From 52f9028c84baea81230dc673b756552e8e90aecd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 5 Apr 2007 11:21:06 +1000 Subject: [PATCH] Initial import of modesetting for intel driver in DRM --- linux-core/Makefile.kernel | 6 +- linux-core/drmP.h | 5 + linux-core/drm_crtc.c | 540 +++++++++++++++++++++ linux-core/drm_crtc.h | 428 +++++++++++++++++ linux-core/drm_edid.c | 515 ++++++++++++++++++++ linux-core/drm_modes.c | 304 ++++++++++++ linux-core/i915_drv.c | 1 + linux-core/intel_crt.c | 226 +++++++++ linux-core/intel_display.c | 1087 ++++++++++++++++++++++++++++++++++++++++++ linux-core/intel_drv.h | 69 +++ linux-core/intel_i2c.c | 164 +++++++ linux-core/intel_lvds.c | 108 +++++ linux-core/intel_modes.c | 49 ++ linux-core/intel_sdvo.c | 999 ++++++++++++++++++++++++++++++++++++++ linux-core/intel_sdvo_regs.h | 302 ++++++++++++ shared-core/i915_dma.c | 135 ++++-- shared-core/i915_drv.h | 474 ++++++++++++++++++ 17 files changed, 5358 insertions(+), 54 deletions(-) create mode 100644 linux-core/drm_crtc.c create mode 100644 linux-core/drm_crtc.h create mode 100644 linux-core/drm_edid.c create mode 100644 linux-core/drm_modes.c create mode 100644 linux-core/intel_crt.c create mode 100644 linux-core/intel_display.c create mode 100644 linux-core/intel_drv.h create mode 100644 linux-core/intel_i2c.c create mode 100644 linux-core/intel_lvds.c create mode 100644 linux-core/intel_modes.c create mode 100644 linux-core/intel_sdvo.c create mode 100644 linux-core/intel_sdvo_regs.h diff --git a/linux-core/Makefile.kernel b/linux-core/Makefile.kernel index 6f5b021..ac403f6 100644 --- a/linux-core/Makefile.kernel +++ b/linux-core/Makefile.kernel @@ -13,13 +13,15 @@ drm-objs := drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \ drm_sysfs.o drm_pci.o drm_agpsupport.o drm_scatter.o \ drm_memory_debug.o ati_pcigart.o drm_sman.o \ drm_hashtab.o drm_mm.o drm_object.o drm_compat.o \ - drm_fence.o drm_ttm.o drm_bo.o drm_bo_move.o + drm_fence.o drm_ttm.o drm_bo.o drm_bo_move.o drm_crtc.o \ + drm_edid.o drm_modes.o tdfx-objs := tdfx_drv.o r128-objs := r128_drv.o r128_cce.o r128_state.o r128_irq.o mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o i810-objs := i810_drv.o i810_dma.o i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_fence.o \ - i915_buffer.o + i915_buffer.o intel_display.o intel_crt.o intel_lvds.o \ + intel_sdvo.o intel_modes.o intel_i2c.o nouveau-objs := nouveau_drv.o nouveau_state.o nouveau_fifo.o nouveau_mem.o \ nouveau_object.o nouveau_irq.o \ nv04_timer.o \ diff --git a/linux-core/drmP.h b/linux-core/drmP.h index 648e29b..db62ab8 100644 --- a/linux-core/drmP.h +++ b/linux-core/drmP.h @@ -164,6 +164,8 @@ #include "drm_compat.h" +#include "drm_crtc.h" + /***********************************************************************/ /** \name Macros to make printk easier */ /*@{*/ @@ -827,6 +829,9 @@ typedef struct drm_device { unsigned int drw_info_length; drm_drawable_info_t **drw_info; /*@} */ + + /* DRM mode setting */ + struct drm_crtc_config crtc_config; } drm_device_t; #if __OS_HAS_AGP diff --git a/linux-core/drm_crtc.c b/linux-core/drm_crtc.c new file mode 100644 index 0000000..a52d82b --- /dev/null +++ b/linux-core/drm_crtc.c @@ -0,0 +1,540 @@ +#include +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" + +struct drm_framebuffer *drm_framebuffer_create(drm_device_t *dev) +{ + struct drm_framebuffer *fb; + + spin_lock(&dev->crtc_config.config_lock); + /* Limit to single framebuffer for now */ + if (dev->crtc_config.num_fb > 1) { + DRM_ERROR("Attempt to add multiple framebuffers failed\n"); + return NULL; + } + spin_unlock(&dev->crtc_config.config_lock); + + fb = kzalloc(sizeof(struct drm_framebuffer), GFP_KERNEL); + if (!fb) { + + return NULL; + } + + fb->dev = dev; + spin_lock(&dev->crtc_config.config_lock); + dev->crtc_config.num_fb++; + list_add(&fb->head, &dev->crtc_config.fb_list); + spin_unlock(&dev->crtc_config.config_lock); + + return fb; +} + +void drm_framebuffer_destroy(struct drm_framebuffer *fb) +{ + drm_device_t *dev = fb->dev; + + spin_lock(&dev->crtc_config.config_lock); + list_del(&fb->head); + dev->crtc_config.num_fb--; + spin_unlock(&dev->crtc_config.config_lock); + + kfree(fb); +} + +struct drm_crtc *drm_crtc_create(drm_device_t *dev, + const struct drm_crtc_funcs *funcs) +{ + struct drm_crtc *crtc = NULL; + crtc = kmalloc(sizeof(struct drm_crtc), GFP_KERNEL); + if (!crtc) + return NULL; + + crtc->dev = dev; + crtc->funcs = funcs; + + spin_lock(&dev->crtc_config.config_lock); + + list_add_tail(&crtc->head, &dev->crtc_config.crtc_list); + dev->crtc_config.num_crtc++; + + spin_unlock(&dev->crtc_config.config_lock); + + return crtc; +} +EXPORT_SYMBOL(drm_crtc_create); + +void drm_crtc_destroy(struct drm_crtc *crtc) +{ + drm_device_t *dev = crtc->dev; + + if (crtc->funcs->cleanup) + (*crtc->funcs->cleanup)(crtc); + + spin_lock(&dev->crtc_config.config_lock); + list_del(&crtc->head); + dev->crtc_config.num_crtc--; + spin_unlock(&dev->crtc_config.config_lock); + kfree(crtc); +} +EXPORT_SYMBOL(drm_crtc_destroy); + +bool drm_crtc_in_use(struct drm_crtc *crtc) +{ + struct drm_output *output; + drm_device_t *dev = crtc->dev; + list_for_each_entry(output, &dev->crtc_config.output_list, head) + if (output->crtc == crtc) + return true; + return false; +} +EXPORT_SYMBOL(drm_crtc_in_use); + +void drm_crtc_probe_output_modes(struct drm_device *dev, int maxX, int maxY) +{ + struct drm_output *output; + struct drm_display_mode *mode, *t; + int ret; + //if (maxX == 0 || maxY == 0) + // TODO + + list_for_each_entry(output, &dev->crtc_config.output_list, head) { + + list_for_each_entry_safe(mode, t, &output->modes, head) + drm_mode_remove(output, mode); + + output->status = (*output->funcs->detect)(output); + + if (output->status == output_status_disconnected) { + /* TODO set EDID to NULL */ + continue; + } + + ret = (*output->funcs->get_modes)(output); + + if (ret) { + /* move the modes over to the main mode list */ + drm_mode_list_concat(&output->probed_modes, + &output->modes); + } + + if (maxX && maxY) + drm_mode_validate_size(dev, &output->modes, maxX, + maxY, 0); + list_for_each_entry_safe(mode, t, &output->modes, head) { + if (mode->status == MODE_OK) + mode->status = (*output->funcs->mode_valid)(output,mode); + } + + + drm_mode_prune_invalid(dev, &output->modes, TRUE); + + if (list_empty(&output->modes)) + continue; + + drm_mode_sort(&output->modes); + + DRM_DEBUG("Probed modes for %s\n", output->name); + list_for_each_entry_safe(mode, t, &output->modes, head) { + mode->vrefresh = drm_mode_vrefresh(mode); + + drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); + drm_mode_debug_printmodeline(dev, mode); + } + } +} + +bool drm_crtc_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, + int x, int y) +{ + drm_device_t *dev = crtc->dev; + struct drm_display_mode *adjusted_mode, saved_mode; + int saved_x, saved_y; + bool didLock = false; + bool ret = false; + struct drm_output *output; + + adjusted_mode = drm_mode_duplicate(mode); + + crtc->enabled = drm_crtc_in_use(crtc); + + if (!crtc->enabled) { + return true; + } + + didLock = crtc->funcs->lock(crtc); + + saved_mode = crtc->mode; + saved_x = crtc->x; + saved_y = crtc->y; + + /* Update crtc values up front so the driver can rely on them for mode + * setting. + */ + crtc->mode = *mode; + crtc->x = x; + crtc->y = y; + + /* XXX short-circuit changes to base location only */ + + /* Pass our mode to the outputs and the CRTC to give them a chance to + * adjust it according to limitations or output properties, and also + * a chance to reject the mode entirely. + */ + list_for_each_entry(output, &dev->crtc_config.output_list, head) { + + if (output->crtc != crtc) + continue; + + if (!output->funcs->mode_fixup(output, mode, adjusted_mode)) { + goto done; + } + } + + if (!crtc->funcs->mode_fixup(crtc, mode, adjusted_mode)) { + goto done; + } + + /* Prepare the outputs and CRTCs before setting the mode. */ + list_for_each_entry(output, &dev->crtc_config.output_list, head) { + + if (output->crtc != crtc) + continue; + + /* Disable the output as the first thing we do. */ + output->funcs->prepare(output); + } + + crtc->funcs->prepare(crtc); + + /* Set up the DPLL and any output state that needs to adjust or depend + * on the DPLL. + */ + crtc->funcs->mode_set(crtc, mode, adjusted_mode, x, y); + list_for_each_entry(output, &dev->crtc_config.output_list, head) { + if (output->crtc == crtc) + output->funcs->mode_set(output, mode, adjusted_mode); + } + + /* Now, enable the clocks, plane, pipe, and outputs that we set up. */ + crtc->funcs->commit(crtc); + list_for_each_entry(output, &dev->crtc_config.output_list, head) { + if (output->crtc == crtc) + { + output->funcs->commit(output); +#if 0 // TODO def RANDR_12_INTERFACE + if (output->randr_output) + RRPostPendingProperties (output->randr_output); +#endif + } + } + + /* XXX free adjustedmode */ + ret = TRUE; + /* TODO */ +// if (scrn->pScreen) +// drm_crtc_set_screen_sub_pixel_order(dev); + +done: + if (!ret) { + crtc->x = saved_x; + crtc->y = saved_y; + crtc->mode = saved_mode; + } + + if (didLock) + crtc->funcs->unlock (crtc); + + return ret; +} + +bool drm_set_desired_modes(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct drm_output *output, *list_output; + + list_for_each_entry(crtc, &dev->crtc_config.crtc_list, head) { + output = NULL; + + list_for_each_entry(list_output, &dev->crtc_config.output_list, head) { + if (list_output->crtc == crtc) { + output = list_output; + break; + } + } + /* Skip disabled crtcs */ + if (!output) + continue; + + memset(&crtc->mode, 0, sizeof(crtc->mode)); + if (!crtc->desired_mode.crtc_hdisplay) { + + } + if (!drm_crtc_set_mode(crtc, &crtc->desired_mode, + crtc->desired_x, crtc->desired_y)) + return false; + } + + drm_disable_unused_functions(dev); + return true; +} +EXPORT_SYMBOL(drm_set_desired_modes); + +void drm_disable_unused_functions(struct drm_device *dev) +{ + struct drm_output *output; + struct drm_crtc *crtc; + + list_for_each_entry(output, &dev->crtc_config.output_list, head) { + if (!output->crtc) + (*output->funcs->dpms)(output, DPMSModeOff); + } + + list_for_each_entry(crtc, &dev->crtc_config.crtc_list, head) { + if (!crtc->enabled) + crtc->funcs->dpms(crtc, DPMSModeOff); + } +} + +/** + * drm_mode_probed_add - add a mode to the specified output's probed mode list + * @output: output the new mode + * @mode: mode data + * + * Add @mode to @output's mode list for later use. + */ +void drm_mode_probed_add(struct drm_output *output, struct drm_display_mode *mode) +{ + printk(KERN_ERR "adding DDC mode %s to output %s\n", mode->name, + output->name); + spin_lock(&output->modes_lock); + list_add(&mode->head, &output->probed_modes); + spin_unlock(&output->modes_lock); +} +EXPORT_SYMBOL(drm_mode_probed_add); + +/** + * drm_mode_remove - remove and free a mode + * @output: output list to modify + * @mode: mode to remove + * + * Remove @mode from @output's mode list, then free it. + */ +void drm_mode_remove(struct drm_output *output, struct drm_display_mode *mode) +{ + spin_lock(&output->modes_lock); + list_del(&mode->head); + spin_unlock(&output->modes_lock); + kfree(mode); +} +EXPORT_SYMBOL(drm_mode_remove); + +/* + * Probably belongs in the DRM device structure + */ +struct drm_output *drm_output_create(drm_device_t *dev, + const struct drm_output_funcs *funcs, + const char *name) +{ + struct drm_output *output = NULL; + + output = kmalloc(sizeof(struct drm_output), GFP_KERNEL); + if (!output) + return NULL; + + output->dev = dev; + output->funcs = funcs; + if (name) + strncpy(output->name, name, DRM_OUTPUT_LEN); + output->name[DRM_OUTPUT_LEN - 1] = 0; + output->subpixel_order = SubPixelUnknown; + INIT_LIST_HEAD(&output->probed_modes); + INIT_LIST_HEAD(&output->modes); + spin_lock_init(&output->modes_lock); + /* randr_output? */ + /* output_set_monitor(output)? */ + /* check for output_ignored(output)? */ + + spin_lock(&dev->crtc_config.config_lock); + list_add_tail(&output->head, &dev->crtc_config.output_list); + dev->crtc_config.num_output++; + + spin_unlock(&dev->crtc_config.config_lock); + + return output; + +} +EXPORT_SYMBOL(drm_output_create); + +void drm_output_destroy(struct drm_output *output) +{ + struct drm_device *dev = output->dev; + struct drm_display_mode *mode, *t; + + if (*output->funcs->cleanup) + (*output->funcs->cleanup)(output); + + list_for_each_entry_safe(mode, t, &output->probed_modes, head) + drm_mode_remove(output, mode); + + list_for_each_entry_safe(mode, t, &output->modes, head) + drm_mode_remove(output, mode); + + spin_lock(&dev->crtc_config.config_lock); + list_del(&output->head); + spin_unlock(&dev->crtc_config.config_lock); + kfree(output); +} +EXPORT_SYMBOL(drm_output_destroy); + +bool drm_output_rename(struct drm_output *output, const char *name) +{ + if (!name) + return false; + + strncpy(output->name, name, DRM_OUTPUT_LEN); + output->name[DRM_OUTPUT_LEN - 1] = 0; +// drm_output_set_monitor(output); +// if (drm_output_ignored(output)) +// return FALSE; + return TRUE; +} +EXPORT_SYMBOL(drm_output_rename); + +void drm_crtc_config_init(drm_device_t *dev) +{ + spin_lock_init(&dev->crtc_config.config_lock); + INIT_LIST_HEAD(&dev->crtc_config.fb_list); + INIT_LIST_HEAD(&dev->crtc_config.crtc_list); + INIT_LIST_HEAD(&dev->crtc_config.output_list); +} +EXPORT_SYMBOL(drm_crtc_config_init); + +void drm_framebuffer_set_object(drm_device_t *dev, unsigned long handle) +{ + struct drm_framebuffer *fb; + drm_user_object_t *uo; + drm_hash_item_t *hash; + drm_buffer_object_t *bo; + int ret; + + mutex_lock(&dev->struct_mutex); + ret = drm_ht_find_item(&dev->object_hash, handle, &hash); + if (ret) { + DRM_ERROR("Couldn't find handle.