->trigger->deactivate(led_cdev); led_cdev->trigger = NULL; - led_set_brightness(led_cdev, LED_OFF); + led_brightness_set(led_cdev, LED_OFF); } if (trigger) { write_lock_irqsave(&trigger->leddev_list_lock, flags); diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c index 82b77bd..b09bcbe 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/ledtrig-timer.c @@ -12,73 +12,25 @@ */ #include -#include #include #include -#include -#include #include -#include -#include #include #include -#include #include "leds.h" -struct timer_trig_data { - int brightness_on; /* LED brightness during "on" period. - * (LED_OFF < brightness_on <= LED_FULL) - */ - unsigned long delay_on; /* milliseconds on */ - unsigned long delay_off; /* milliseconds off */ - struct timer_list timer; -}; - -static void led_timer_function(unsigned long data) -{ - struct led_classdev *led_cdev = (struct led_classdev *) data; - struct timer_trig_data *timer_data = led_cdev->trigger_data; - unsigned long brightness; - unsigned long delay; - - if (!timer_data->delay_on || !timer_data->delay_off) { - led_set_brightness(led_cdev, LED_OFF); - return; - } - - brightness = led_get_brightness(led_cdev); - if (!brightness) { - /* Time to switch the LED on. */ - brightness = timer_data->brightness_on; - delay = timer_data->delay_on; - } else { - /* Store the current brightness value to be able - * to restore it when the delay_off period is over. - */ - timer_data->brightness_on = brightness; - brightness = LED_OFF; - delay = timer_data->delay_off; - } - - led_set_brightness(led_cdev, brightness); - - mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay)); -} - static ssize_t led_delay_on_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; - return sprintf(buf, "%lu\n", timer_data->delay_on); + return sprintf(buf, "%lu\n", led_cdev->blink_delay_on); } static ssize_t led_delay_on_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); @@ -88,21 +40,7 @@ static ssize_t led_delay_on_store(struct device *dev, count++; if (count == size) { - if (timer_data->delay_on != state) { - /* the new value differs from the previous */ - timer_data->delay_on = state; - - /* deactivate previous settings */ - del_timer_sync(&timer_data->timer); - - /* try to activate hardware acceleration, if any */ - if (!led_cdev->blink_set || - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off)) { - /* no hardware acceleration, blink via timer */ - mod_timer(&timer_data->timer, jiffies + 1); - } - } + led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off); ret = count; } @@ -113,16 +51,14 @@ static ssize_t led_delay_off_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; - return sprintf(buf, "%lu\n", timer_data->delay_off); + return sprintf(buf, "%lu\n", led_cdev->blink_delay_off); } static ssize_t led_delay_off_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); @@ -132,21 +68,7 @@ static ssize_t led_delay_off_store(struct device *dev, count++; if (count == size) { - if (timer_data->delay_off != state) { - /* the new value differs from the previous */ - timer_data->delay_off = state; - - /* deactivate previous settings */ - del_timer_sync(&timer_data->timer); - - /* try to activate hardware acceleration, if any */ - if (!led_cdev->blink_set || - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off)) { - /* no hardware acceleration, blink via timer */ - mod_timer(&timer_data->timer, jiffies + 1); - } - } + led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state); ret = count; } @@ -158,60 +80,34 @@ static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store); static void timer_trig_activate(struct led_classdev *led_cdev) { - struct timer_trig_data *timer_data; int rc; - timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL); - if (!timer_data) - return; - - timer_data->brightness_on = led_get_brightness(led_cdev); - if (timer_data->brightness_on == LED_OFF) - timer_data->brightness_on = led_cdev->max_brightness; - led_cdev->trigger_data = timer_data; - - init_timer(&timer_data->timer); - timer_data->timer.function = led_timer_function; - timer_data->timer.data = (unsigned long) led_cdev; + led_cdev->trigger_data = NULL; rc = device_create_file(led_cdev->dev, &dev_attr_delay_on); if (rc) - goto err_out; + return; rc = device_create_file(led_cdev->dev, &dev_attr_delay_off); if (rc) goto err_out_delayon; - /* If there is hardware support for blinking, start one - * user friendly blink rate chosen by the driver. - */ - if (led_cdev->blink_set) - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off); + led_cdev->trigger_data = (void *)1; return; err_out_delayon: device_remove_file(led_cdev->dev, &dev_attr_delay_on); -err_out: - led_cdev->trigger_data = NULL; - kfree(timer_data); } static void timer_trig_deactivate(struct led_classdev *led_cdev) { - struct timer_trig_data *timer_data = led_cdev->trigger_data; - unsigned long on = 0, off = 0; - - if (timer_data) { + if (led_cdev->trigger_data) { device_remove_file(led_cdev->dev, &dev_attr_delay_on); device_remove_file(led_cdev->dev, &dev_attr_delay_off); - del_timer_sync(&timer_data->timer); - kfree(timer_data); } - /* If there is hardware support for blinking, stop it */ - if (led_cdev->blink_set) - led_cdev->blink_set(led_cdev, &on, &off); + /* Stop blinking */ + led_brightness_set(led_cdev, LED_OFF); } static struct led_trigger timer_led_trigger = { diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index eea1ef2..4396d4b 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -221,9 +221,6 @@ config RT2X00_LIB_LEDS boolean default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) -comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00" - depends on RT2X00_LIB=y && LEDS_CLASS=m - config RT2X00_LIB_DEBUGFS bool "Ralink debugfs support" depends on RT2X00_LIB && MAC80211_DEBUGFS diff --git a/include/linux/leds.h b/include/linux/leds.h index ba6986a..0f19df9 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -15,6 +15,7 @@ #include #include #include +#include struct device; /* @@ -45,10 +46,14 @@ struct led_classdev { /* Get LED brightness level */ enum led_brightness (*brightness_get)(struct led_classdev *led_cdev); - /* Activate hardware accelerated blink, delays are in - * miliseconds and if none is provided then a sensible default - * should be chosen. The call can adjust the timings if it can't - * match the values specified exactly. */ + /* + * Activate hardware accelerated blink, delays are in milliseconds + * and if both are zero then a sensible default should be chosen. + * The call should adjust the timings in that case and if it can't + * match the values specified exactly. + * Deactivate blinking again when the brightness is set to a fixed + * value via the brightness_set() callback. + */ int (*blink_set)(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off); @@ -57,6 +62,10 @@ struct led_classdev { struct list_head node; /* LED Device list */ const char *default_trigger; /* Trigger to use */ + unsigned long blink_delay_on, blink_delay_off; + struct timer_list blink_timer; + int blink_brightness; + #ifdef CONFIG_LEDS_TRIGGERS /* Protects the trigger data below */ struct rw_semaphore trigger_lock; @@ -73,6 +82,36 @@ extern void led_classdev_unregister(struct led_classdev *led_cdev); extern void led_classdev_suspend(struct led_classdev *led_cdev); extern void led_classdev_resume(struct led_classdev *led_cdev); +/** + * led_blink_set - set blinking with software fallback + * @led_cdev: the LED to start blinking + * @delay_on: the time it should be on (in ms) + * @delay_off: the time it should ble off (in ms) + * + * This function makes the LED blink, attempting to use the + * hardware acceleration if possible, but falling back to + * software blinking if there is no hardware blinking or if + * the LED refuses the passed values. + * + * Note that if software blinking is active, simply calling + * led_cdev->brightness_set() will not stop the blinking, + * use led_classdev_brightness_set() instead. + */ +extern void led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off); +/** + * led_brightness_set - set LED brightness + * @led_cdev: the LED to set + * @brightness: the brightness to set it to + * + * Set an LED's brightness, and, if necessary, cancel the + * software blink timer that implements blinking when the + * hardware doesn't. + */ +extern void led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness); + /* * LED Triggers */ -- 2.7.4