From 540effa7f283d25bcc13c0940d808002fee340b8 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Fri, 24 Sep 2021 12:30:10 +0300 Subject: [PATCH] hwmon: (tmp421) report /PVLD condition as fault For both local and remote sensors all the supported ICs can report an "undervoltage lockout" condition which means the conversion wasn't properly performed due to insufficient power supply voltage and so the measurement results can't be trusted. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser Link: https://lore.kernel.org/r/20210924093011.26083-2-fercerpav@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp421.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 8fd8c3a..c9ef836 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -179,10 +179,10 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, return 0; case hwmon_temp_fault: /* - * The OPEN bit signals a fault. This is bit 0 of the temperature - * register (low byte). + * Any of OPEN or /PVLD bits indicate a hardware mulfunction + * and the conversion result may be incorrect */ - *val = tmp421->temp[channel] & 0x01; + *val = !!(tmp421->temp[channel] & 0x03); return 0; default: return -EOPNOTSUPP; @@ -195,9 +195,6 @@ static umode_t tmp421_is_visible(const void *data, enum hwmon_sensor_types type, { switch (attr) { case hwmon_temp_fault: - if (channel == 0) - return 0; - return 0444; case hwmon_temp_input: return 0444; default: -- 2.7.4