\n"); + goto out_err; + } + + uo = drm_hash_entry(hash, drm_user_object_t, hash); + if (uo->type != drm_buffer_type) { + ret = -EINVAL; + goto out_err; + } + + bo = drm_user_object_entry(uo, drm_buffer_object_t, base); + + /* get the first fb */ + list_for_each_entry(fb, &dev->crtc_config.fb_list, head) { + fb->offset = bo->offset; + break; + } + ret = 0; +out_err: + mutex_unlock(&dev->struct_mutex); + return ret; +} +EXPORT_SYMBOL(drm_framebuffer_set_object); + +bool drm_initial_config(drm_device_t *dev, bool can_grow) +{ + /* do a hardcoded initial configuration here */ + struct drm_crtc *crtc, *vga_crtc = NULL, *dvi_crtc = NULL; + struct drm_framebuffer *fb; + struct drm_output *output, *use_output = NULL; + + fb = drm_framebuffer_create(dev); + if (!fb) + return false; + + fb->pitch = 1024; + fb->width = 1024; + fb->height = 768; + fb->depth = 24; + fb->bits_per_pixel = 32; + + /* bind both CRTCs to this fb */ + /* only initialise one crtc to enabled state */ + list_for_each_entry(crtc, &dev->crtc_config.crtc_list, head) { + crtc->fb = fb; + if (!vga_crtc) { + vga_crtc = crtc; + crtc->enabled = 1; + crtc->desired_x = 0; + crtc->desired_y = 0; + } +#if 0 + else if (!dvi_crtc) { + dvi_crtc = crtc; + crtc->enabled = 1; + crtc->desired_x = 0; + crtc->desired_y = 0; + } +#endif + } + + drm_crtc_probe_output_modes(dev, 1024, 768); + + /* hard bind the CRTCS */ + + /* bind analog output to one crtc */ + list_for_each_entry(output, &dev->crtc_config.output_list, head) { + struct drm_display_mode *des_mode; + + if (strncmp(output->name, "VGA", 3)) { + output->crtc = vga_crtc; + /* just pull the first mode out of that hat */ + list_for_each_entry(des_mode, &output->modes, head) + break; + DRM_DEBUG("Setting desired mode for output %s\n", output->name); + drm_mode_debug_printmodeline(dev, des_mode); + output->crtc->desired_mode = *des_mode; + output->initial_x = 0; + output->initial_y = 0; + use_output = output; + } else if (strncmp(output->name, "TMDS", 4)) { + output->crtc = vga_crtc; +#if 0 + /* just pull the first mode out of that hat */ + list_for_each_entry(des_mode, &output->modes, head) + break; + DRM_DEBUG("Setting desired mode for output %s\n", output->name); + drm_mode_debug_printmodeline(dev, des_mode); + output->crtc->desired_mode = *des_mode; +#endif + output->initial_x = 0; + output->initial_y = 0; + } else + output->crtc = NULL; + + } + + return false; +} +EXPORT_SYMBOL(drm_initial_config); + +void drm_crtc_config_cleanup(drm_device_t *dev) +{ + struct drm_output *output, *ot; + struct drm_crtc *crtc, *ct; + + list_for_each_entry_safe(output, ot, &dev->crtc_config.output_list, head) { + drm_output_destroy(output); + } + + + list_for_each_entry_safe(crtc, ct, &dev->crtc_config.crtc_list, head) { + drm_crtc_destroy(crtc); + } +} +EXPORT_SYMBOL(drm_crtc_config_cleanup); + diff --git a/linux-core/drm_crtc.h b/linux-core/drm_crtc.h new file mode 100644 index 0000000..1be115d --- /dev/null +++ b/linux-core/drm_crtc.h @@ -0,0 +1,428 @@ +/* + * Copyright © 2006 Keith Packard + * Copyright © 2007 Intel Corporation + * Jesse Barnes + */ +#ifndef __DRM_CRTC_H__ +#define __DRM_CRTC_H__ + +#include +#include +#include +#include "drmP.h" +#include "drm.h" + +struct drm_device; + +/* + * Note on terminology: here, for brevity and convenience, we refer to output + * control chips as 'CRTCs'. They can control any type of output, VGA, LVDS, + * DVI, etc. And 'screen' refers to the whole of the visible display, which + * may span multiple monitors (and therefore multiple CRTC and output + * structures). + */ + +enum drm_mode_status { + MODE_OK = 0, /* Mode OK */ + MODE_HSYNC, /* hsync out of range */ + MODE_VSYNC, /* vsync out of range */ + MODE_H_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_V_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_BAD_WIDTH, /* requires an unsupported linepitch */ + MODE_NOMODE, /* no mode with a maching name */ + MODE_NO_INTERLACE, /* interlaced mode not supported */ + MODE_NO_DBLESCAN, /* doublescan mode not supported */ + MODE_NO_VSCAN, /* multiscan mode not supported */ + MODE_MEM, /* insufficient video memory */ + MODE_VIRTUAL_X, /* mode width too large for specified virtual size */ + MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */ + MODE_MEM_VIRT, /* insufficient video memory given virtual size */ + MODE_NOCLOCK, /* no fixed clock available */ + MODE_CLOCK_HIGH, /* clock required is too high */ + MODE_CLOCK_LOW, /* clock required is too low */ + MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */ + MODE_BAD_HVALUE, /* horizontal timing was out of range */ + MODE_BAD_VVALUE, /* vertical timing was out of range */ + MODE_BAD_VSCAN, /* VScan value out of range */ + MODE_HSYNC_NARROW, /* horizontal sync too narrow */ + MODE_HSYNC_WIDE, /* horizontal sync too wide */ + MODE_HBLANK_NARROW, /* horizontal blanking too narrow */ + MODE_HBLANK_WIDE, /* horizontal blanking too wide */ + MODE_VSYNC_NARROW, /* vertical sync too narrow */ + MODE_VSYNC_WIDE, /* vertical sync too wide */ + MODE_VBLANK_NARROW, /* vertical blanking too narrow */ + MODE_VBLANK_WIDE, /* vertical blanking too wide */ + MODE_PANEL, /* exceeds panel dimensions */ + MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */ + MODE_ONE_WIDTH, /* only one width is supported */ + MODE_ONE_HEIGHT, /* only one height is supported */ + MODE_ONE_SIZE, /* only one resolution is supported */ + MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */ + MODE_BAD = -2, /* unspecified reason */ + MODE_ERROR = -1 /* error condition */ +}; + +#define DRM_MODE_TYPE_BUILTIN (1<<0) +#define DRM_MODE_TYPE_CLOCK_C ((1<<1) | DRM_MODE_TYPE_BUILTIN) +#define DRM_MODE_TYPE_CRTC_C ((1<<2) | DRM_MODE_TYPE_BUILTIN) +#define DRM_MODE_TYPE_PREFERRED (1<<3) +#define DRM_MODE_TYPE_DEFAULT (1<<4) +#define DRM_MODE_TYPE_USERDEF (1<<5) +#define DRM_MODE_TYPE_DRIVER (1<<6) + +#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \ + DRM_MODE_TYPE_CRTC_C) + +#define DRM_DISPLAY_MODE_LEN 32 + +#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \ + .name = nm, .status = 0, .type = (t), .clock = (c), \ + .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ + .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ + .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ + .vscan = (vs), .flags = (f) + +struct drm_display_mode { + /* Header */ + struct list_head head; + char name[DRM_DISPLAY_MODE_LEN]; + enum drm_mode_status status; + int type; + + /* Proposed mode values */ + int clock; + int hdisplay; + int hsync_start; + int hsync_end; + int htotal; + int hskew; + int vdisplay; + int vsync_start; + int vsync_end; + int vtotal; + int vscan; + unsigned int flags; + + /* Actual mode we give to hw */ + int clock_index; + int synth_clock; + int crtc_hdisplay; + int crtc_hblank_start; + int crtc_hblank_end; + int crtc_hsync_start; + int crtc_hsync_end; + int crtc_htotal; + int crtc_hskew; + int crtc_vdisplay; + int crtc_vblank_start; + int crtc_vblank_end; + int crtc_vsync_start; + int crtc_vsync_end; + int crtc_vtotal; + int crtc_hadjusted; + int crtc_vadjusted; + + /* Driver private mode info */ + int private_size; + int *private; + int private_flags; + + int vrefresh; + float hsync;//, vrefresh; +}; + +/* Video mode flags */ +#define V_PHSYNC (1<<0) +#define V_NHSYNC (1<<1) +#define V_PVSYNC (1<<2) +#define V_NVSYNC (1<<3) +#define V_INTERLACE (1<<4) +#define V_DBLSCAN (1<<5) +#define V_CSYNC (1<<6) +#define V_PCSYNC (1<<7) +#define V_NCSYNC (1<<8) +#define V_HSKEW (1<<9) /* hskew provided */ +#define V_BCAST (1<<10) +#define V_PIXMUX (1<<11) +#define V_DBLCLK (1<<12) +#define V_CLKDIV2 (1<<13) + +#define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */ +#define DPMSModeOn 0 +#define DPMSModeStandby 1 +#define DPMSModeSuspend 2 +#define DPMSModeOff 3 + +enum drm_output_status { + output_status_connected, + output_status_disconnected, + output_status_unknown, +}; + +enum subpixel_order { + SubPixelUnknown = 0, + SubPixelHorizontalRGB, + SubPixelHorizontalBGR, + SubPixelVerticalRGB, + SubPixelVerticalBGR, + SubPixelNone, +}; + +struct drm_framebuffer { + struct drm_device *dev; + struct list_head head; + unsigned int pitch; + unsigned long offset; + unsigned int width; + unsigned int height; + /* depth can be 15 or 16 */ + unsigned int depth; + int bits_per_pixel; + int flags; +}; +struct drm_crtc; +struct drm_output; + +/** + * drm_crtc_funcs - control CRTCs for a given device + * @dpms: control display power levels + * @save: save CRTC state + * @resore: restore CRTC state + * @lock: lock the CRTC + * @unlock: unlock the CRTC + * @shadow_allocate: allocate shadow pixmap + * @shadow_create: create shadow pixmap for rotation support + * @shadow_destroy: free shadow pixmap + * @mode_fixup: fixup proposed mode + * @mode_set: set the desired mode on the CRTC + * @gamma_set: specify color ramp for CRTC + * @cleanup: cleanup driver private state prior to close + * + * The drm_crtc_funcs structure is the central CRTC management structure + * in the DRM. Each CRTC controls one or more outputs (note that the name + * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. + * outputs, not just CRTs). + * + * Each driver is responsible for filling out this structure at startup time, + * in addition to providing other modesetting features, like i2c and DDC + * bus accessors. + */ +struct drm_crtc_funcs { + /* + * Control power levels on the CRTC. If the mode passed in is + * unsupported, the provider must use the next lowest power level. + */ + void (*dpms)(struct drm_crtc *crtc, int mode); + + /* JJJ: Are these needed? */ + /* Save CRTC state */ + void (*save)(struct drm_crtc *crtc); /* suspend? */ + /* Restore CRTC state */ + void (*restore)(struct drm_crtc *crtc); /* resume? */ + bool (*lock)(struct drm_crtc *crtc); + void (*unlock)(struct drm_crtc *crtc); + + void (*prepare)(struct drm_crtc *crtc); + void (*commit)(struct drm_crtc *crtc); + + /* Provider can fixup or change mode timings before modeset occurs */ + bool (*mode_fixup)(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + /* Actually set the mode */ + void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y); + /* Set gamma on the CRTC */ + void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, + int size); + /* Driver cleanup routine */ + void (*cleanup)(struct drm_crtc *crtc); +}; + +/** + * drm_crtc - central CRTC control structure + * @enabled: is this CRTC enabled? + * @x: x position on screen + * @y: y position on screen + * @desired_mode: new desired mode + * @desired_x: desired x for desired_mode + * @desired_y: desired y for desired_mode + * @funcs: CRTC control functions + * @driver_private: arbitrary driver data + * + * Each CRTC may have one or more outputs associated with it. This structure + * allows the CRTC to be controlled. + */ +struct drm_crtc { + struct drm_device *dev; + struct list_head head; + + /* framebuffer the CRTC is currently bound to */ + struct drm_framebuffer *fb; + + bool enabled; + + /* JJJ: are these needed? */ + bool cursor_in_range; + bool cursor_shown; + + struct drm_display_mode mode; + + int x, y; + struct drm_display_mode desired_mode; + int desired_x, desired_y; + const struct drm_crtc_funcs *funcs; + void *driver_private; + + /* RRCrtcPtr randr_crtc? */ +}; + +extern struct drm_crtc *drm_crtc_create(struct drm_device *dev, + const struct drm_crtc_funcs *funcs); + +/** + * drm_output_funcs - control outputs on a given device + * @init: setup this output + * @dpms: set power state (see drm_crtc_funcs above) + * @save: save output state + * @restore: restore output state + * @mode_valid: is this mode valid on the given output? + * @mode_fixup: try to fixup proposed mode for this output + * @mode_set: set this mode + * @detect: is this output active? + * @get_modes: get mode list for this output + * @set_property: property for this output may need update + * @cleanup: output is going away, cleanup + * + * Each CRTC may have one or more outputs attached to it. The functions + * below allow the core DRM code to control outputs, enumerate available modes, + * etc. + */ +struct drm_output_funcs { + void (*init)(struct drm_output *output); + void (*dpms)(struct drm_output *output, int mode); + void (*save)(struct drm_output *output); + void (*restore)(struct drm_output *output); + int (*mode_valid)(struct drm_output *output, + struct drm_display_mode *mode); + bool (*mode_fixup)(struct drm_output *output, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + void (*prepare)(struct drm_output *output); + void (*commit)(struct drm_output *output); + void (*mode_set)(struct drm_output *output, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + enum drm_output_status (*detect)(struct drm_output *output); + int (*get_modes)(struct drm_output *output); + /* JJJ: type checking for properties via property value type */ + bool (*set_property)(struct drm_output *output, int prop, void *val); + void (*cleanup)(struct drm_output *output); +}; + +#define DRM_OUTPUT_LEN 32 +/** + * drm_output - central DRM output control structure + * @crtc: CRTC this output is currently connected to, NULL if none + * @possible_crtcs: bitmap of CRTCS this output could be attached to + * @possible_clones: bitmap of possible outputs this output could clone + * @interlace_allowed: can this output handle interlaced modes? + * @doublescan_allowed: can this output handle doublescan? + * @available_modes: modes available on this output (from get_modes() + user) + * @initial_x: initial x position for this output + * @initial_y: initial y position for this output + * @status: output connected? + * @subpixel_order: for this output + * @mm_width: displayable width of output in mm + * @mm_height: displayable height of output in mm + * @name: name of output (should be one of a few standard names) + * @funcs: output control functions + * @driver_private: private driver data + * + * Each output may be connected to one or more CRTCs, or may be clonable by + * another output if they can share a CRTC. Each output also has a specific + * position in the broader display (referred to as a 'screen' though it could + * span multiple monitors). + */ +struct drm_output { + struct drm_device *dev; + struct list_head head; + struct drm_crtc *crtc; + unsigned long possible_crtcs; + unsigned long possible_clones; + bool interlace_allowed; + bool doublescan_allowed; + spinlock_t modes_lock; + struct list_head modes; /* list of modes on this output */ + /* + OptionInfoPtr options; + XF86ConfMonitorPtr conf_monitor; + */ + int initial_x, initial_y; + enum drm_output_status status; + + /* these are modes added by probing with DDC or the BIOS */ + struct list_head probed_modes; + + /* xf86MonPtr MonInfo; */ + enum subpixel_order subpixel_order; + int mm_width, mm_height; + char name[DRM_OUTPUT_LEN]; + const struct drm_output_funcs *funcs; + void *driver_private; + /* RROutputPtr randr_output? */ +}; + +/** + * struct drm_crtc_config_funcs - configure CRTCs for a given screen layout + * @resize: adjust CRTCs as necessary for the proposed layout + * + * Currently only a resize hook is available. DRM will call back into the + * driver with a new screen width and height. If the driver can't support + * the proposed size, it can return false. Otherwise it should adjust + * the CRTC<->output mappings as needed and update its view of the screen. + */ +struct drm_crtc_config_funcs { + bool (*resize)(struct drm_device *dev, int width, int height); +}; + +/** + * drm_crtc_config - CRTC configuration control structure + * + */ +struct drm_crtc_config { + spinlock_t config_lock; + /* this is limited to one for now */ + int num_fb; + struct list_head fb_list; + int num_output; + struct list_head output_list; + + /* int compat_output? */ + int num_crtc; + struct list_head crtc_list; + + int min_width, min_height; + int max_width, max_height; + /* DamagePtr rotationDamage? */ + /* DGA stuff? */ + struct drm_crtc_config_funcs *funcs; +}; + +struct drm_output *drm_output_create(struct drm_device *dev, + const struct drm_output_funcs *funcs, + const char *name); +void drm_output_destroy(struct drm_output *output); +bool drm_output_rename(struct drm_output *output, const char *name); + +int drm_add_edid_modes(struct drm_output *output, + struct i2c_adapter *adapter); +void drm_mode_probed_add(struct drm_output *output, struct drm_display_mode *mode); +void drm_mode_remove(struct drm_output *output, struct drm_display_mode *mode); +extern struct drm_display_mode *drm_mode_duplicate(struct drm_display_mode *mode); +extern void drm_mode_debug_printmodeline(struct drm_device *dev, + struct drm_display_mode *mode); +extern void drm_crtc_config_init(struct drm_device *dev); +extern void drm_crtc_config_cleanup(struct drm_device *dev); +extern void drm_disable_unused_functions(struct drm_device *dev); +#endif /* __DRM_CRTC_H__ */ diff --git a/linux-core/drm_edid.c b/linux-core/drm_edid.c new file mode 100644 index 0000000..3c12375 --- /dev/null +++ b/linux-core/drm_edid.c @@ -0,0 +1,515 @@ +#include +#include +#include "drmP.h" +#include "intel_drv.h" + +/* + * DDC/EDID probing rippped off from FB layer + */ + +#include "edid.h" +#define DDC_ADDR 0x50 + +#ifdef BIG_ENDIAN +#error "EDID structure is little endian, need big endian versions" +#endif + +struct est_timings { + u8 t1; + u8 t2; + u8 mfg_rsvd; +} __attribute__((packed)); + +struct std_timing { + u8 hsize; /* need to multiply by 8 then add 248 */ + u8 vfreq:6; /* need to add 60 */ + u8 aspect_ratio:2; /* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */ +} __attribute__((packed)); + +/* If detailed data is pixel timing */ +struct detailed_pixel_timing { + u8 hactive_lo; + u8 