From 5611ec2b9814bc91f7b0a8d804c1fc152e2025d9 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 24 Jul 2020 01:29:10 +0800 Subject: [PATCH] nvme-pci: prevent SK hynix PC400 from using Write Zeroes command After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes command"), SK hynix PC400 becomes very slow with the following error message: [ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0] SK Hynix PC400 has a buggy firmware that treats NLB as max value instead of a range, so the NLB passed isn't a valid value to the firmware. According to SK hynix there are three commands are affected: - Write Zeroes - Compare - Write Uncorrectable Right now only Write Zeroes is implemented, so disable it completely on SK hynix PC400. BugLink: https://bugs.launchpad.net/bugs/1872383 Cc: kyounghwan sohn Signed-off-by: Kai-Heng Feng Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index b1d18f0633c7..25a187e43dbe 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3122,6 +3122,8 @@ static const struct pci_device_id nvme_id_table[] = { { PCI_DEVICE(0x1cc1, 0x8201), /* ADATA SX8200PNP 512GB */ .driver_data = NVME_QUIRK_NO_DEEPEST_PS | NVME_QUIRK_IGNORE_DEV_SUBNQN, }, + { PCI_DEVICE(0x1c5c, 0x1504), /* SK Hynix PC400 */ + .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001), .driver_data = NVME_QUIRK_SINGLE_VECTOR }, -- 2.34.1