From 5572e10323a7d3cdccf639225553a6e2542049bd Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Dec 2006 02:38:58 -0800 Subject: [PATCH] [PATCH] Char: sx, convert to pci probing Convert old pci code to pci probing. Cc: Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/sx.c | 183 +++++++++++++++++++++++++++++++----------------------- 1 file changed, 105 insertions(+), 78 deletions(-) diff --git a/drivers/char/sx.c b/drivers/char/sx.c index cf08be7..5e01337 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -246,14 +246,6 @@ #define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000 #endif -#ifdef CONFIG_PCI -static struct pci_device_id sx_pci_tbl[] = { - { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, PCI_ANY_ID, PCI_ANY_ID }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, sx_pci_tbl); -#endif /* CONFIG_PCI */ - /* Configurable options: (Don't be too sure that it'll work if you toggle them) */ @@ -2373,7 +2365,6 @@ static void __exit sx_release_drivers(void) func_exit(); } -#ifdef CONFIG_PCI /******************************************************** * Setting bit 17 in the CNTRL register of the PLX 9050 * * chip forces a retry on writes while a read is pending.* @@ -2404,22 +2395,112 @@ static void fix_sx_pci (struct pci_dev *pdev, struct sx_board *board) } iounmap(rebase); } -#endif +static int __devinit sx_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct sx_board *board; + unsigned int i; + int retval = -EIO; + + for (i = 0; i < SX_NBOARDS; i++) + if (!(boards[i].flags & SX_BOARD_PRESENT)) + break; + + if (i == SX_NBOARDS) + goto err; + + retval = pci_enable_device(pdev); + if (retval) + goto err; + + board = &boards[i]; + + board->flags &= ~SX_BOARD_TYPE; + board->flags |= (pdev->subsystem_vendor == 0x200) ? SX_PCI_BOARD : + SX_CFPCI_BOARD; + + /* CF boards use base address 3.... */ + if (IS_CF_BOARD (board)) + board->hw_base = pci_resource_start(pdev, 3); + else + board->hw_base = pci_resource_start(pdev, 2); + board->base2 = + board->base = ioremap(board->hw_base, WINDOW_LEN (board)); + if (!board->base) { + dev_err(&pdev->dev, "ioremap failed\n"); + goto err; + } + + /* Most of the stuff on the CF board is offset by 0x18000 .... */ + if (IS_CF_BOARD (board)) + board->base += 0x18000; + + board->irq = pdev->irq; + + dev_info(&pdev->dev, "Got a specialix card: %p(%d) %x.\n", board->base, + board->irq, board->flags); + + if (!probe_sx(board)) { + retval = -EIO; + goto err_unmap; + } + + fix_sx_pci(pdev, board); + + pci_set_drvdata(pdev, board); + + return 0; +err_unmap: + iounmap(board->base2); +err: + return retval; +} + +static void __devexit sx_pci_remove(struct pci_dev *pdev) +{ + struct sx_board *board = pci_get_drvdata(pdev); + + if (board->flags & SX_BOARD_INITIALIZED) { + /* The board should stop messing with us. (actually I mean the + interrupt) */ + sx_reset(board); + if ((board->irq) && (board->flags & SX_IRQ_ALLOCATED)) + free_irq(board->irq, board); + + /* It is safe/allowed to del_timer a non-active timer */ + del_timer(&board->timer); + iounmap(board->base); + + board->flags &= ~(SX_BOARD_INITIALIZED|SX_BOARD_PRESENT); + } +} + +/* Specialix has a whole bunch of cards with 0x2000 as the device ID. They say + its because the standard requires it. So check for SUBVENDOR_ID. */ +static struct pci_device_id sx_pci_tbl[] = { + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, + .subvendor = 0x0200, .subdevice = PCI_ANY_ID }, + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, + .subvendor = 0x0300, .subdevice = PCI_ANY_ID }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, sx_pci_tbl); + +static struct pci_driver sx_pcidriver = { + .name = "sx", + .id_table = sx_pci_tbl, + .probe = sx_pci_probe, + .remove = __devexit_p(sx_pci_remove) +}; static int __init sx_init(void) { - int i; + int retval, i; int found = 0; int eisa_slot; struct sx_board *board; -#ifdef CONFIG_PCI - struct pci_dev *pdev = NULL; - unsigned int tint; - unsigned short tshort; -#endif - func_enter(); sx_dprintk (SX_DEBUG_INIT, "Initing sx module... (sx_debug=%d)\n", sx_debug); if (abs ((long) (&sx_debug) - sx_debug) < 0x10000) { @@ -2434,65 +2515,6 @@ static int __init sx_init(void) return -EIO; } -#ifdef CONFIG_PCI - while ((pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, - PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, - pdev))) { - if (pci_enable_device(pdev)) - continue; - - /* Specialix has a whole bunch of cards with - 0x2000 as the device ID. They say its because - the standard requires it. Stupid standard. */ - /* It seems that reading a word doesn't work reliably on 2.0. - Also, reading a non-aligned dword doesn't work. So we read the - whole dword at 0x2c and extract the word at 0x2e (SUBSYSTEM_ID) - ourselves */ - /* I don't know why the define doesn't work, constant 0x2c does --REW */ - pci_read_config_dword (pdev, 0x2c, &tint); - tshort = (tint >> 16) & 0xffff; - sx_dprintk (SX_DEBUG_PROBE, "Got a specialix card: %x.\n", tint); - /* sx_dprintk (SX_DEBUG_PROBE, "pdev = %d/%d (%x)\n", pdev, tint); */ - if ((tshort != 0x0200) && (tshort != 0x0300)) { - sx_dprintk (SX_DEBUG_PROBE, "But it's not an SX card (%d)...\n", - tshort); - continue; - } - board = &boards[found]; - - board->flags &= ~SX_BOARD_TYPE; - board->flags |= (tshort == 0x200)?SX_PCI_BOARD: - SX_CFPCI_BOARD; - - /* CF boards use base address 3.... */ - if (IS_CF_BOARD (board)) - board->hw_base = pci_resource_start (pdev, 3); - else - board->hw_base = pci_resource_start (pdev, 2); - board->base2 = - board->base = ioremap(board->hw_base, WINDOW_LEN (board)); - if (!board->base) { - printk(KERN_ERR "ioremap failed\n"); - /* XXX handle error */ - } - - /* Most of the stuff on the CF board is offset by - 0x18000 .... */ - if (IS_CF_BOARD (board)) board->base += 0x18000; - - board->irq = pdev->irq; - - sx_dprintk (SX_DEBUG_PROBE, "Got a specialix card: %x/%p(%d) %x.\n", - tint, boards[found].base, board->irq, board->flags); - - if (probe_sx (board)) { - found++; - fix_sx_pci (pdev, board); - } else - iounmap(board->base2); - } -#endif - for (i=0;ihw_base = sx_probe_addrs[i]; @@ -2568,14 +2590,18 @@ static int __init sx_init(void) found++; } } + + retval = pci_register_driver(&sx_pcidriver); + if (found) { printk (KERN_INFO "sx: total of %d boards detected.\n", found); - } else { + retval = 0; + } else if (retval) { misc_deregister(&sx_fw_device); } func_exit(); - return found?0:-EIO; + return retval; } @@ -2585,6 +2611,7 @@ static void __exit sx_exit (void) struct sx_board *board; func_enter(); + pci_unregister_driver(&sx_pcidriver); for (i = 0; i < SX_NBOARDS; i++) { board = &boards[i]; if (board->flags & SX_BOARD_INITIALIZED) { -- 2.7.4