hblank_lo; + u8 hblank_hi:4; + u8 hactive_hi:4; + u8 vactive_lo; + u8 vblank_lo; + u8 vblank_hi:4; + u8 vactive_hi:4; + u8 hsync_offset_lo; + u8 hsync_pulse_width_lo; + u8 vsync_pulse_width_lo:4; + u8 vsync_offset_lo:4; + u8 hsync_pulse_width_hi:2; + u8 hsync_offset_hi:2; + u8 vsync_pulse_width_hi:2; + u8 vsync_offset_hi:2; + u8 width_mm_lo; + u8 height_mm_lo; + u8 height_mm_hi:4; + u8 width_mm_hi:4; + u8 hborder; + u8 vborder; + u8 unknown0:1; + u8 vsync_positive:1; + u8 hsync_positive:1; + u8 separate_sync:2; + u8 stereo:1; + u8 unknown6:1; + u8 interlaced:1; +} __attribute__((packed)); + +/* If it's not pixel timing, it'll be one of the below */ +struct detailed_data_string { + u8 str[13]; +} __attribute__((packed)); + +struct detailed_data_monitor_range { + u8 min_vfreq; + u8 max_vfreq; + u8 min_hfreq_khz; + u8 max_hfreq_khz; + u8 pixel_clock_mhz; /* need to multiply by 10 */ + u16 sec_gtf_toggle; /* A000=use above, 20=use below */ + u8 hfreq_start_khz; /* need to multiply by 2 */ + u8 c; /* need to divide by 2 */ + u16 m; + u8 k; + u8 j; /* need to divide by 2 */ +} __attribute__((packed)); + +struct detailed_data_wpindex { + u8 white_y_lo:2; + u8 white_x_lo:2; + u8 pad:4; + u8 white_x_hi; + u8 white_y_hi; + u8 gamma; /* need to divide by 100 then add 1 */ +} __attribute__((packed)); + +struct detailed_data_color_point { + u8 windex1; + u8 wpindex1[3]; + u8 windex2; + u8 wpindex2[3]; +} __attribute__((packed)); + +struct detailed_non_pixel { + u8 pad1; + u8 type; /* ff=serial, fe=string, fd=monitor range, fc=monitor name + fb=color point data, fa=standard timing data, + f9=undefined, f8=mfg. reserved */ + u8 pad2; + union { + struct detailed_data_string str; + struct detailed_data_monitor_range range; + struct detailed_data_wpindex color; + struct std_timing timings[5]; + } data; +} __attribute__((packed)); + +#define EDID_DETAIL_STD_MODES 0xfa +#define EDID_DETAIL_CPDATA 0xfb +#define EDID_DETAIL_NAME 0xfc +#define EDID_DETAIL_RANGE 0xfd +#define EDID_DETAIL_STRING 0xfe +#define EDID_DETAIL_SERIAL 0xff + +struct detailed_timing { + u16 pixel_clock; /* need to multiply by 10 KHz */ + union { + struct detailed_pixel_timing pixel_data; + struct detailed_non_pixel other_data; + } data; +} __attribute__((packed)); + +struct edid { + u8 header[8]; + /* Vendor & product info */ + u16 mfg_id; + u16 prod_code; + u32 serial; + u8 mfg_week; + u8 mfg_year; + /* EDID version */ + u8 version; + u8 revision; + /* Display info: */ + /* input definition */ + u8 serration_vsync:1; + u8 sync_on_green:1; + u8 composite_sync:1; + u8 separate_syncs:1; + u8 blank_to_black:1; + u8 video_level:2; + u8 digital:1; /* bits below must be zero if set */ + u8 width_cm; + u8 height_cm; + u8 gamma; + /* feature support */ + u8 default_gtf:1; + u8 preferred_timing:1; + u8 standard_color:1; + u8 display_type:2; /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */ + u8 pm_active_off:1; + u8 pm_suspend:1; + u8 pm_standby:1; + /* Color characteristics */ + u8 red_green_lo; + u8 black_white_lo; + u8 red_x; + u8 red_y; + u8 green_x; + u8 green_y; + u8 blue_x; + u8 blue_y; + u8 white_x; + u8 white_y; + /* Est. timings and mfg rsvd timings*/ + struct est_timings established_timings; + /* Standard timings 1-8*/ + struct std_timing standard_timings[8]; + /* Detailing timings 1-4 */ + struct detailed_timing detailed_timings[4]; + /* Number of 128 byte ext. blocks */ + u8 extensions; + /* Checksum */ + u8 checksum; +} __attribute__((packed)); + +static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 }; + +static bool edid_valid(struct edid *edid) +{ + int i; + u8 csum = 0; + u8 *raw_edid = (u8 *)edid; + + if (memcmp(edid->header, edid_header, sizeof(edid_header))) + goto bad; + if (edid->version != 1) + goto bad; + if (edid->revision <= 0 || edid->revision > 3) + goto bad; + + for (i = 0; i < EDID_LENGTH; i++) + csum += raw_edid[i]; + if (csum) + goto bad; + + return 1; + +bad: + return 0; +} + +/** + * drm_mode_std - convert standard mode info (width, height, refresh) into mode + * @t: standard timing params + * + * Take the standard timing params (in this case width, aspect, and refresh) + * and convert them into a real mode using CVT. + * + * Punts for now. + */ +struct drm_display_mode *drm_mode_std(struct std_timing *t) +{ +// struct fb_videomode mode; + +// fb_find_mode_cvt(&mode, 0, 0); + /* JJJ: convert to drm_display_mode */ + struct drm_display_mode *mode; + int hsize = t->hsize * 8 + 248, vsize; + + mode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL); + if (!mode) + return NULL; + + if (t->aspect_ratio == 0) + vsize = (hsize * 10) / 16; + else if (t->aspect_ratio == 1) + vsize = (hsize * 3) / 4; + else if (t->aspect_ratio == 2) + vsize = (hsize * 4) / 5; + else + vsize = (hsize * 9) / 16; + + snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d", hsize, vsize); + + return mode; +} + +struct drm_display_mode *drm_mode_detailed(struct detailed_timing *timing, + bool preferred) +{ + struct drm_display_mode *mode; + struct detailed_pixel_timing *pt = &timing->data.pixel_data; + + if (pt->stereo) { + printk(KERN_ERR "stereo mode not supported\n"); + return NULL; + } + if (!pt->separate_sync) { + printk(KERN_ERR "integrated sync not supported\n"); + return NULL; + } + + mode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL); + if (!mode) + return NULL; + + mode->type = DRM_MODE_TYPE_DRIVER; + mode->type |= preferred ? DRM_MODE_TYPE_PREFERRED : 0; + mode->clock = timing->pixel_clock / 100; + + mode->hdisplay = (pt->hactive_hi << 8) | pt->hactive_lo; + mode->hsync_start = mode->hdisplay + ((pt->hsync_offset_hi << 8) | + pt->hsync_offset_lo); + mode->hsync_end = mode->hsync_start + + ((pt->hsync_pulse_width_hi << 8) | + pt->hsync_pulse_width_lo); + mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo); + + mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo; + mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) | + pt->vsync_offset_lo); + mode->vsync_end = mode->vsync_start + + ((pt->vsync_pulse_width_hi << 8) | + pt->vsync_pulse_width_lo); + mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo); + + snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d", mode->hdisplay, + mode->vdisplay); + + if (pt->interlaced) + mode->flags |= V_INTERLACE; + + mode->flags |= pt->hsync_positive ? V_PHSYNC : V_NHSYNC; + mode->flags |= pt->vsync_positive ? V_PVSYNC : V_NVSYNC; + + return mode; +} + +static struct drm_display_mode established_modes[] = { + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840, + 968, 1056, 0, 600, 601, 605, 628, 0, + V_PHSYNC | V_PVSYNC) }, /* 800x600@60Hz */ + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824, + 896, 1024, 0, 600, 601, 603, 625, 0, + V_PHSYNC | V_PVSYNC) }, /* 800x600@56Hz */ + { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656, + 720, 840, 0, 480, 481, 484, 500, 0, + V_NHSYNC | V_NVSYNC) }, /* 640x480@75Hz */ + { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664, + 704, 832, 0, 480, 489, 491, 520, 0, + V_NHSYNC | V_NVSYNC) }, /* 640x480@72Hz */ + { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704, + 768, 864, 0, 480, 483, 486, 525, 0, + V_NHSYNC | V_NVSYNC) }, /* 640x480@67Hz */ + { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656, + 752, 800, 0, 480, 490, 492, 525, 0, + V_NHSYNC | V_NVSYNC) }, /* 640x480@60Hz */ + { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738, + 846, 900, 0, 400, 421, 423, 449, 0, + V_NHSYNC | V_NVSYNC) }, /* 720x400@88Hz */ + { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738, + 846, 900, 0, 400, 412, 414, 449, 0, + V_NHSYNC | V_PVSYNC) }, /* 720x400@70Hz */ + { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296, + 1440, 1688, 0, 1024, 1025, 1028, 1066, 0, + V_PHSYNC | V_PVSYNC) }, /* 1280x1024@75Hz */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040, + 1136, 1312, 0, 768, 769, 772, 800, 0, + V_PHSYNC | V_PVSYNC) }, /* 1024x768@75Hz */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048, + 1184, 1328, 0, 768, 771, 777, 806, 0, + V_NHSYNC | V_NVSYNC) }, /* 1024x768@70Hz */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, + 1184, 1344, 0, 768, 771, 777, 806, 0, + V_NHSYNC | V_NVSYNC) }, /* 1024x768@60Hz */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032, + 1208, 1264, 0, 768, 768, 776, 817, 0, + V_PHSYNC | V_PVSYNC | V_INTERLACE) }, /* 1024x768@43Hz */ + { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864, + 928, 1152, 0, 624, 625, 628, 667, 0, + V_NHSYNC | V_NVSYNC) }, /* 832x624@75Hz */ + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816, + 896, 1056, 0, 600, 601, 604, 625, 0, + V_PHSYNC | V_PVSYNC) }, /* 800x600@75Hz */ + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856, + 976, 1040, 0, 600, 637, 643, 666, 0, + V_PHSYNC | V_PVSYNC) }, /* 800x600@72Hz */ + { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216, + 1344, 1600, 0, 864, 865, 868, 900, 0, + V_PHSYNC | V_PVSYNC) }, /* 1152x864@75Hz */ +}; + +#define EDID_EST_TIMINGS 16 +#define EDID_STD_TIMINGS 8 +#define EDID_DETAILED_TIMINGS 4 + +/** + * add_established_modes - get est. modes from EDID and add them + * @edid: EDID block to scan + * + * Each EDID block contains a bitmap of the supported "established modes" list + * (defined above). Tease them out and add them to the global modes list. + */ +static int add_established_modes(struct drm_output *output, struct edid *edid) +{ + unsigned long est_bits = edid->established_timings.t1 | + (edid->established_timings.t2 << 8) | + ((edid->established_timings.mfg_rsvd & 0x80) << 9); + int i, modes = 0; + + for (i = 0; i <= EDID_EST_TIMINGS; i++) + if (est_bits & (1<standard_timings[i]; + + /* If std timings bytes are 1, 1 it's empty */ + if (t->hsize == 1 && (t->aspect_ratio | t->vfreq) == 1) + continue; + + drm_mode_probed_add(output, + drm_mode_std(&edid->standard_timings[i])); + modes++; + } + + return modes; +} + +/** + * add_detailed_modes - get detailed mode info from EDID data + * @edid: EDID block to scan + * + * Some of the detailed timing sections may contain mode information. Grab + * it and add it to the list. + */ +static int add_detailed_info(struct drm_output *output, struct edid *edid) +{ + int i, j, modes = 0; + bool preferred = 0; + + for (i = 0; i < EDID_DETAILED_TIMINGS; i++) { + struct detailed_timing *timing = &edid->detailed_timings[i]; + struct detailed_non_pixel *data = &timing->data.other_data; + + /* EDID up to and including 1.2 may put monitor info here */ + if (edid->version == 1 && edid->revision < 3) + continue; + + /* Detailed mode timing */ + if (timing->pixel_clock) { + if (i == 0 && edid->preferred_timing) + preferred = 1; + drm_mode_probed_add(output, + drm_mode_detailed(timing, preferred)); + modes++; + continue; + } + + /* Other timing or info */ + switch (data->type) { + case EDID_DETAIL_SERIAL: + break; + case EDID_DETAIL_STRING: + break; + case EDID_DETAIL_RANGE: + break; + case EDID_DETAIL_NAME: + break; + case EDID_DETAIL_CPDATA: + break; + case EDID_DETAIL_STD_MODES: + /* Five modes per detailed section */ + for (j = 0; j < 5; i++) { + struct std_timing *std; + + std = &data->data.timings[j]; + drm_mode_probed_add(output, drm_mode_std(std)); + modes++; + } + break; + default: + break; + } + } + + return modes; +} + +/** + * drm_add_edid_modes - add modes from EDID data, if available + * @output: output we're probing + * @adapter: i2c adapter to use for DDC + * + * Poke the given output's i2c channel to grab EDID data if possible. If we + * get any, add the specified modes to the output's mode list. + * + * Return number of modes added or 0 if we couldn't find any. + */ +int drm_add_edid_modes(struct drm_output *output, struct i2c_adapter *adapter) +{ + struct edid *edid; + u8 *raw_edid; + int i, est_modes, std_modes, det_modes; + + edid = (struct edid *)fb_ddc_read(adapter); + + if (!edid) { + dev_warn(&output->dev->pdev->dev, "no EDID data\n"); + goto out_err; + } + + if (!edid_valid(edid)) { + dev_warn(&output->dev->pdev->dev, "EDID invalid, ignoring.\n"); + goto out_err; + } + + est_modes = add_established_modes(output, edid); + std_modes = add_standard_modes(output, edid); + det_modes = add_detailed_info(output, edid); + printk(KERN_ERR "est modes: %d, std_modes: %d, det_modes: %d\n", + est_modes, std_modes, det_modes); + + raw_edid = (u8 *)edid; + printk(KERN_ERR "EDID:\n" KERN_ERR); + for (i = 0; i < EDID_LENGTH; i++) { + if (i != 0 && ((i % 16) == 0)) + printk("\n" KERN_ERR); + printk("%02x", raw_edid[i] & 0xff); + } + printk("\n"); + + printk(KERN_ERR "EDID info:\n"); + printk(KERN_ERR " mfg_id: 0x%04x\n", edid->mfg_id); + printk(KERN_ERR " digital? %s\n", edid->digital ? "Yes" : "No"); + printk(KERN_ERR " extensions: %d\n", edid->extensions); + + return est_modes + std_modes + det_modes; + +out_err: + kfree(edid); + return 0; +} +EXPORT_SYMBOL(drm_add_edid_modes); diff --git a/linux-core/drm_modes.c b/linux-core/drm_modes.c new file mode 100644 index 0000000..2347a66 --- /dev/null +++ b/linux-core/drm_modes.c @@ -0,0 +1,304 @@ +/* + * Copyright © 2007 Dave Airlie + * + * Based on code from X.org - Copyright (c) 1997-2003 by The XFree86 Project, Inc. + */ + +#include +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" + +void drm_mode_debug_printmodeline(struct drm_device *dev, + struct drm_display_mode *mode) +{ + DRM_DEBUG("Modeline \"%s\" %d %d %d %d %d %d %d %d %d %d\n", + mode->name, mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal); +} +EXPORT_SYMBOL(drm_mode_debug_printmodeline); + +void drm_mode_list_concat(struct list_head *head, struct list_head *new) +{ + + struct list_head *entry, *tmp; + + list_for_each_safe(entry, tmp, head) { + list_move_tail(entry, new); + } +} + +int drm_mode_width(struct drm_display_mode *mode) +{ + return mode->hdisplay; + +} +EXPORT_SYMBOL(drm_mode_width); + +int drm_mode_height(struct drm_display_mode *mode) +{ + return mode->vdisplay; +} +EXPORT_SYMBOL(drm_mode_height); + +int drm_mode_vrefresh(struct drm_display_mode *mode) +{ + int refresh = 0; + + if (mode->vrefresh > 0) + refresh = mode->vrefresh; + else if (mode->htotal > 0 && mode->vtotal > 0) { + refresh = ((mode->clock * 1000) * 1000) / mode->htotal / mode->vtotal; + if (mode->flags & V_INTERLACE) + refresh *= 2; + if (mode->flags & V_DBLSCAN) + refresh /= 2; + if (mode->vscan > 1) + refresh /= mode->vscan; + } + return refresh; +} +EXPORT_SYMBOL(drm_mode_vrefresh); + + +void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) +{ + if ((p == NULL) || ((p->type & DRM_MODE_TYPE_CRTC_C) == DRM_MODE_TYPE_BUILTIN)) + return; + + p->crtc_hdisplay = p->hdisplay; + p->crtc_hsync_start = p->hsync_start; + p->crtc_hsync_end = p->hsync_end; + p->crtc_htotal = p->htotal; + p->crtc_hskew = p->hskew; + p->crtc_vdisplay = p->vdisplay; + p->crtc_vsync_start = p->vsync_start; + p->crtc_vsync_end = p->vsync_end; + p->crtc_vtotal = p->vtotal; + + if (p->flags & V_INTERLACE) { + if (adjust_flags & CRTC_INTERLACE_HALVE_V) { + p->crtc_vdisplay /= 2; + p->crtc_vsync_start /= 2; + p->crtc_vsync_end /= 2; + p->crtc_vtotal /= 2; + } + + p->crtc_vtotal |= 1; + } + + if (p->flags & V_DBLSCAN) { + p->crtc_vdisplay *= 2; + p->crtc_vsync_start *= 2; + p->crtc_vsync_end *= 2; + p->crtc_vtotal *= 2; + } + + if (p->vscan > 1) { + p->crtc_vdisplay *= p->vscan; + p->crtc_vsync_start *= p->vscan; + p->crtc_vsync_end *= p->vscan; + p->crtc_vtotal *= p->vscan; + } + + p->crtc_vblank_start = min(p->crtc_vsync_start, p->crtc_vdisplay); + p->crtc_vblank_end = min(p->crtc_vsync_end, p->crtc_vtotal); + p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay); + p->crtc_hblank_end = min(p->crtc_hsync_end, p->crtc_htotal); + + p->crtc_hadjusted = false; + p->crtc_vadjusted = false; +} +EXPORT_SYMBOL(drm_mode_set_crtcinfo); + + +struct drm_display_mode *drm_mode_duplicate(struct drm_display_mode *mode) +{ + struct drm_display_mode *nmode; + + nmode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL); + if (!nmode) + return NULL; + + *nmode = *mode; + INIT_LIST_HEAD(&nmode->head); + return nmode; +} +EXPORT_SYMBOL(drm_mode_duplicate); + +bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2) +{ + if (mode1->clock == mode2->clock && + mode1->hdisplay == mode2->hdisplay && + mode1->hsync_start == mode2->hsync_start && + mode1->hsync_end == mode2->hsync_end && + mode1->htotal == mode2->htotal && + mode1->hskew == mode2->hskew && + mode1->vdisplay == mode2->vdisplay && + mode1->vsync_start == mode2->vsync_start && + mode1->vsync_end == mode2->vsync_end && + mode1->vtotal == mode2->vtotal && + mode1->vscan == mode2->vscan && + mode1->flags == mode2->flags) + return true; + + return false; +} +EXPORT_SYMBOL(drm_mode_equal); + +void drm_mode_validate_size(struct drm_device *dev, + struct list_head *mode_list, + int maxX, int maxY, int maxPitch) +{ + struct drm_display_mode *mode; + + list_for_each_entry(mode, mode_list, head) { + if (maxPitch > 0 && mode->hdisplay > maxPitch) + mode->status = MODE_BAD_WIDTH; + + if (maxX > 0 && mode->hdisplay > maxX) + mode->status = MODE_VIRTUAL_X; + + if (maxY > 0 && mode->vdisplay > maxY) + mode->status = MODE_VIRTUAL_Y; + } +} +EXPORT_SYMBOL(drm_mode_validate_size); + +void drm_mode_validate_clocks(struct drm_device *dev, + struct list_head *mode_list, + int *min, int *max, int n_ranges) +{ + struct drm_display_mode *mode; + int i; + + list_for_each_entry(mode, mode_list, head) { + bool good = false; + for (i = 0; i < n_ranges; i++) { + if (mode->clock >= min[i] && mode->clock <= max[i]) { + good = true; + break; + } + } + if (!good) + mode->status = MODE_CLOCK_RANGE; + } +} +EXPORT_SYMBOL(drm_mode_validate_clocks); + +void drm_mode_prune_invalid(struct drm_device *dev, + struct list_head *mode_list, bool verbose) +{ + struct drm_display_mode *mode, *t; + + list_for_each_entry_safe(mode, t, mode_list, head) { + if (mode->status != MODE_OK) { + list_del(&mode->head); + if (verbose) + DRM_DEBUG("Not using %s mode %d\n", mode->name, mode->status); + kfree(mode); + } + } +} + +static int drm_mode_compare(struct list_head *lh_a, struct list_head *lh_b) +{ + struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head); + struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head); + int diff; + + diff = ((b->type & DRM_MODE_TYPE_PREFERRED) != 0) - + ((a->type & DRM_MODE_TYPE_PREFERRED) != 0); + if (diff) + return diff; + diff = b->hdisplay * b->vdisplay - a->hdisplay * a->vdisplay; + if (diff) + return diff; + diff = b->clock - a->clock; + return diff; +} + +/* list sort from Mark J Roberts (mjr@znex.org) */ +void list_sort(struct list_head *head, int (*cmp)(struct list_head *a, struct list_head *b)) +{ + struct list_head *p, *q, *e, *list, *tail, *oldhead; + int insize, nmerges, psize, qsize, i; + + list = head->next; + list_del(head); + insize = 1; + for (;;) { + p = oldhead = list; + list = tail = NULL; + nmerges = 0; + + while (p) { + nmerges++; + q = p; + psize = 0; + for (i = 0; i < insize; i++) { + psize++; + q = q->next == oldhead ? NULL : q->next; + if (!q) + break; + } + + qsize = insize; + while (psize > 0 || (qsize > 0 && q)) { + if (!psize) { + e = q; + q = q->next; + qsize--; + if (q == oldhead) + q = NULL; + } else if (!qsize || !q) { + e = p; + p = p->next; + psize--; + if (p == oldhead) + p = NULL; + } else if (cmp(p, q) <= 0) { + e = p; + p = p->next; + psize--; + if (p == oldhead) + p = NULL; + } else { + e = q; + q = q->next; + qsize--; + if (q == oldhead) + q = NULL; + } + if (tail) + tail->next = e; + else + list = e; + e->prev = tail; + tail = e; + } + p = q; + } + + tail->next = list; + list->prev = tail; + + if (nmerges <= 1) + break; + + insize *= 2; + } + + head->next = list; + head->prev = list->prev; + list->prev->next = head; + list->prev = head; +} + +void drm_mode_sort(struct list_head *mode_list) +{ + list_sort(mode_list, drm_mode_compare); +} diff --git a/linux-core/i915_drv.c b/linux-core/i915_drv.c index 7fdb083..b9e624f 100644 --- a/linux-core/i915_drv.c +++ b/linux-core/i915_drv.c @@ -79,6 +79,7 @@ static struct drm_driver driver = { DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL | DRIVER_IRQ_VBL2, .load = i915_driver_load, + .unload = i915_driver_unload, .firstopen = i915_driver_firstopen, .lastclose = i915_driver_lastclose, .preclose = i915_driver_preclose, diff --git a/linux-core/intel_crt.c b/linux-core/intel_crt.c new file mode 100644 index 0000000..5ff9f79 --- /dev/null +++ b/linux-core/intel_crt.c @@ -0,0 +1,226 @@ +#include +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +static void intel_crt_dpms(struct drm_output *output, int mode) +{ + drm_device_t *dev = output->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + u32 temp; + + temp = I915_READ(ADPA); + temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); + temp &= ~ADPA_DAC_ENABLE; + + switch(mode) { + case DPMSModeOn: + temp |= ADPA_DAC_ENABLE; + break; + case DPMSModeStandby: + temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE; + break; + case DPMSModeSuspend: + temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE; + break; + case DPMSModeOff: + temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; + break; + } + + I915_WRITE(ADPA, temp); +} + +static void intel_crt_save(struct drm_output *output) +{ + +} + +static void intel_crt_restore(struct drm_output *output) +{ + +} + +static int intel_crt_mode_valid(struct drm_output *output, + struct drm_display_mode *mode) +{ + if (mode->flags & V_DBLSCAN) + return MODE_NO_DBLESCAN; + + if (mode->clock > 400000 || mode->clock < 25000) + return MODE_CLOCK_RANGE; + + return MODE_OK; +} + +static bool intel_crt_mode_fixup(struct drm_output *output, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + +static void intel_crt_mode_set(struct drm_output *output, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + drm_device_t *dev = output->dev; + struct drm_crtc *crtc = output->crtc; + struct intel_crtc *intel_crtc = crtc->driver_private; + drm_i915_private_t *dev_priv = dev->dev_private; + int dpll_md_reg; + u32 adpa, dpll_md; + + if (intel_crtc->pipe == 0) + dpll_md_reg = DPLL_A_MD; + else + dpll_md_reg = DPLL_B_MD; + + /* + * Disable separate mode multiplier used when cloning SDVO to CRT + * XXX this needs to be adjusted when we really are cloning + */ + if (IS_I965G(dev)) + { + dpll_md = I915_READ(dpll_md_reg); + I915_WRITE(dpll_md_reg, dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); + } + + adpa = 0; + if (adjusted_mode->flags & V_PHSYNC) + adpa |= ADPA_HSYNC_ACTIVE_HIGH; + if (adjusted_mode->flags & V_PVSYNC) + adpa |= ADPA_VSYNC_ACTIVE_HIGH; + + if (intel_crtc->pipe == 0) + adpa |= ADPA_PIPE_A_SELECT; + else + adpa |= ADPA_PIPE_B_SELECT; + + I915_WRITE(ADPA, adpa); +} + +/** + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence. + * + * Only for I945G/GM. + * + * \return TRUE if CRT is connected. + * \return FALSE if CRT is disconnected. + */ +static bool intel_crt_detect_hotplug(struct drm_output *output) +{ + drm_device_t *dev = output->dev; +// struct intel_output *intel_output = output->driver_private; + drm_i915_private_t *dev_priv = dev->dev_private; + u32 temp; + const int timeout_ms = 1000; + int starttime, curtime; + + temp = I915_READ(PORT_HOTPLUG_EN); + + I915_WRITE(PORT_HOTPLUG_EN, temp | CRT_HOTPLUG_FORCE_DETECT | (1 << 5)); +#if 0 + for (curtime = starttime = GetTimeInMillis(); + (curtime - starttime) < timeout_ms; curtime = GetTimeInMillis()) + { + if ((I915_READ(PORT_HOTPLUG_EN) & CRT_HOTPLUG_FORCE_DETECT) == 0) + break; + } +#endif + if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) == + CRT_HOTPLUG_MONITOR_COLOR) + { + return true; + } else { + return false; + } +} + +static bool intel_crt_detect_ddc(struct drm_output *output) +{ + struct intel_output *intel_output = output->driver_private; + + /* CRT should always be at 0, but check anyway */ + if (intel_output->type != INTEL_OUTPUT_ANALOG) + return false; + + return intel_ddc_probe(output); +} + +static enum drm_output_status intel_crt_detect(struct drm_output *output) +{ + drm_device_t *dev = output->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + + if (IS_I945G(dev)| IS_I945GM(dev) || IS_I965G(dev)) { + if (intel_crt_detect_hotplug(output)) + return output_status_connected; + else + return output_status_disconnected; + } + + if (intel_crt_detect_ddc(output)) + return output_status_connected; + + /* TODO use load detect */ + return output_status_unknown; +} + +static void intel_crt_destroy(struct drm_output *output) +{ + struct intel_output *intel_output = output->driver_private; + + intel_i2c_destroy(intel_output->ddc_bus); + + if (output->driver_private) + kfree(output->driver_private); +} + +/* + * Routines for controlling stuff on the analog port + */ +static const struct drm_output_funcs intel_crt_output_funcs = { + .dpms = intel_crt_dpms, + .save = intel_crt_save, + .restore = intel_crt_restore, + .mode_valid = intel_crt_mode_valid, + .mode_fixup = intel_crt_mode_fixup, + .prepare = intel_output_prepare, + .mode_set = intel_crt_mode_set, + .commit = intel_output_commit, + .detect = intel_crt_detect, + .get_modes = intel_ddc_get_modes, + .cleanup = intel_crt_destroy, +}; + +void intel_crt_init(drm_device_t *dev) +{ + struct drm_output *output; + struct intel_output *intel_output; + int modes; + + output = drm_output_create (dev, &intel_crt_output_funcs, "VGA"); + + intel_output = kmalloc(sizeof(struct intel_output), GFP_KERNEL); + if (!intel_output) { + drm_output_destroy(output); + return; + } + + intel_output->type = INTEL_OUTPUT_ANALOG; + output->driver_private = intel_output; + output->interlace_allowed = 0; + output->doublescan_allowed = 0; + + /* Set up the DDC bus. */ + intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A"); + if (!intel_output->ddc_bus) { + dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " + "failed.\n"); + return; + } +} diff --git a/linux-core/intel_display.c b/linux-core/intel_display.c new file mode 100644 index 0000000..495f470 --- /dev/null +++ b/linux-core/intel_display.c @@ -0,0 +1,1087 @@ +#include +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +bool intel_pipe_has_type (struct drm_crtc *crtc, int type); + +typedef struct { + /* given values */ + int n; + int m1, m2; + int p1, p2; + /* derived values */ + int dot; + int vco; + int m; + int p; +} intel_clock_t; + +typedef struct { + int min, max; +} intel_range_t; + +typedef struct { + int dot_limit; + int p2_slow, p2_fast; +} intel_p2_t; + +#define INTEL_P2_NUM 2 + +typedef struct { + intel_range_t dot, vco, n, m, m1, m2, p, p1; + intel_p2_t p2; +} intel_limit_t; + +#define I8XX_DOT_MIN 25000 +#define I8XX_DOT_MAX 350000 +#define I8XX_VCO_MIN 930000 +#define I8XX_VCO_MAX 1400000 +#define I8XX_N_MIN 3 +#define I8XX_N_MAX 16 +#define I8XX_M_MIN 96 +#define I8XX_M_MAX 140 +#define I8XX_M1_MIN 18 +#define I8XX_M1_MAX 26 +#define I8XX_M2_MIN 6 +#define I8XX_M2_MAX 16 +#define I8XX_P_MIN 4 +#define I8XX_P_MAX 128 +#define I8XX_P1_MIN 2 +#define I8XX_P1_MAX 33 +#define I8XX_P1_LVDS_MIN 1 +#define I8XX_P1_LVDS_MAX 6 +#define I8XX_P2_SLOW 4 +#define I8XX_P2_FAST 2 +#define I8XX_P2_LVDS_SLOW 14 +#define I8XX_P2_LVDS_FAST 14 /* No fast option */ +#define I8XX_P2_SLOW_LIMIT 165000 + +#define I9XX_DOT_MIN 20000 +#define I9XX_DOT_MAX 400000 +#define I9XX_VCO_MIN 1400000 +#define I9XX_VCO_MAX 2800000 +#define I9XX_N_MIN 3 +#define I9XX_N_MAX 8 +#define I9XX_M_MIN 70 +#define I9XX_M_MAX 120 +#define I9XX_M1_MIN 10 +#define I9XX_M1_MAX 20 +#define I9XX_M2_MIN 5 +#define I9XX_M2_MAX 9 +#define I9XX_P_SDVO_DAC_MIN 5 +#define I9XX_P_SDVO_DAC_MAX 80 +#define I9XX_P_LVDS_MIN 7 +#define I9XX_P_LVDS_MAX 98 +#define I9XX_P1_MIN 1 +#define I9XX_P1_MAX 8 +#define I9XX_P2_SDVO_DAC_SLOW 10 +#define I9XX_P2_SDVO_DAC_FAST 5 +#define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000 +#define I9XX_P2_LVDS_SLOW 14 +#define I9XX_P2_LVDS_FAST 7 +#define I9XX_P2_LVDS_SLOW_LIMIT 112000 + +#define INTEL_LIMIT_I8XX_DVO_DAC 0 +#define INTEL_LIMIT_I8XX_LVDS 1 +#define INTEL_LIMIT_I9XX_SDVO_DAC 2 +#define INTEL_LIMIT_I9XX_LVDS 3 + +static const intel_limit_t intel_limits[] = { + { /* INTEL_LIMIT_I8XX_DVO_DAC */ + .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, + .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, + .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, + .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, + .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, + .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, + .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, + .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX }, + .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, + .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, + }, + { /* INTEL_LIMIT_I8XX_LVDS */ + .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, + .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, + .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, + .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, + .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, + .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, + .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, + .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX }, + .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, + .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, + }, + { /* INTEL_LIMIT_I9XX_SDVO_DAC */ + .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, + .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, + .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, + .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, + .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, + .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, + .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, + .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, + .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, + .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, + }, + { /* INTEL_LIMIT_I9XX_LVDS */ + .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, + .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, + .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, + .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, + .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, + .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, + .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX }, + .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, + /* The single-channel range is 25-112Mhz, and dual-channel + * is 80-224Mhz. Prefer single channel as much as possible. + */ + .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, + .