From 5552d7ad596c3fea953f40fef74170ce0760c04d Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Wed, 4 Jul 2018 14:34:20 +0300 Subject: [PATCH] mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips SDHCI controller in ls1043a and ls1046a generate 40-bit wide addresses when doing DMA. Make sure that the corresponding dma mask is correctly configured. Context: when enabling smmu on these chips the following problem is encountered: the smmu input address size is 48 bits so the dma mappings for sdhci end up 48-bit wide. However, on these chips sdhci only use 40-bits of that address size when doing dma. So you end up with a 48-bit address translation in smmu but the device generates transactions with clipped 40-bit addresses, thus smmu context faults are triggered. Setting up the correct dma mask fixes this situation. Signed-off-by: Laurentiu Tudor Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-of-esdhc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index c9685c6..9cb7554 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" @@ -472,6 +473,11 @@ static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask) static int esdhc_of_enable_dma(struct sdhci_host *host) { u32 value; + struct device *dev = mmc_dev(host->mmc); + + if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") || + of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc")) + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40)); value = sdhci_readl(host, ESDHC_DMA_SYSCTL); value |= ESDHC_DMA_SNOOP; -- 2.7.4