From 581b19e5592c77cf041906d431f7734c3e7b6578 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: [PATCH] ARM: sun7i: olinuxino micro: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 364 ++++++++++++------------ 1 file changed, 181 insertions(+), 183 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 5c548cf..f6f0631 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -68,216 +68,214 @@ spi1 = &spi2; }; - soc@01c00000 { - spi1: spi@01c06000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; + green { + label = "a20-olinuxino-micro:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - cd-inverted; - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - spi2: spi@01c17000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - ehci1: usb@01c1c000 { - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - ohci1: usb@01c1c400 { - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - pinctrl@01c20800 { - mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = ; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Search"; - linux,code = ; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = ; - channel = <0>; - voltage = <987387>; - }; - - button@1184 { - label = "Esc"; - linux,code = ; - channel = <0>; - voltage = <1184678>; - }; - - button@1398 { - label = "Enter"; - linux,code = ; - channel = <0>; - voltage = <1398804>; - }; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - uart6: serial@01c29800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; - status = "okay"; - }; + button@191 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <191274>; + }; - uart7: serial@01c29c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; - }; + button@392 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <392644>; + }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + button@601 { + label = "Menu"; + linux,code = ; + channel = <0>; + voltage = <601151>; + }; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + button@795 { + label = "Search"; + linux,code = ; + channel = <0>; + voltage = <795090>; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + button@987 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <987387>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@1184 { + label = "Esc"; + linux,code = ; + channel = <0>; + voltage = <1184678>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@1398 { + label = "Enter"; + linux,code = ; + channel = <0>; + voltage = <1398804>; + }; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + cd-inverted; + status = "okay"; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; +&ohci0 { + status = "okay"; +}; - green { - label = "a20-olinuxino-micro:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +&ohci1 { + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; +&pio { + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +®_ahci_5v { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; -- 2.7.4