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, + }, +}; + +static const intel_limit_t *intel_limit (struct drm_crtc *crtc) +{ + drm_device_t *dev = crtc->dev; + const intel_limit_t *limit; + + if (IS_I9XX(dev)) { + if (intel_pipe_has_type (crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS]; + else + limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + } else { + if (intel_pipe_has_type (crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS]; + else + limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC]; + } + return limit; +} + +/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ + +static void i8xx_clock(int refclk, intel_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ + +static void i9xx_clock(int refclk, intel_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +static void intel_clock(struct drm_device *dev, int refclk, + intel_clock_t *clock) +{ + if (IS_I9XX(dev)) + return i9xx_clock (refclk, clock); + else + return i8xx_clock (refclk, clock); +} + +/** + * Returns whether any output on the specified pipe is of the specified type + */ +bool intel_pipe_has_type (struct drm_crtc *crtc, int type) +{ + struct drm_device *dev = crtc->dev; + struct drm_crtc_config *crtc_config = &dev->crtc_config; + struct drm_output *l_entry; + + list_for_each_entry(l_entry, &crtc_config->output_list, head) { + if (l_entry->crtc == crtc) { + struct intel_output *intel_output = l_entry->driver_private; + if (intel_output->type == type) + return true; + } + } + return false; +} + +#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } +/** + * Returns whether the given set of divisors are valid for a given refclk with + * the given outputs. + */ + +static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock) +{ + const intel_limit_t *limit = intel_limit (crtc); + + if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) + INTELPllInvalid ("p1 out of range\n"); + if (clock->p < limit->p.min || limit->p.max < clock->p) + INTELPllInvalid ("p out of range\n"); + if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) + INTELPllInvalid ("m2 out of range\n"); + if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) + INTELPllInvalid ("m1 out of range\n"); + if (clock->m1 <= clock->m2) + INTELPllInvalid ("m1 <= m2\n"); + if (clock->m < limit->m.min || limit->m.max < clock->m) + INTELPllInvalid ("m out of range\n"); + if (clock->n < limit->n.min || limit->n.max < clock->n) + INTELPllInvalid ("n out of range\n"); + if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) + INTELPllInvalid ("vco out of range\n"); + /* XXX: We may need to be checking "Dot clock" depending on the multiplier, + * output, etc., rather than just a single range. + */ + if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) + INTELPllInvalid ("dot out of range\n"); + + return true; +} + +/** + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. The returned values represent the clock equation: + * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. + */ +static bool intel_find_best_PLL(struct drm_crtc *crtc, int target, + int refclk, intel_clock_t *best_clock) +{ + drm_device_t *dev = crtc->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + intel_clock_t clock; + const intel_limit_t *limit = intel_limit (crtc); + int err = target; + + if (IS_I9XX(dev)& intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + (I915_READ(LVDS) & LVDS_PORT_EN) != 0) + { + /* For LVDS, if the panel is on, just rely on its current settings for + * dual-channel. We haven't figured out how to reliably set up + * different single/dual channel state, if we even can. + */ + if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) + clock.p2 = limit->p2.p2_fast; + else + clock.p2 = limit->p2.p2_slow; + } else { + if (target < limit->p2.dot_limit) + clock.p2 = limit->p2.p2_slow; + else + clock.p2 = limit->p2.p2_fast; + } + + memset (best_clock, 0, sizeof (*best_clock)); + + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) + { + for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 && clock.m2 <= limit->m2.max; clock.m2++) + { + for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) + { + for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; clock.p1++) + { + int this_err; + + intel_clock (dev, refclk, &clock); + + if (!intel_PLL_is_valid(crtc, &clock)) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + } + } + return (err != target); +} + +void +intel_wait_for_vblank(drm_device_t *dev) +{ + /* Wait for 20ms, i.e. one cycle at 50hz. */ + udelay(20000); +} + +void +intel_pipe_set_base(struct drm_crtc *crtc, int x, int y) +{ + drm_device_t *dev = crtc->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = crtc->driver_private; + int pipe = intel_crtc->pipe; + unsigned long Start, Offset; + int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE); + int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); + + Start = crtc->fb->offset; + Offset = ((y * crtc->fb->width + x) * (crtc->fb->bits_per_pixel / 8)); + + if (IS_I965G(dev)) { + I915_WRITE(dspbase, Offset); + I915_READ(dspbase); + I915_WRITE(dspsurf, Start); + I915_READ(dspsurf); + } else { + I915_WRITE(dspbase, Start + Offset); + I915_READ(dspbase); + } + + +#if 0 + drmI830Sarea *sPriv = (drmI830Sarea *) DRIGetSAREAPrivate(pScrn->pScreen); + + if (!sPriv) + return; + + switch (pipe) { + case 0: + sPriv->pipeA_x = x; + sPriv->pipeA_y = y; + break; + case 1: + sPriv->pipeB_x = x; + sPriv->pipeB_y = y; + break; + default: + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "Can't update pipe %d in SAREA\n", pipe); + break; + } +#endif +} + +/** + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + drm_device_t *dev = crtc->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = crtc->driver_private; + int pipe = intel_crtc->pipe; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + u32 temp; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DPMSModeOff in the CRTC. + */ + switch (mode) { + case DPMSModeOn: + case DPMSModeStandby: + case DPMSModeSuspend: + /* Enable the DPLL */ + temp = I915_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) == 0) + { + I915_WRITE(dpll_reg, temp); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + + /* Enable the pipe */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) == 0) + I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); + + /* Enable the plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) + { + I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + } + + intel_crtc_load_lut(crtc); + + /* Give the overlay scaler a chance to enable if it's on this pipe */ + //intel_crtc_dpms_video(crtc, TRUE); TODO + break; + case DPMSModeOff: + /* Give the overlay scaler a chance to disable if it's on this pipe */ + //intel_crtc_dpms_video(crtc, FALSE); TODO + + /* Disable the VGA plane that we never use */ + I915_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* Disable display plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) + { + I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + I915_READ(dspbase_reg); + } + + if (!IS_I9XX(dev)) { + /* Wait for vblank for the disable to take effect */ + intel_wait_for_vblank(dev); + } + + /* Next, disable display pipes */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) != 0) { + I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); + I915_READ(pipeconf_reg); + } + + /* Wait for vblank for the disable to take effect. */ + intel_wait_for_vblank(dev); + + temp = I915_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) != 0) { + I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + break; + } + +#if 0 //TODO + if (pI830->directRenderingEnabled) { + drmI830Sarea *sPriv = (drmI830Sarea *) DRIGetSAREAPrivate(pScrn->pScreen); + Bool enabled = crtc->enabled && mode != DPMSModeOff; + + if (!sPriv) + return; + + switch (pipe) { + case 0: + sPriv->pipeA_w = enabled ? crtc->mode.HDisplay : 0; + sPriv->pipeA_h = enabled ? crtc->mode.VDisplay : 0; + break; + case 1: + sPriv->pipeB_w = enabled ? crtc->mode.HDisplay : 0; + sPriv->pipeB_h = enabled ? crtc->mode.VDisplay : 0; + break; + default: + xf86DrvMsg(pScrn->scrnIndex, X_ERROR, + "Can't update pipe %d in SAREA\n", pipe); + break; + } + } +#endif +} + +static bool intel_crtc_lock(struct drm_crtc *crtc) +{ + /* Sync the engine before mode switch */ +// i830WaitSync(crtc->scrn); + +#if 0 // TODO def XF86DRI + return I830DRILock(crtc->scrn); +#else + return FALSE; +#endif +} + +static void intel_crtc_unlock (struct drm_crtc *crtc) +{ +#if 0 // TODO def XF86DRI + I830DRIUnlock (crtc->scrn); +#endif +} + +static void intel_crtc_prepare (struct drm_crtc *crtc) +{ + crtc->funcs->dpms (crtc, DPMSModeOff); +} + +static void intel_crtc_commit (struct drm_crtc *crtc) +{ + crtc->funcs->dpms (crtc, DPMSModeOn); +// if (crtc->scrn->pScreen != NULL) +// xf86_reload_cursors (crtc->scrn->pScreen); +} + +void intel_output_prepare (struct drm_output *output) +{ + output->funcs->dpms (output, DPMSModeOff); +} + +void intel_output_commit (struct drm_output *output) +{ + output->funcs->dpms (output, DPMSModeOn); +} + +static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + + +/** Returns the core display clock speed for i830 - i945 */ +static int intel_get_core_clock_speed(drm_device_t *dev) +{ + + /* Core clock values taken from the published datasheets. + * The 830 may go up to 166 Mhz, which we should check. + */ + if (IS_I945G(dev)) + return 400000; + else if (IS_I915G(dev)) + return 333000; + else if (IS_I945GM(dev) || IS_845G(dev)) + return 200000; + else if (IS_I915GM(dev)) { +#if 0 + u16 gcfgc = pciReadWord(dev->PciTag, I915_GCFGC); + + if (gcfgc & I915_LOW_FREQUENCY_ENABLE) + return 133000; + else { + switch (gcfgc & I915_DISPLAY_CLOCK_MASK) { + case I915_DISPLAY_CLOCK_333_MHZ: + return 333000; + default: + case I915_DISPLAY_CLOCK_190_200_MHZ: + return 190000; + } + } +#endif + } else if (IS_I865G(dev)) + return 266000; + else if (IS_I855(dev)) { +#if 0 + PCITAG bridge = pciTag(0, 0, 0); /* This is always the host bridge */ + u16 hpllcc = pciReadWord(bridge, I855_HPLLCC); + +#endif + u16 hpllcc = 0; + /* Assume that the hardware is in the high speed state. This + * should be the default. + */ + switch (hpllcc & I855_CLOCK_CONTROL_MASK) { + case I855_CLOCK_133_200: + case I855_CLOCK_100_200: + return 200000; + case I855_CLOCK_166_250: + return 250000; + case I855_CLOCK_100_133: + return 133000; + } + } else /* 852, 830 */ + return 133000; + + return 0; /* Silence gcc warning */ +} + + +/** + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int intel_panel_fitter_pipe (drm_device_t *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + u32 pfit_control; + + /* i830 doesn't have a panel fitter */ + if (IS_I830(dev)) + return -1; + + pfit_control = I915_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + + /* 965 can place panel fitter on either pipe */ + if (IS_I965G(dev)) + return (pfit_control >> 29) & 0x3; + + /* older chips can only use pipe 1 */ + return 1; +} + +static void intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y) +{ + drm_device_t *dev = crtc->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = crtc->driver_private; + int pipe = intel_crtc->pipe; + int fp_reg = (pipe == 0) ? FPA0 : FPB0; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; + int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; + int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; + int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; + int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; + int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; + int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; + int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; + int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; + int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + int refclk; + intel_clock_t clock; + u32 dpll = 0, fp = 0, dspcntr, pipeconf; + bool ok, is_sdvo = false, is_dvo = false; + bool is_crt = false, is_lvds = false, is_tv = false; + struct drm_crtc_config *crtc_config = &dev->crtc_config; + struct drm_output *output; + + list_for_each_entry(output, &crtc_config->output_list, head) { + struct intel_output *intel_output = output->driver_private; + + if (output->crtc != crtc) + continue; + + switch (intel_output->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = TRUE; + break; + case INTEL_OUTPUT_SDVO: + is_sdvo = TRUE; + break; + case INTEL_OUTPUT_DVO: + is_dvo = TRUE; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = TRUE; + break; + case INTEL_OUTPUT_ANALOG: + is_crt = TRUE; + break; + } + } + + if (IS_I9XX(dev)) { + refclk = 96000; + } else { + refclk = 48000; + } + + ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock); + if (!ok) { + DRM_ERROR("Couldn't find PLL settings for mode!\n"); + return; + } + + fp = clock.n << 16 | clock.m1 << 8 | clock.m2; + + dpll = DPLL_VGA_MODE_DIS; + if (IS_I9XX(dev)) { + if (is_lvds) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + if (is_sdvo) + { + dpll |= DPLL_DVO_HIGH_SPEED; + if (IS_I945G(dev) || IS_I945GM(dev)) + { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + } + + /* compute bitmask from p1 value */ + dpll |= (1 << (clock.p1 - 1)) << 16; + switch (clock.p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + if (IS_I965G(dev)) + dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); + } else { + if (is_lvds) { + dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + } else { + if (clock.p1 == 2) + dpll |= PLL_P1_DIVIDE_BY_TWO; + else + dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; + if (clock.p2 == 4) + dpll |= PLL_P2_DIVIDE_BY_4; + } + } + + if (is_tv) + { + /* XXX: just matching BIOS for now */ +/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + } +#if 0 + else if (is_lvds) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; +#endif + else + dpll |= PLL_REF_INPUT_DREFCLK; + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + switch (crtc->fb->bits_per_pixel) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (crtc->fb->depth == 15) + dspcntr |= DISPPLANE_15_16BPP; + else + dspcntr |= DISPPLANE_16BPP; + break; + case 32: + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + break; + default: + DRM_ERROR("Unknown color depth\n"); + return; + } + + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + pipeconf = I915_READ(pipeconf_reg); + if (pipe == 0 && !IS_I965G(dev)) + { + /* Enable pixel doubling when the dot clock is > 90% of the (display) + * core speed. + * + * XXX: No double-wide on 915GM pipe B. Is that the only reason for the + * pipe == 0 check? + */ + if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10) + pipeconf |= PIPEACONF_DOUBLE_WIDE; + else + pipeconf &= ~PIPEACONF_DOUBLE_WIDE; + } + + dspcntr |= DISPLAY_PLANE_ENABLE; + pipeconf |= PIPEACONF_ENABLE; + dpll |= DPLL_VCO_ENABLE; + + + /* Disable the panel fitter if it was on our pipe */ + if (intel_panel_fitter_pipe(dev) == pipe) + I915_WRITE(PFIT_CONTROL, 0); + +#if 0 + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); + xf86PrintModeline(pScrn->scrnIndex, mode); + if (!xf86ModesEqual(mode, adjusted_mode)) { + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Adjusted mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); + xf86PrintModeline(pScrn->scrnIndex, mode); + } + i830PrintPll("chosen", &clock); +#endif + + if (dpll & DPLL_VCO_ENABLE) + { + I915_WRITE(fp_reg, fp); + I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + udelay(150); + } + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (is_lvds) + { + u32 lvds = I915_READ(LVDS); + + lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock.p2 == 7) + lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + + I915_WRITE(LVDS, lvds); + I915_READ(LVDS); + } + + I915_WRITE(fp_reg, fp); + I915_WRITE(dpll_reg, dpll); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + if (IS_I965G(dev)) { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | + ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); + } else { + /* write it again -- the BIOS does, after all */ + I915_WRITE(dpll_reg, dpll); + } + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + I915_WRITE(dspstride_reg, crtc->fb->pitch * (crtc->fb->bits_per_pixel / 8)); + /* pipesrc and dspsize control the size that is scaled from, which should + * always be the user's requested size. + */ + I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); + I915_WRITE(dsppos_reg, 0); + I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + