From 57f9156bc620ac561ed46b2316de328e6b280023 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 28 Jan 2016 02:46:22 +0000 Subject: [PATCH] ARM: dts: r8a7793: enable to use thermal-zone This patch enables to use thermal-zone on r8a7793. This thermal sensor can measure temperature from -40000 to 125000, but over 117000 can be critical on this chip. Thus, default critical temperature is now set as 115000 (this driver is using 5000 steps) (Current critical temperature is using it as 90000, but there is no big reason about it) And it doesn't check thermal zone periodically (same as current behavior). You can exchange it by modifying polling-delay[-passive] property. You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS, but you need to take care to use it, since it will call orderly_poweroff() it it reaches to the value. echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7793.dtsi | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 45dba1c..9837f90 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -54,6 +54,25 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -170,12 +189,15 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7793", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { -- 2.7.4