From 56643d9ad2b4933d55f872f61195c1650f9958e9 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 15 Jun 2020 10:41:07 +0200 Subject: [PATCH] clk: bcm: rpi: Remove the quirks for the CPU clock The CPU clock has had so far a bunch of quirks to expose the clock tree properly, but since we reverted to exposing them through the MMIO driver, we can remove that code from the firmware driver. Acked-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/acdf820c2f78a25dd7480a0c018b8b387acd013e.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd --- drivers/clk/bcm/clk-raspberrypi.c | 164 -------------------------------------- 1 file changed, 164 deletions(-) diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index adc0bb5..5cc8295 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -56,14 +56,6 @@ static char *rpi_firmware_clk_names[] = { #define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0) #define RPI_FIRMWARE_STATE_WAIT_BIT BIT(1) -/* - * Even though the firmware interface alters 'pllb' the frequencies are - * provided as per 'pllb_arm'. We need to scale before passing them trough. - */ -#define RPI_FIRMWARE_PLLB_ARM_DIV_RATE 2 - -#define A2W_PLL_FRAC_BITS 20 - struct raspberrypi_clk { struct device *dev; struct rpi_firmware *firmware; @@ -152,13 +144,6 @@ static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw, return val; } -static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - return raspberrypi_fw_get_rate(hw, parent_rate) * - RPI_FIRMWARE_PLLB_ARM_DIV_RATE; -} - static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -177,142 +162,6 @@ static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate, return ret; } -static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE; - - return raspberrypi_fw_set_rate(hw, new_rate, parent_rate); -} - -/* - * Sadly there is no firmware rate rounding interface. We borrowed it from - * clk-bcm2835. - */ -static int raspberrypi_pll_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) -{ - u64 div, final_rate; - u32 ndiv, fdiv; - - /* We can't use req->rate directly as it would overflow */ - final_rate = clamp(req->rate, req->min_rate, req->max_rate); - - div = (u64)final_rate << A2W_PLL_FRAC_BITS; - do_div(div, req->best_parent_rate); - - ndiv = div >> A2W_PLL_FRAC_BITS; - fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1); - - final_rate = ((u64)req->best_parent_rate * - ((ndiv << A2W_PLL_FRAC_BITS) + fdiv)); - - req->rate = final_rate >> A2W_PLL_FRAC_BITS; - - return 0; -} - -static const struct clk_ops raspberrypi_firmware_pll_clk_ops = { - .is_prepared = raspberrypi_fw_is_prepared, - .recalc_rate = raspberrypi_fw_pll_get_rate, - .set_rate = raspberrypi_fw_pll_set_rate, - .determine_rate = raspberrypi_pll_determine_rate, -}; - -static struct clk_hw *raspberrypi_register_pllb(struct raspberrypi_clk *rpi) -{ - struct raspberrypi_clk_data *data; - struct clk_init_data init = {}; - u32 min_rate = 0, max_rate = 0; - int ret; - - data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL); - if (!data) - return ERR_PTR(-ENOMEM); - data->rpi = rpi; - data->id = RPI_FIRMWARE_ARM_CLK_ID; - - /* All of the PLLs derive from the external oscillator. */ - init.parent_names = (const char *[]){ "osc" }; - init.num_parents = 1; - init.name = "pllb"; - init.ops = &raspberrypi_firmware_pll_clk_ops; - init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED; - - /* Get min & max rates set by the firmware */ - ret = raspberrypi_clock_property(rpi->firmware, data, - RPI_FIRMWARE_GET_MIN_CLOCK_RATE, - &min_rate); - if (ret) { - dev_err(rpi->dev, "Failed to get %s min freq: %d\n", - init.name, ret); - return ERR_PTR(ret); - } - - ret = raspberrypi_clock_property(rpi->firmware, data, - RPI_FIRMWARE_GET_MAX_CLOCK_RATE, - &max_rate); - if (ret) { - dev_err(rpi->dev, "Failed to get %s max freq: %d\n", - init.name, ret); - return ERR_PTR(ret); - } - - if (!min_rate || !max_rate) { - dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n", - min_rate, max_rate); - return ERR_PTR(-EINVAL); - } - - dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n", - min_rate, max_rate); - - data->hw.init = &init; - - ret = devm_clk_hw_register(rpi->dev, &data->hw); - if (ret) - return ERR_PTR(ret); - - clk_hw_set_rate_range(&data->hw, - min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE, - max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE); - - return &data->hw; -} - -static struct clk_fixed_factor raspberrypi_clk_pllb_arm = { - .mult = 1, - .div = 2, - .hw.init = &(struct clk_init_data) { - .name = "pllb_arm", - .parent_names = (const char *[]){ "pllb" }, - .num_parents = 1, - .ops = &clk_fixed_factor_ops, - .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, - }, -}; - -static struct clk_hw *raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi) -{ - int ret; - - ret = devm_clk_hw_register(rpi->dev, &raspberrypi_clk_pllb_arm.hw); - if (ret) { - dev_err(rpi->dev, "Failed to initialize pllb_arm\n"); - return ERR_PTR(ret); - } - - ret = devm_clk_hw_register_clkdev(rpi->dev, - &raspberrypi_clk_pllb_arm.hw, - NULL, "cpu0"); - if (ret) { - dev_err(rpi->dev, "Failed to initialize clkdev\n"); - return ERR_PTR(ret); - } - - return &raspberrypi_clk_pllb_arm.hw; -} - static int raspberrypi_fw_dumb_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) { @@ -341,19 +190,6 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi, u32 min_rate, max_rate; int ret; - if (id == RPI_FIRMWARE_ARM_CLK_ID) { - struct clk_hw *hw; - - hw = raspberrypi_register_pllb(rpi); - if (IS_ERR(hw)) { - dev_err(rpi->dev, "Failed to initialize pllb, %ld\n", - PTR_ERR(hw)); - return hw; - } - - return raspberrypi_register_pllb_arm(rpi); - } - data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL); if (!data) return ERR_PTR(-ENOMEM); -- 2.7.4