I915_WRITE(pipeconf_reg, pipeconf); + I915_READ(pipeconf_reg); + + intel_wait_for_vblank(dev); + + I915_WRITE(dspcntr_reg, dspcntr); + + /* Flush the plane changes */ + intel_pipe_set_base(crtc, x, y); + +#ifdef XF86DRI // TODO +// I830DRISetVBlankInterrupt (pScrn, TRUE); +#endif + + intel_wait_for_vblank(dev); + + +} + +/** Loads the palette/gamma unit for the CRTC with the prepared values */ +void intel_crtc_load_lut(struct drm_crtc *crtc) +{ + drm_device_t *dev = crtc->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = crtc->driver_private; + int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B; + int i; + + /* The clocks have to be on to load the palette. */ + if (!crtc->enabled) + return; + + for (i = 0; i < 256; i++) { + I915_WRITE(palreg + 4 * i, + (intel_crtc->lut_r[i] << 16) | + (intel_crtc->lut_g[i] << 8) | + intel_crtc->lut_b[i]); + } +} + +/** Sets the color ramps on behalf of RandR */ +static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, + u16 *blue, int size) +{ + struct intel_crtc *intel_crtc = crtc->driver_private; + int i; + + for (i = 0; i < 256; i++) { + intel_crtc->lut_r[i] = red[i] >> 8; + intel_crtc->lut_g[i] = green[i] >> 8; + intel_crtc->lut_b[i] = blue[i] >> 8; + } + + intel_crtc_load_lut(crtc); +} + +struct drm_display_mode *intel_crtc_mode_get(drm_device_t *dev, + struct drm_crtc *crtc) +{ + return NULL; +} + +static const struct drm_crtc_funcs intel_crtc_funcs = { + .dpms = intel_crtc_dpms, + .lock = intel_crtc_lock, + .unlock = intel_crtc_unlock, + .mode_fixup = intel_crtc_mode_fixup, + .mode_set = intel_crtc_mode_set, + .gamma_set = intel_crtc_gamma_set, + .prepare = intel_crtc_prepare, + .commit = intel_crtc_commit, +}; + + +void intel_crtc_init(drm_device_t *dev, int pipe) +{ + struct drm_crtc *crtc; + struct intel_crtc *intel_crtc; + int i; + + crtc = drm_crtc_create(dev, &intel_crtc_funcs); + if (crtc == NULL) + return; + + intel_crtc = kmalloc(sizeof(struct intel_crtc), GFP_KERNEL); + if (intel_crtc == NULL) { + kfree(crtc); + return; + } + + intel_crtc->pipe = pipe; + for (i = 0; i < 256; i++) { + intel_crtc->lut_r[i] = i; + intel_crtc->lut_g[i] = i; + intel_crtc->lut_b[i] = i; + } + + crtc->driver_private = intel_crtc; +} + +int intel_output_clones (drm_device_t *dev, int type_mask) +{ + int index_mask = 0; + struct drm_output *output; + int entry = 0; + + list_for_each_entry(output, &dev->crtc_config.output_list, head) { + struct intel_output *intel_output = output->driver_private; + if (type_mask & (1 << intel_output->type)) + index_mask |= (1 << entry); + entry++; + } + return index_mask; +} + + +static void intel_setup_outputs(drm_device_t *dev) +{ + struct drm_output *output; + + intel_crt_init(dev); + + /* Set up integrated LVDS */ + if (IS_MOBILE(dev) && !IS_I830(dev)) + intel_lvds_init(dev); + + if (IS_I9XX(dev)) { + intel_sdvo_init(dev, SDVOB); + intel_sdvo_init(dev, SDVOC); + } + + list_for_each_entry(output, &dev->crtc_config.output_list, head) { + struct intel_output *intel_output = output->driver_private; + int crtc_mask = 0, clone_mask = 0; + + /* valid crtcs */ + switch(intel_output->type) { + case INTEL_OUTPUT_DVO: + case INTEL_OUTPUT_SDVO: + crtc_mask = ((1 << 0)| + (1 << 1)); + clone_mask = ((1 << INTEL_OUTPUT_ANALOG) | + (1 << INTEL_OUTPUT_DVO) | + (1 << INTEL_OUTPUT_SDVO)); + break; + case INTEL_OUTPUT_ANALOG: + crtc_mask = ((1 << 0)); + clone_mask = ((1 << INTEL_OUTPUT_ANALOG) | + (1 << INTEL_OUTPUT_DVO) | + (1 << INTEL_OUTPUT_SDVO)); + break; + case INTEL_OUTPUT_LVDS: + crtc_mask = (1 << 1); + clone_mask = (1 << INTEL_OUTPUT_LVDS); + break; + case INTEL_OUTPUT_TVOUT: + crtc_mask = ((1 << 0) | + (1 << 1)); + clone_mask = (1 << INTEL_OUTPUT_TVOUT); + break; + } + output->possible_crtcs = crtc_mask; + output->possible_clones = intel_output_clones(dev, clone_mask); + } +} + +void intel_modeset_init(drm_device_t *dev) +{ + int num_pipe; + int i; + + drm_crtc_config_init(dev); + + + if (IS_MOBILE(dev) || IS_I9XX(dev)) + num_pipe = 2; + else + num_pipe = 1; + DRM_DEBUG("%d display pipe%s available.\n", + num_pipe, num_pipe > 1 ? "s" : ""); + + for (i = 0; i < num_pipe; i++) { + intel_crtc_init(dev, i); + } + + intel_setup_outputs(dev); + + drm_initial_config(dev, false); +} + +void intel_modeset_cleanup(drm_device_t *dev) +{ + drm_crtc_config_cleanup(dev); +} diff --git a/linux-core/intel_drv.h b/linux-core/intel_drv.h new file mode 100644 index 0000000..5b8bef6 --- /dev/null +++ b/linux-core/intel_drv.h @@ -0,0 +1,69 @@ +#ifndef __INTEL_DRV_H__ +#define __INTEL_DRV_H__ + +#include +#include +#include +#include "drm_crtc.h" + +/* + * Display related stuff + */ + +/* store information about an Ixxx DVO */ +/* The i830->i865 use multiple DVOs with multiple i2cs */ +/* the i915, i945 have a single sDVO i2c bus - which is different */ +#define MAX_OUTPUTS 6 + +#define INTEL_I2C_BUS_DVO 1 +#define INTEL_I2C_BUS_SDVO 2 + +/* these are outputs from the chip - integrated only + external chips are via DVO or SDVO output */ +#define INTEL_OUTPUT_UNUSED 0 +#define INTEL_OUTPUT_ANALOG 1 +#define INTEL_OUTPUT_DVO 2 +#define INTEL_OUTPUT_SDVO 3 +#define INTEL_OUTPUT_LVDS 4 +#define INTEL_OUTPUT_TVOUT 5 + +#define INTEL_DVO_CHIP_NONE 0 +#define INTEL_DVO_CHIP_LVDS 1 +#define INTEL_DVO_CHIP_TMDS 2 +#define INTEL_DVO_CHIP_TVOUT 4 + +struct intel_i2c_chan { + drm_device_t *drm_dev; /* for getting at dev. private (mmio etc.) */ + u32 reg; /* GPIO reg */ + struct i2c_adapter adapter; + struct i2c_algo_bit_data algo; + u8 slave_addr; +}; + +struct intel_output { + int type; + struct intel_i2c_chan *i2c_bus; /* for control functions */ + struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */ + bool load_detect_tmp; + void *dev_priv; +}; + +struct intel_crtc { + int pipe; + u8 lut_r[256], lut_g[256], lut_b[256]; +}; + +struct intel_i2c_chan *intel_i2c_create(drm_device_t *dev, const u32 reg, + const char *name); +void intel_i2c_destroy(struct intel_i2c_chan *chan); +int intel_ddc_get_modes(struct drm_output *output); +extern bool intel_ddc_probe(struct drm_output *output); + +extern void intel_crt_init(drm_device_t *dev); +extern void intel_sdvo_init(drm_device_t *dev, int output_device); +extern void intel_lvds_init(drm_device_t *dev); + +extern void intel_crtc_load_lut(struct drm_crtc *crtc); +extern void intel_output_prepare (struct drm_output *output); +extern void intel_output_commit (struct drm_output *output); +#endif /* __INTEL_DRV_H__ */ diff --git a/linux-core/intel_i2c.c b/linux-core/intel_i2c.c new file mode 100644 index 0000000..acae28a --- /dev/null +++ b/linux-core/intel_i2c.c @@ -0,0 +1,164 @@ +/* + * Copyright 2006 Dave Airlie + * Copyright © 2006 Intel Corporation + * Eric Anholt + * Jesse Barnes + */ + +#include +#include +#include +#include "drmP.h" +#include "drm.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +/* + * Intel GPIO access functions + */ + +#define I2C_RISEFALL_TIME 20 + +static int get_clock(void *data) +{ + struct intel_i2c_chan *chan = data; + drm_i915_private_t *dev_priv = chan->drm_dev->dev_private; + u32 val; + + val = I915_READ(chan->reg); + return ((val & GPIO_CLOCK_VAL_IN) != 0); +} + +static int get_data(void *data) +{ + struct intel_i2c_chan *chan = data; + drm_i915_private_t *dev_priv = chan->drm_dev->dev_private; + u32 val; + + val = I915_READ(chan->reg); + return ((val & GPIO_DATA_VAL_IN) != 0); +} + +static void set_clock(void *data, int state_high) +{ + struct intel_i2c_chan *chan = data; + drm_device_t *dev = chan->drm_dev; + drm_i915_private_t *dev_priv = chan->drm_dev->dev_private; + u32 reserved = 0, clock_bits; + + /* On most chips, these bits must be preserved in software. */ + if (!IS_I830(dev) && !IS_845G(dev)) + reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | + GPIO_CLOCK_PULLUP_DISABLE); + + if (state_high) + clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK; + else + clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK | + GPIO_CLOCK_VAL_MASK; + I915_WRITE(chan->reg, reserved | clock_bits); + udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ +} + +static void set_data(void *data, int state_high) +{ + struct intel_i2c_chan *chan = data; + drm_device_t *dev = chan->drm_dev; + drm_i915_private_t *dev_priv = chan->drm_dev->dev_private; + u32 reserved = 0, data_bits; + + /* On most chips, these bits must be preserved in software. */ + if (!IS_I830(dev) && !IS_845G(dev)) + reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | + GPIO_CLOCK_PULLUP_DISABLE); + + if (state_high) + data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; + else + data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK | + GPIO_DATA_VAL_MASK; + + I915_WRITE(chan->reg, reserved | data_bits); + udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ +} + +/** + * intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg + * @dev: DRM device + * @output: driver specific output device + * @reg: GPIO reg to use + * @name: name for this bus + * + * Creates and registers a new i2c bus with the Linux i2c layer, for use + * in output probing and control (e.g. DDC or SDVO control functions). + * + * Possible values for @reg include: + * %GPIOA + * %GPIOB + * %GPIOC + * %GPIOD + * %GPIOE + * %GPIOF + * %GPIOG + * %GPIOH + * see PRM for details on how these different busses are used. + */ +struct intel_i2c_chan *intel_i2c_create(drm_device_t *dev, const u32 reg, + const char *name) +{ + struct intel_i2c_chan *chan; + + chan = kzalloc(sizeof(struct intel_i2c_chan), GFP_KERNEL); + if (!chan) + goto out_free; + + chan->drm_dev = dev; + chan->reg = reg; + snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name); + chan->adapter.owner = THIS_MODULE; + chan->adapter.id = I2C_HW_B_INTELFB; + chan->adapter.algo_data = &chan->algo; + chan->adapter.dev.parent = &dev->pdev->dev; + chan->algo.setsda = set_data; + chan->algo.setscl = set_clock; + chan->algo.getsda = get_data; + chan->algo.getscl = get_clock; + chan->algo.udelay = 20; + chan->algo.timeout = usecs_to_jiffies(2200); + chan->algo.data = chan; + + i2c_set_adapdata(&chan->adapter, chan); + + if(i2c_bit_add_bus(&chan->adapter)) + goto out_free; + + /* JJJ: raise SCL and SDA? */ + set_data(chan, 1); + set_clock(chan, 1); + udelay(20); + + return chan; + +out_free: + kfree(chan); + return NULL; +} + +/** + * intel_i2c_destroy - unregister and free i2c bus resources + * @output: channel to free + * + * Unregister the adapter from the i2c layer, then free the structure. + */ +void intel_i2c_destroy(struct intel_i2c_chan *chan) +{ + if (!chan) + return; + + i2c_del_adapter(&chan->adapter); + kfree(chan); +} + + + diff --git a/linux-core/intel_lvds.c b/linux-core/intel_lvds.c new file mode 100644 index 0000000..c2ac567 --- /dev/null +++ b/linux-core/intel_lvds.c @@ -0,0 +1,108 @@ +/* + * Copyright 2006 Dave Airlie + * Copyright © 2006 Intel Corporation + * Eric Anholt + * Jesse Barnes + */ + +#include +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +/** + * Sets the backlight level. + * + * \param level backlight level, from 0 to i830_lvds_get_max_backlight(). + */ +static void lvds_set_backlight(drm_device_t *dev, u32 level) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + unsigned long blc_pwm_ctl; + + level &= BACKLIGHT_DUTY_CYCLE_MASK; + blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; + I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); +} + +/** + * Returns the maximum level of the backlight duty cycle field. + */ +static u32 lvds_get_max_backlight(drm_device_t *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; +} + +int lvds_backlight(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + unsigned long dvoa_enabled, dvob_enabled, dvoc_enabled, lvds_enabled; + drm_i915_private_t *dev_priv = dev->dev_private; + + printk(KERN_ERR "max backlight value: %d\n", + lvds_get_max_backlight(dev)); + dvoa_enabled = I915_READ(DVOA); + dvob_enabled = I915_READ(DVOB); + dvoc_enabled = I915_READ(DVOC); + lvds_enabled = I915_READ(LVDS); + + printk(KERN_ERR "dvoa_enabled: 0x%08lx\n", dvoa_enabled); + printk(KERN_ERR "dvob_enabled: 0x%08lx\n", dvob_enabled); + printk(KERN_ERR "dvoc_enabled: 0x%08lx\n", dvoc_enabled); + printk(KERN_ERR "lvds_enabled: 0x%08lx\n", lvds_enabled); + printk(KERN_ERR "BLC_PWM_CTL: 0x%08x\n", I915_READ(BLC_PWM_CTL)); + + return 0; +} + +static const struct drm_output_funcs intel_lvds_output_funcs; + +/** + * intel_lvds_init - setup LVDS outputs on this device + * @dev: drm device + * + * Create the output, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void intel_lvds_init(drm_device_t *dev) +{ + struct drm_output *output; + struct intel_output *intel_output; + int modes; + + output = drm_output_create(dev, &intel_lvds_output_funcs, "LVDS"); + if (!output) + return; + + intel_output = kmalloc(sizeof(struct intel_output), GFP_KERNEL); + if (!intel_output) { + drm_output_destroy(output); + return; + } + + intel_output->type = INTEL_OUTPUT_LVDS; + output->driver_private = intel_output; + output->subpixel_order = SubPixelHorizontalRGB; + output->interlace_allowed = 0; + output->doublescan_allowed = 0; + + intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C"); + if (!intel_output->ddc_bus) { + dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " + "failed.\n"); + return; + } + + modes = intel_ddc_get_modes(output); + printk(KERN_ERR "LVDS: added %d modes from EDID.