From 554f8e84b63e90f92d59a91820c81ff0635340dd Mon Sep 17 00:00:00 2001 From: Sinthu Raja Date: Tue, 10 Jan 2023 21:17:54 +0530 Subject: [PATCH] board: ti: j721s2: Add board_init and support for selecting DT based on EEPROM Add the board_init_f API for SPL and run the platform-required SoC initialization. Add the functionality for board name-based DTB selection from FIT within SPL. This will make it easier to utilise one defconfig for both the EVM and the SK. Signed-off-by: Sinthu Raja Reviewed-by: Tom Rini --- board/ti/j721s2/evm.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c index 9b159e3..c86715f 100644 --- a/board/ti/j721s2/evm.c +++ b/board/ti/j721s2/evm.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "../common/board_detect.h" @@ -207,3 +208,66 @@ int board_late_init(void) void spl_board_init(void) { } + +/* Support for the various EVM / SK families */ +#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT) +void do_dt_magic(void) +{ + int ret, rescan, mmc_dev = -1; + static struct mmc *mmc; + + do_board_detect(); + + /* + * Board detection has been done. + * Let us see if another dtb wouldn't be a better match + * for our board + */ + if (IS_ENABLED(CONFIG_CPU_V7R)) { + ret = fdtdec_resetup(&rescan); + if (!ret && rescan) { + dm_uninit(); + dm_init_and_scan(true); + } + } + + /* + * Because of multi DTB configuration, the MMC device has + * to be re-initialized after reconfiguring FDT inorder to + * boot from MMC. Do this when boot mode is MMC and ROM has + * not loaded SYSFW. + */ + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC1: + mmc_dev = 0; + break; + case BOOT_DEVICE_MMC2: + case BOOT_DEVICE_MMC2_2: + mmc_dev = 1; + break; + } + + if (mmc_dev > 0 && !check_rom_loaded_sysfw()) { + ret = mmc_init_device(mmc_dev); + if (!ret) { + mmc = find_mmc_device(mmc_dev); + if (mmc) { + ret = mmc_init(mmc); + if (ret) + printf("mmc init failed with error: %d\n", ret); + } + } + } +} +#endif + +#ifdef CONFIG_SPL_BUILD +void board_init_f(ulong dummy) +{ + k3_spl_init(); +#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT) + do_dt_magic(); +#endif + k3_mem_init(); +} +#endif -- 2.7.4