From 57bf433893370c069a0c34842f35a3bb8aa130fc Mon Sep 17 00:00:00 2001 From: Hai Li Date: Thu, 15 Sep 2016 14:44:22 +0530 Subject: [PATCH] drm/msm/dsi: Pass down use case to PHY For some new types of DSI PHY, more settings depend on use cases controlled by DSI manager. This change allows DSI manager to setup PHY with a use case. Signed-off-by: Hai Li Signed-off-by: Archit Taneja Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi.h | 8 +++++++ drivers/gpu/drm/msm/dsi/dsi_manager.c | 43 ++++++++++++----------------------- drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 29 ++++++++++++++++++++++- drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 + 4 files changed, 51 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h index f5e4ccf..d516fe2 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.h +++ b/drivers/gpu/drm/msm/dsi/dsi.h @@ -37,6 +37,12 @@ enum msm_dsi_phy_type { MSM_DSI_PHY_MAX }; +enum msm_dsi_phy_usecase { + MSM_DSI_PHY_STANDALONE, + MSM_DSI_PHY_MASTER, + MSM_DSI_PHY_SLAVE, +}; + #define DSI_DEV_REGULATOR_MAX 8 #define DSI_BUS_CLK_MAX 4 @@ -180,6 +186,8 @@ void msm_dsi_phy_disable(struct msm_dsi_phy *phy); void msm_dsi_phy_get_shared_timings(struct msm_dsi_phy *phy, struct msm_dsi_phy_shared_timings *shared_timing); struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy); +void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy, + enum msm_dsi_phy_usecase uc); #endif /* __DSI_CONNECTOR_H__ */ diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index 423afa6..c040830 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -72,11 +72,12 @@ static int dsi_mgr_parse_dual_dsi(struct device_node *np, int id) return 0; } -static int dsi_mgr_host_register(int id) +static int dsi_mgr_setup_components(int id) { struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id); struct msm_dsi *clk_master_dsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER); + struct msm_dsi *clk_slave_dsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE); struct msm_dsi_pll *src_pll; int ret; @@ -85,15 +86,16 @@ static int dsi_mgr_host_register(int id) if (ret) return ret; + msm_dsi_phy_set_usecase(msm_dsi->phy, MSM_DSI_PHY_STANDALONE); src_pll = msm_dsi_phy_get_pll(msm_dsi->phy); ret = msm_dsi_host_set_src_pll(msm_dsi->host, src_pll); } else if (!other_dsi) { ret = 0; } else { - struct msm_dsi *mdsi = IS_MASTER_DSI_LINK(id) ? - msm_dsi : other_dsi; - struct msm_dsi *sdsi = IS_MASTER_DSI_LINK(id) ? - other_dsi : msm_dsi; + struct msm_dsi *master_link_dsi = IS_MASTER_DSI_LINK(id) ? + msm_dsi : other_dsi; + struct msm_dsi *slave_link_dsi = IS_MASTER_DSI_LINK(id) ? + other_dsi : msm_dsi; /* Register slave host first, so that slave DSI device * has a chance to probe, and do not block the master * DSI device's probe. @@ -101,14 +103,18 @@ static int dsi_mgr_host_register(int id) * because only master DSI device adds the panel to global * panel list. The panel's device is the master DSI device. */ - ret = msm_dsi_host_register(sdsi->host, false); + ret = msm_dsi_host_register(slave_link_dsi->host, false); if (ret) return ret; - ret = msm_dsi_host_register(mdsi->host, true); + ret = msm_dsi_host_register(master_link_dsi->host, true); if (ret) return ret; /* PLL0 is to drive both 2 DSI link clocks in Dual DSI mode. */ + msm_dsi_phy_set_usecase(clk_master_dsi->phy, + MSM_DSI_PHY_MASTER); + msm_dsi_phy_set_usecase(clk_slave_dsi->phy, + MSM_DSI_PHY_SLAVE); src_pll = msm_dsi_phy_get_pll(clk_master_dsi->phy); ret = msm_dsi_host_set_src_pll(msm_dsi->host, src_pll); if (ret) @@ -665,28 +671,12 @@ int msm_dsi_manager_phy_enable(int id, struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); struct msm_dsi_phy *phy = msm_dsi->phy; int src_pll_id = IS_DUAL_DSI() ? DSI_CLOCK_MASTER : id; - struct msm_dsi_pll *pll = msm_dsi_phy_get_pll(msm_dsi->phy); int ret; ret = msm_dsi_phy_enable(phy, src_pll_id, bit_rate, esc_rate); if (ret) return ret; - /* - * Reset DSI PHY silently changes its PLL registers to reset status, - * which will confuse clock driver and result in wrong output rate of - * link clocks. Restore PLL status if its PLL is being used as clock - * source. - */ - if (!IS_DUAL_DSI() || (id == DSI_CLOCK_MASTER)) { - ret = msm_dsi_pll_restore_state(pll); - if (ret) { - pr_err("%s: failed to restore pll state\n", __func__); - msm_dsi_phy_disable(phy); - return ret; - } - } - msm_dsi->phy_enabled = true; msm_dsi_phy_get_shared_timings(phy, shared_timings); @@ -699,11 +689,6 @@ void msm_dsi_manager_phy_disable(int id) struct msm_dsi *mdsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER); struct msm_dsi *sdsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE); struct msm_dsi_phy *phy = msm_dsi->phy; - struct msm_dsi_pll *pll = msm_dsi_phy_get_pll(msm_dsi->phy); - - /* Save PLL status if it is a clock source */ - if (!IS_DUAL_DSI() || (id == DSI_CLOCK_MASTER)) - msm_dsi_pll_save_state(pll); /* disable DSI phy * In dual-dsi configuration, the phy should be disabled for the @@ -834,7 +819,7 @@ int msm_dsi_manager_register(struct msm_dsi *msm_dsi) goto fail; } - ret = dsi_mgr_host_register(id); + ret = dsi_mgr_setup_components(id); if (ret) { pr_err("%s: failed to register mipi dsi host for DSI %d\n", __func__, id); diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index 51f7c66..1021c1c 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -451,7 +451,24 @@ int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id, return ret; } - return 0; + /* + * Resetting DSI PHY silently changes its PLL registers to reset status, + * which will confuse clock driver and result in wrong output rate of + * link clocks. Restore PLL status if its PLL is being used as clock + * source. + */ + if (phy->usecase != MSM_DSI_PHY_SLAVE) { + ret = msm_dsi_pll_restore_state(phy->pll); + if (ret) { + pr_err("%s: failed to restore pll state\n", __func__); + if (phy->cfg->ops.disable) + phy->cfg->ops.disable(phy); + dsi_phy_regulator_disable(phy); + return ret; + } + } + + return ret; } void msm_dsi_phy_disable(struct msm_dsi_phy *phy) @@ -459,6 +476,10 @@ void msm_dsi_phy_disable(struct msm_dsi_phy *phy) if (!phy || !phy->cfg->ops.disable) return; + /* Save PLL status if it is a clock source */ + if (phy->usecase != MSM_DSI_PHY_SLAVE) + msm_dsi_pll_save_state(phy->pll); + phy->cfg->ops.disable(phy); dsi_phy_regulator_disable(phy); @@ -479,3 +500,9 @@ struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy) return phy->pll; } +void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy, + enum msm_dsi_phy_usecase uc) +{ + if (phy) + phy->usecase = uc; +} diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h index 7399934..e105742 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h @@ -78,6 +78,7 @@ struct msm_dsi_phy { struct msm_dsi_dphy_timing timing; const struct msm_dsi_phy_cfg *cfg; + enum msm_dsi_phy_usecase usecase; bool regulator_ldo_mode; struct msm_dsi_pll *pll; -- 2.7.4