\n", modes); + intel_i2c_destroy(intel_output->ddc_bus); + drm_output_destroy(output); +} + diff --git a/linux-core/intel_modes.c b/linux-core/intel_modes.c new file mode 100644 index 0000000..0e56147 --- /dev/null +++ b/linux-core/intel_modes.c @@ -0,0 +1,49 @@ +#include +#include +#include "drmP.h" +#include "intel_drv.h" + +/** + * intel_ddc_probe + * + */ +bool intel_ddc_probe(struct drm_output *output) +{ + struct intel_output *intel_output = output->driver_private; + u8 out_buf[] = { 0x0, 0x0}; + u8 buf[2]; + int ret; + struct i2c_msg msgs[] = { + { + .addr = 0x50, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = 0x50, + .flags = I2C_M_RD, + .len = 1, + .buf = buf, + } + }; + + ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2); + if (ret == 2) + return true; + + return false; +} + +/** + * intel_ddc_get_modes - get modelist from monitor + * @output: DRM output device to use + * + * Fetch the EDID information from @output using the DDC bus. + */ +int intel_ddc_get_modes(struct drm_output *output) +{ + struct intel_output *intel_output = output->driver_private; + + return drm_add_edid_modes(output, &intel_output->ddc_bus->adapter); +} diff --git a/linux-core/intel_sdvo.c b/linux-core/intel_sdvo.c new file mode 100644 index 0000000..4094b78 --- /dev/null +++ b/linux-core/intel_sdvo.c @@ -0,0 +1,999 @@ +/* + * Copyright 2006 Dave Airlie + * Copyright © 2006 Intel Corporation + * Eric Anholt + * Jesse Barnes + */ + +#include +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "intel_sdvo_regs.h" + +struct intel_sdvo_priv { + struct intel_i2c_chan *i2c_bus; + int slaveaddr; + int output_device; + + u16 active_outputs; + + struct intel_sdvo_caps caps; + int pixel_clock_min, pixel_clock_max; + + int save_sdvo_mult; + u16 save_active_outputs; + struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2; + struct intel_sdvo_dtd save_output_dtd[16]; + u32 save_SDVOX; +}; + +/** + * Writes the SDVOB or SDVOC with the given value, but always writes both + * SDVOB and SDVOC to work around apparent hardware issues (according to + * comments in the BIOS). + */ +static void intel_sdvo_write_sdvox(struct drm_output *output, u32 val) +{ + drm_device_t *dev = output->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_output *intel_output = output->driver_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u32 bval = val, cval = val; + int i; + + if (sdvo_priv->output_device == SDVOB) + cval = I915_READ(SDVOC); + else + bval = I915_READ(SDVOB); + + /* + * Write the registers twice for luck. Sometimes, + * writing them only once doesn't appear to 'stick'. + * The BIOS does this too. Yay, magic + */ + for (i = 0; i < 2; i++) + { + I915_WRITE(SDVOB, bval); + I915_READ(SDVOB); + I915_WRITE(SDVOC, cval); + I915_READ(SDVOC); + } +} + +static bool intel_sdvo_read_byte(struct drm_output *output, u8 addr, + u8 *ch) +{ + struct intel_output *intel_output = output->driver_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u8 out_buf[2]; + u8 buf[2]; + int ret; + + struct i2c_msg msgs[] = { + { + .addr = sdvo_priv->i2c_bus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = sdvo_priv->i2c_bus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2) + { +// DRM_DEBUG("got back from addr %02X = %02x\n", out_buf[0], buf[0]); + *ch = buf[0]; + return true; + } + + DRM_DEBUG("i2c transfer returned %d\n", ret); + return false; +} + + +static bool intel_sdvo_read_byte_quiet(struct drm_output *output, int addr, + u8 *ch) +{ + return true; + +} + +static bool intel_sdvo_write_byte(struct drm_output *output, int addr, + u8 ch) +{ + struct intel_output *intel_output = output->driver_private; + u8 out_buf[2]; + struct i2c_msg msgs[] = { + { + .addr = intel_output->i2c_bus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1) + { + return true; + } + return false; +} + +#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} +/** Mapping of command numbers to names, for debug output */ +const static struct _sdvo_cmd_name { + u8 cmd; + char *name; +} sdvo_cmd_names[] = { + SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH), +}; + +#define SDVO_NAME(dev_priv) ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC") +#define SDVO_PRIV(output) ((struct intel_sdvo_priv *) (output)->dev_priv) + +static void intel_sdvo_write_cmd(struct drm_output *output, u8 cmd, + void *args, int args_len) +{ + struct intel_output *intel_output = output->driver_private; + int i; + + for (i = 0; i < args_len; i++) { + intel_sdvo_write_byte(output, SDVO_I2C_ARG_0 - i, ((u8*)args)[i]); + } + intel_sdvo_write_byte(output, SDVO_I2C_OPCODE, cmd); +} + +static const char *cmd_status_names[] = { + "Power on", + "Success", + "Not supported", + "Invalid arg", + "Pending", + "Target not specified", + "Scaling not supported" +}; + +static u8 intel_sdvo_read_response(struct drm_output *output, void *response, + int response_len) +{ + int i; + u8 status; + + /* Read the command response */ + for (i = 0; i < response_len; i++) { + intel_sdvo_read_byte(output, SDVO_I2C_RETURN_0 + i, + &((u8 *)response)[i]); + } + + /* read the return status */ + intel_sdvo_read_byte(output, SDVO_I2C_CMD_STATUS, &status); + + return status; + +} + +int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) +{ + if (mode->clock >= 100000) + return 1; + else if (mode->clock >= 50000) + return 2; + else + return 4; +} + +static void intel_sdvo_set_control_bus_switch(struct drm_output *output, u8 target) +{ + intel_sdvo_write_cmd(output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1); +} + +static bool intel_sdvo_set_target_input(struct drm_output *output, bool target_0, bool target_1) +{ + struct intel_sdvo_set_target_input_args targets = {0}; + u8 status; + + if (target_0 && target_1) + return SDVO_CMD_STATUS_NOTSUPP; + + if (target_1) + targets.target_1 = 1; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_TARGET_INPUT, &targets, + sizeof(targets)); + + status = intel_sdvo_read_response(output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +/** + * Return whether each input is trained. + * + * This function is making an assumption about the layout of the response, + * which should be checked against the docs. + */ +static bool intel_sdvo_get_trained_inputs(struct drm_output *output, bool *input_1, bool *input_2) +{ + struct intel_sdvo_get_trained_inputs_response response; + u8 status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_TRAINED_INPUTS, NULL, 0); + status = intel_sdvo_read_response(output, &response, sizeof(response)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + *input_1 = response.input0_trained; + *input_2 = response.input1_trained; + return TRUE; +} + +static bool intel_sdvo_get_active_outputs(struct drm_output *output, + u16 *outputs) +{ + u8 status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_ACTIVE_OUTPUTS, NULL, 0); + status = intel_sdvo_read_response(output, outputs, sizeof(*outputs)); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_set_active_outputs(struct drm_output *output, + u16 outputs) +{ + u8 status; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_ACTIVE_OUTPUTS, &outputs, + sizeof(outputs)); + status = intel_sdvo_read_response(output, NULL, 0); + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_set_encoder_power_state(struct drm_output *output, + int mode) +{ + u8 status, state = SDVO_ENCODER_STATE_ON; + + switch (mode) { + case DPMSModeOn: + state = SDVO_ENCODER_STATE_ON; + break; + case DPMSModeStandby: + state = SDVO_ENCODER_STATE_STANDBY; + break; + case DPMSModeSuspend: + state = SDVO_ENCODER_STATE_SUSPEND; + break; + case DPMSModeOff: + state = SDVO_ENCODER_STATE_OFF; + break; + } + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_ENCODER_POWER_STATE, &state, + sizeof(state)); + status = intel_sdvo_read_response(output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_get_input_pixel_clock_range(struct drm_output *output, + int *clock_min, + int *clock_max) +{ + struct intel_sdvo_pixel_clock_range clocks; + u8 status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, + NULL, 0); + + status = intel_sdvo_read_response(output, &clocks, sizeof(clocks)); + + if (status != SDVO_CMD_STATUS_SUCCESS) + return FALSE; + + /* Convert the values from units of 10 kHz to kHz. */ + *clock_min = clocks.min * 10; + *clock_max = clocks.max * 10; + + return TRUE; +} + +static bool intel_sdvo_set_target_output(struct drm_output *output, + u16 outputs) +{ + u8 status; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_TARGET_OUTPUT, &outputs, + sizeof(outputs)); + + status = intel_sdvo_read_response(output, NULL, 0); + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_get_timing(struct drm_output *output, u8 cmd, + struct intel_sdvo_dtd *dtd) +{ + u8 status; + + intel_sdvo_write_cmd(output, cmd, NULL, 0); + status = intel_sdvo_read_response(output, &dtd->part1, + sizeof(dtd->part1)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return FALSE; + + intel_sdvo_write_cmd(output, cmd + 1, NULL, 0); + status = intel_sdvo_read_response(output, &dtd->part2, + sizeof(dtd->part2)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return FALSE; + + return TRUE; +} + +static bool intel_sdvo_get_input_timing(struct drm_output *output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_get_timing(output, + SDVO_CMD_GET_INPUT_TIMINGS_PART1, dtd); +} + +static bool intel_sdvo_get_output_timing(struct drm_output *output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_get_timing(output, + SDVO_CMD_GET_OUTPUT_TIMINGS_PART1, dtd); +} + +static bool intel_sdvo_set_timing(struct drm_output *output, u8 cmd, + struct intel_sdvo_dtd *dtd) +{ + u8 status; + + intel_sdvo_write_cmd(output, cmd, &dtd->part1, sizeof(dtd->part1)); + status = intel_sdvo_read_response(output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return FALSE; + + intel_sdvo_write_cmd(output, cmd + 1, &dtd->part2, sizeof(dtd->part2)); + status = intel_sdvo_read_response(output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return FALSE; + + return TRUE; +} + +static bool intel_sdvo_set_input_timing(struct drm_output *output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_set_timing(output, + SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd); +} + +static bool intel_sdvo_set_output_timing(struct drm_output *output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_set_timing(output, + SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd); +} + +#if 0 +static bool intel_sdvo_get_preferred_input_timing(struct drm_output *output, + struct intel_sdvo_dtd *dtd) +{ + struct intel_output *intel_output = output->driver_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u8 status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1, + NULL, 0); + + status = intel_sdvo_read_response(output, &dtd->part1, + sizeof(dtd->part1)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return FALSE; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2, + NULL, 0); + status = intel_sdvo_read_response(output, &dtd->part2, + sizeof(dtd->part2)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return FALSE; + + return TRUE; +} +#endif + +static int intel_sdvo_get_clock_rate_mult(struct drm_output *output) +{ + struct intel_output *intel_output = output->driver_private; + u8 response, status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_CLOCK_RATE_MULT, NULL, 0); + status = intel_sdvo_read_response(output, &response, 1); + + if (status != SDVO_CMD_STATUS_SUCCESS) { + DRM_DEBUG("Couldn't get SDVO clock rate multiplier\n"); + return SDVO_CLOCK_RATE_MULT_1X; + } else { + DRM_DEBUG("Current clock rate multiplier: %d\n", response); + } + + return response; +} + +static bool intel_sdvo_set_clock_rate_mult(struct drm_output *output, u8 val) +{ + u8 status; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1); + status = intel_sdvo_read_response(output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return FALSE; + + return TRUE; +} + +static bool intel_sdvo_mode_fixup(struct drm_output *output, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + /* Make the CRTC code factor in the SDVO pixel multiplier. The SDVO + * device will be told of the multiplier during mode_set. + */ + adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); + return TRUE; +} + +static void intel_sdvo_mode_set(struct drm_output *output, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + drm_device_t *dev = output->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_crtc *crtc = output->crtc; + struct intel_crtc *intel_crtc = crtc->driver_private; + struct intel_output *intel_output = output->driver_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u16 width, height; + u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len; + u16 h_sync_offset, v_sync_offset; + u32 sdvox; + struct intel_sdvo_dtd output_dtd; + int sdvo_pixel_multiply; + + if (!mode) + return; + + width = mode->crtc_hdisplay; + height = mode->crtc_vdisplay; + + /* do some mode translations */ + h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start; + h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; + + v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start; + v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; + + h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; + v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; + + output_dtd.part1.clock = mode->clock / 10; + output_dtd.part1.h_active = width & 0xff; + output_dtd.part1.h_blank = h_blank_len & 0xff; + output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) | + ((h_blank_len >> 8) & 0xf); + output_dtd.part1.v_active = height & 0xff; + output_dtd.part1.v_blank = v_blank_len & 0xff; + output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) | + ((v_blank_len >> 8) & 0xf); + + output_dtd.part2.h_sync_off = h_sync_offset; + output_dtd.part2.h_sync_width = h_sync_len & 0xff; + output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | + (v_sync_len & 0xf); + output_dtd.part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | + ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) | + ((v_sync_len & 0x30) >> 4); + + output_dtd.part2.dtd_flags = 0x18; + if (mode->flags & V_PHSYNC) + output_dtd.part2.dtd_flags |= 0x2; + if (mode->flags & V_PVSYNC) + output_dtd.part2.dtd_flags |= 0x4; + + output_dtd.part2.sdvo_flags = 0; + output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0; + output_dtd.part2.reserved = 0; + + /* Set the output timing to the screen */ + intel_sdvo_set_target_output(output, sdvo_priv->active_outputs); + intel_sdvo_set_output_timing(output, &output_dtd); + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(output, TRUE, FALSE); + + /* We would like to use i830_sdvo_create_preferred_input_timing() to + * provide the device with a timing it can support, if it supports that + * feature. However, presumably we would need to adjust the CRTC to + * output the preferred timing, and we don't support that currently. + */ +#if 0 + success = intel_sdvo_create_preferred_input_timing(output, clock, + width, height); + if (success) { + struct intel_sdvo_dtd *input_dtd; + + intel_sdvo_get_preferred_input_timing(output, &input_dtd); + intel_sdvo_set_input_timing(output, &input_dtd); + } +#else + intel_sdvo_set_input_timing(output, &output_dtd); +#endif + + switch (intel_sdvo_get_pixel_multiplier(mode)) { + case 1: + intel_sdvo_set_clock_rate_mult(output, + SDVO_CLOCK_RATE_MULT_1X); + break; + case 2: + intel_sdvo_set_clock_rate_mult(output, + SDVO_CLOCK_RATE_MULT_2X); + break; + case 4: + intel_sdvo_set_clock_rate_mult(output, + SDVO_CLOCK_RATE_MULT_4X); + break; + } + + /* Set the SDVO control regs. */ + sdvox = I915_READ(sdvo_priv->output_device); + switch (sdvo_priv->output_device) { + case SDVOB: + sdvox &= SDVOB_PRESERVE_MASK; + break; + case SDVOC: + sdvox &= SDVOC_PRESERVE_MASK; + break; + } + sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; + if (intel_crtc->pipe == 1) + sdvox |= SDVO_PIPE_B_SELECT; + + sdvo_pixel_multiply = intel_sdvo_get_pixel_multiplier(mode); + if (IS_I965G(dev)) { + /* done in crtc_mode_set as the dpll_md reg must be written + early */ + } else if (IS_I945G(dev) || IS_I945GM(dev)) { + /* done in crtc_mode_set as it lives inside the + dpll register */ + } else { + sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT; + } + + intel_sdvo_write_sdvox(output, sdvox); +} + +static void intel_sdvo_dpms(struct drm_output *output, int mode) +{ + drm_device_t *dev = output->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_output *intel_output = output->driver_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u32 temp; + + if (mode != DPMSModeOn) { + intel_sdvo_set_active_outputs(output, 0); + if (0) + intel_sdvo_set_encoder_power_state(output, mode); + + if (mode == DPMSModeOff) { + temp = I915_READ(sdvo_priv->output_device); + if ((temp & SDVO_ENABLE) != 0) { + intel_sdvo_write_sdvox(output, temp & ~SDVO_ENABLE); + } + } + } else { + bool input1, input2; + int i; + u8 status; + + temp = I915_READ(sdvo_priv->output_device); + if ((temp & SDVO_ENABLE) == 0) + intel_sdvo_write_sdvox(output, temp | SDVO_ENABLE); + for (i = 0; i < 2; i++) + intel_wait_for_vblank(dev); + + status = intel_sdvo_get_trained_inputs(output, &input1, + &input2); + + + /* Warn if the device reported failure to sync. */ + if (status == SDVO_CMD_STATUS_SUCCESS && !input1) { + DRM_ERROR("First %s output reported failure to sync\n", + SDVO_NAME(sdvo_priv)); + } + + if (0) + intel_sdvo_set_encoder_power_state(output, mode); + intel_sdvo_set_active_outputs(output, sdvo_priv->active_outputs); + } + return; +} + +static void intel_sdvo_save(struct drm_output *output) +{ + drm_device_t *dev = output->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_output *intel_output = output->driver_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + int o; + + sdvo_priv->save_sdvo_mult = intel_sdvo_get_clock_rate_mult(output); + intel_sdvo_get_active_outputs(output, &sdvo_priv->save_active_outputs); + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { + intel_sdvo_set_target_input(output, TRUE, FALSE); + intel_sdvo_get_input_timing(output, + &sdvo_priv->save_input_dtd_1); + } + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { + intel_sdvo_set_target_input(output, FALSE, TRUE); + intel_sdvo_get_input_timing(output, + &sdvo_priv->save_input_dtd_2); + } + + for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++) + { + u16 this_output = (1 << o); + if (sdvo_priv->caps.output_flags & this_output) + { + intel_sdvo_set_target_output(output, this_output); + intel_sdvo_get_output_timing(output, + &sdvo_priv->save_output_dtd[o]); + } + } + + sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->output_device); +} + +static void intel_sdvo_restore(struct drm_output *output) +{ + drm_device_t *dev = output->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_output *intel_output = output->driver_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + int o; + int i; + bool input1, input2; + u8 status; + + intel_sdvo_set_active_outputs(output, 0); + + for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++) + { + u16 this_output = (1 << o); + if (sdvo_priv->caps.output_flags & this_output) { + intel_sdvo_set_target_output(output, this_output); + intel_sdvo_set_output_timing(output, &sdvo_priv->save_output_dtd[o]); + } + } + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { + intel_sdvo_set_target_input(output, TRUE, FALSE); + intel_sdvo_set_input_timing(output, &sdvo_priv->save_input_dtd_1); + } + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { + intel_sdvo_set_target_input(output, FALSE, TRUE); + intel_sdvo_set_input_timing(output, &sdvo_priv->save_input_dtd_2); + } + + intel_sdvo_set_clock_rate_mult(output, sdvo_priv->save_sdvo_mult); + + I915_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX); + + if (sdvo_priv->save_SDVOX & SDVO_ENABLE) + { + for (i = 0; i < 2; i++) + intel_wait_for_vblank(dev); + status = intel_sdvo_get_trained_inputs(output, &input1, &input2); + if (status == SDVO_CMD_STATUS_SUCCESS && !input1) + DRM_DEBUG("First %s output reported failure to sync\n", + SDVO_NAME(sdvo_priv)); + } + + intel_sdvo_set_active_outputs(output, sdvo_priv->save_active_outputs); +} + +static int intel_sdvo_mode_valid(struct drm_output *output, + struct drm_display_mode *mode) +{ + struct intel_output *intel_output = output->driver_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + + if (mode->flags & V_DBLSCAN) + return MODE_NO_DBLESCAN; + + if (sdvo_priv->pixel_clock_min > mode->clock) + return MODE_CLOCK_HIGH; + + if (sdvo_priv->pixel_clock_max < mode->clock) + return MODE_CLOCK_LOW; + + return MODE_OK; +} + +static bool intel_sdvo_get_capabilities(struct drm_output *output, struct intel_sdvo_caps *caps) +{ + u8 status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_DEVICE_CAPS, NULL, 0); + status = intel_sdvo_read_response(output, caps, sizeof(*caps)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return FALSE; + + return TRUE; +} + + +static void intel_sdvo_dump_cmd(struct drm_output *output, int opcode) +{ + + +} + +static void intel_sdvo_dump_device(struct drm_output *output) +{ + +} + +void intel_sdvo_dump(void) +{ + +} + + +static enum drm_output_status intel_sdvo_detect(struct drm_output *output) +{ + u8 response[2]; + u8 status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0); + status = intel_sdvo_read_response(output, &response, 2); + + if (status != SDVO_CMD_STATUS_SUCCESS) + return output_status_unknown; + + DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]); + if ((response[0] != 0) || (response[1] != 0)) + return output_status_connected; + else + return output_status_disconnected; +} + +static int intel_sdvo_get_modes(struct drm_output *output) +{ + struct drm_display_mode *modes; + + /* set the bus switch and get the modes */ + intel_sdvo_set_control_bus_switch(output, SDVO_CONTROL_BUS_DDC2); + intel_ddc_get_modes(output); + + if (list_empty(&output->probed_modes)) + return 0; + return 1; +#if 0 + /* Mac mini hack. On this device, I get DDC through the analog, which + * load-detects as disconnected. I fail to DDC through the SDVO DDC, + * but it does load-detect as connected. So, just steal the DDC bits + * from analog when we fail at finding it the right way. + */ + /* TODO */ + return NULL; + + return NULL; +#endif +} + +static void intel_sdvo_destroy(struct drm_output *output) +{ + struct intel_output *intel_output = output->driver_private; + + if (intel_output->i2c_bus) + intel_i2c_destroy(intel_output->i2c_bus); + + if (intel_output) { + kfree(intel_output); + output->driver_private = NULL; + } +} + +static const struct drm_output_funcs intel_sdvo_output_funcs = { + .dpms = intel_sdvo_dpms, + .save = intel_sdvo_save, + .restore = intel_sdvo_restore, + .mode_valid = intel_sdvo_mode_valid, + .mode_fixup = intel_sdvo_mode_fixup, + .prepare = intel_output_prepare, + .mode_set = intel_sdvo_mode_set, + .commit = intel_output_commit, + .detect = intel_sdvo_detect, + .get_modes = intel_sdvo_get_modes, + .cleanup = intel_sdvo_destroy +}; + +void intel_sdvo_init(drm_device_t *dev, int output_device) +{ + struct drm_output *output; + struct intel_output *intel_output; + struct intel_sdvo_priv *sdvo_priv; + struct intel_i2c_chan *i2cbus = NULL; + u8 ch[0x40]; + int i; + char name[DRM_OUTPUT_LEN]; + char *name_prefix; + char *name_suffix; + + + output = drm_output_create(dev, &intel_sdvo_output_funcs, NULL); + if (!output) + return; + + intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL); + if (!intel_output) { + drm_output_destroy(output); + return; + } + + sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); + intel_output->type = INTEL_OUTPUT_SDVO; + output->driver_private = intel_output; + output->interlace_allowed = 0; + output->doublescan_allowed = 0; + + /* setup the DDC bus. */ + if (output_device == SDVOB) + i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); + else + i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); + + if (i2cbus == NULL) { + drm_output_destroy(output); + return; + } + + sdvo_priv->i2c_bus = i2cbus; + + if (output_device == SDVOB) { + name_suffix = "-1"; + sdvo_priv->i2c_bus->slave_addr = 0x38; + } else { + name_suffix = "-2"; + sdvo_priv->i2c_bus->slave_addr = 0x39; + } + + sdvo_priv->output_device = output_device; + intel_output->i2c_bus = i2cbus; + intel_output->dev_priv = sdvo_priv; + + + /* Read the regs to test if we can talk to the device */ + for (i = 0; i < 0x40; i++) { + if (!intel_sdvo_read_byte(output, i, &ch[i])) { + DRM_DEBUG("No SDVO device found on SDVO%c\n", + output_device == SDVOB ? 'B' : 'C'); + drm_output_destroy(output); + return; + } + } + + intel_sdvo_get_capabilities(output, &sdvo_priv->caps); + + memset(&sdvo_priv->active_outputs, 0, sizeof(sdvo_priv->active_outputs)); + + if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0; + output->subpixel_order = SubPixelHorizontalRGB; + name_prefix="TMDS"; + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1; + output->subpixel_order = SubPixelHorizontalRGB; + name_prefix="TMDS"; + } + else + { + unsigned char bytes[2]; + + memcpy (bytes, &sdvo_priv->caps.output_flags, 2); + DRM_DEBUG("%s: No active TMDS outputs (0x%02x%02x)\n", + SDVO_NAME(sdvo_priv), + bytes[0], bytes[1]); + } + strcpy (name, name_prefix); + strcat (name, name_suffix); + if (!drm_output_rename(output, name)) + { + drm_output_destroy(output); + return; + } + + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(output, TRUE, FALSE); + + intel_sdvo_get_input_pixel_clock_range(output, + &sdvo_priv->pixel_clock_min, + &sdvo_priv->pixel_clock_max); + + + DRM_DEBUG("%s device VID/DID: %02X:%02X.%02X, " + "clock range %dMHz - %dMHz, " + "input 1: %c, input 2: %c, " + "output 1: %c, output 2: %c\n", + SDVO_NAME(sdvo_priv), + sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id, + sdvo_priv->caps.device_rev_id, + sdvo_priv->pixel_clock_min / 1000, + sdvo_priv->pixel_clock_max / 1000, + (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', + (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', + sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0 ? 'Y' : 'N', + sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1 ? 'Y' : 'N'); + + intel_output->ddc_bus = i2cbus; +} diff --git a/linux-core/intel_sdvo_regs.h b/linux-core/intel_sdvo_regs.h new file mode 100644 index 0000000..b8cb1dc --- /dev/null +++ b/linux-core/intel_sdvo_regs.h @@ -0,0 +1,302 @@ +/* + * Copyright © 2006 Intel Corporation + */ + +/** + * @file SDVO command definitions and structures. + */ + +#define SDVO_OUTPUT_FIRST (0) +#define SDVO_OUTPUT_TMDS0 (1 << 0) +#define SDVO_OUTPUT_RGB0 (1 << 1) +#define SDVO_OUTPUT_CVBS0 (1 << 2) +#define SDVO_OUTPUT_SVID0 (1 << 3) +#define SDVO_OUTPUT_YPRPB0 (1 << 4) +#define SDVO_OUTPUT_SCART0 (1 << 5) +#define SDVO_OUTPUT_LVDS0 (1 << 6) +#define SDVO_OUTPUT_TMDS1 (1 << 8) +#define SDVO_OUTPUT_RGB1 (1 << 13) +#define SDVO_OUTPUT_LVDS1 (1 << 14) +#define SDVO_OUTPUT_LAST (14) + +struct intel_sdvo_caps { + u8 vendor_id; + u8 device_id; + u8 device_rev_id; + u8 sdvo_version_major; + u8 sdvo_version_minor; + unsigned int sdvo_inputs_mask:2; + unsigned int smooth_scaling:1; + unsigned int sharp_scaling:1; + unsigned int up_scaling:1; + unsigned int down_scaling:1; + unsigned int stall_support:1; + unsigned int pad:1; + u16 output_flags; +} __attribute__((packed)); + +/** This matches the EDID DTD structure, more or less */ +struct intel_sdvo_dtd { + struct { + u16 clock; /**< pixel clock, in 10kHz units */ + u8 h_active; /**< lower 8 bits (pixels) */ + u8 h_blank; /**< lower 8 bits (pixels) */ + u8 h_high; /**< upper 4 bits each h_active, h_blank */ + u8 v_active; /**< lower 8 bits (lines) */ + u8 v_blank; /**< lower 8 bits (lines) */ + u8 v_high; /**< upper 4 bits each v_active, v_blank */ + } part1; + + struct { + u8 h_sync_off; /**< lower 8 bits, from hblank start */ + u8 h_sync_width; /**< lower 8 bits (pixels) */ + /** lower 4 bits each vsync offset, vsync width */ + u8 v_sync_off_width; + /** + * 2 high bits of hsync offset, 2 high bits of hsync width, + * bits 4-5 of vsync offset, and 2 high bits of vsync width. + */ + u8 sync_off_width_high; + u8 dtd_flags; + u8 sdvo_flags; + /** bits 6-7 of vsync offset at bits 6-7 */ + u8 v_sync_off_high; + u8 reserved; + } part2; +} __attribute__((packed)); + +struct intel_sdvo_pixel_clock_range { + u16 min; /**< pixel clock, in 10kHz units */ + u16 max; /**< pixel clock, in 10kHz units */ +} __attribute__((packed)); + +struct intel_sdvo_preferred_input_timing_args { + u16 clock; + u16 width; + u16 height; +} __attribute__((packed)); + +/* I2C registers for SDVO */ +#define SDVO_I2C_ARG_0 0x07 +#define SDVO_I2C_ARG_1 0x06 +#define SDVO_I2C_ARG_2 0x05 +#define SDVO_I2C_ARG_3 0x04 +#define SDVO_I2C_ARG_4 0x03 +#define SDVO_I2C_ARG_5 0x02 +#define SDVO_I2C_ARG_6 0x01 +#define SDVO_I2C_ARG_7 0x00 +#define SDVO_I2C_OPCODE 0x08 +#define SDVO_I2C_CMD_STATUS 0x09 +#define SDVO_I2C_RETURN_0 0x0a +#define SDVO_I2C_RETURN_1 0x0b +#define SDVO_I2C_RETURN_2 0x0c +#define SDVO_I2C_RETURN_3 0x0d +#define SDVO_I2C_RETURN_4 0x0e +#define SDVO_I2C_RETURN_5 0x0f +#define SDVO_I2C_RETURN_6 0x10 +#define SDVO_I2C_RETURN_7 0x11 +#define SDVO_I2C_VENDOR_BEGIN 0x20 + +/* Status results */ +#define SDVO_CMD_STATUS_POWER_ON 0x0 +#define SDVO_CMD_STATUS_SUCCESS 0x1 +#define SDVO_CMD_STATUS_NOTSUPP 0x2 +#define SDVO_CMD_STATUS_INVALID_ARG 0x3 +#define SDVO_CMD_STATUS_PENDING 0x4 +#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED 0x5 +#define SDVO_CMD_STATUS_SCALING_NOT_SUPP 0x6 + +/* SDVO commands, argument/result registers */ + +#define SDVO_CMD_RESET 0x01 + +/** Returns a struct intel_sdvo_caps */ +#define SDVO_CMD_GET_DEVICE_CAPS 0x02 + +#define SDVO_CMD_GET_FIRMWARE_REV 0x86 +# define SDVO_DEVICE_FIRMWARE_MINOR SDVO_I2C_RETURN_0 +# define SDVO_DEVICE_FIRMWARE_MAJOR SDVO_I2C_RETURN_1 +# define SDVO_DEVICE_FIRMWARE_PATCH SDVO_I2C_RETURN_2 + +/** + * Reports which inputs are trained (managed to sync). + * + * Devices must have trained within 2 vsyncs of a mode change. + */ +#define SDVO_CMD_GET_TRAINED_INPUTS 0x03 +struct intel_sdvo_get_trained_inputs_response { + unsigned int input0_trained:1; + unsigned int input1_trained:1; + unsigned int pad:6; +} __attribute__((packed)); + +/** Returns a struct intel_sdvo_output_flags of active outputs. */ +#define SDVO_CMD_GET_ACTIVE_OUTPUTS 0x04 + +/** + * Sets the current set of active outputs. + * + * Takes a struct intel_sdvo_output_flags. Must be preceded by a SET_IN_OUT_MAP + * on multi-output devices. + */ +#define SDVO_CMD_SET_ACTIVE_OUTPUTS 0x05 + +/** + * Returns the current mapping of SDVO inputs to outputs on the device. + * + * Returns two struct intel_sdvo_output_flags structures. + */ +#define SDVO_CMD_GET_IN_OUT_MAP 0x06 + +/** + * Sets the current mapping of SDVO inputs to outputs on the device. + * + * Takes two struct i380_sdvo_output_flags structures. + */ +#define SDVO_CMD_SET_IN_OUT_MAP 0x07 + +/** + * Returns a struct intel_sdvo_output_flags of attached displays. + */ +#define SDVO_CMD_GET_ATTACHED_DISPLAYS 0x0b + +/** + * Returns a struct intel_sdvo_ouptut_flags of displays supporting hot plugging. + */ +#define SDVO_CMD_GET_HOT_PLUG_SUPPORT 0x0c + +/** + * Takes a struct intel_sdvo_output_flags. + */ +#define SDVO_CMD_SET_ACTIVE_HOT_PLUG 0x0d + +/** + * Returns a struct intel_sdvo_output_flags of displays with hot plug + * interrupts enabled. + */ +#define SDVO_CMD_GET_ACTIVE_HOT_PLUG 0x0e + +#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE 0x0f +struct intel_sdvo_get_interrupt_event_source_response { + u16 interrupt_status; + unsigned int ambient_light_interrupt:1; + unsigned int pad:7; +} __attribute__((packed)); + +/** + * Selects which input is affected by future input commands. + * + * Commands affected include SET_INPUT_TIMINGS_PART[12], + * GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12], + * GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS. + */ +#define SDVO_CMD_SET_TARGET_INPUT 0x10 +struct intel_sdvo_set_target_input_args { + unsigned int target_1:1; + unsigned int pad:7; +} __attribute__((packed)); + +/** + * Takes a struct intel_sdvo_output_flags of which outputs are targetted by + * future output commands. + * + * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12], + * GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE. + */ +#define SDVO_CMD_SET_TARGET_OUTPUT 0x11 + +#define SDVO_CMD_GET_INPUT_TIMINGS_PART1 0x12 +#define SDVO_CMD_GET_INPUT_TIMINGS_PART2 0x13 +#define SDVO_CMD_SET_INPUT_TIMINGS_PART1 0x14 +#define SDVO_CMD_SET_INPUT_TIMINGS_PART2 0x15 +#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1 0x16 +#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2 0x17 +#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1 0x18 +#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2 0x19 +/* Part 1 */ +# define SDVO_DTD_CLOCK_LOW SDVO_I2C_ARG_0 +# define SDVO_DTD_CLOCK_HIGH SDVO_I2C_ARG_1 +# define SDVO_DTD_H_ACTIVE SDVO_I2C_ARG_2 +# define SDVO_DTD_H_BLANK SDVO_I2C_ARG_3 +# define SDVO_DTD_H_HIGH SDVO_I2C_ARG_4 +# define SDVO_DTD_V_ACTIVE SDVO_I2C_ARG_5 +# define SDVO_DTD_V_BLANK SDVO_I2C_ARG_6 +# define SDVO_DTD_V_HIGH SDVO_I2C_ARG_7 +/* Part 2 */ +# define SDVO_DTD_HSYNC_OFF SDVO_I2C_ARG_0 +# define SDVO_DTD_HSYNC_WIDTH SDVO_I2C_ARG_1 +# define SDVO_DTD_VSYNC_OFF_WIDTH SDVO_I2C_ARG_2 +# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH SDVO_I2C_ARG_3 +# define SDVO_DTD_DTD_FLAGS SDVO_I2C_ARG_4 +# define SDVO_DTD_DTD_FLAG_INTERLACED (1 << 7) +# define SDVO_DTD_DTD_FLAG_STEREO_MASK (3 << 5) +# define SDVO_DTD_DTD_FLAG_INPUT_MASK (3 << 3) +# define SDVO_DTD_DTD_FLAG_SYNC_MASK (3 << 1) +# define SDVO_DTD_SDVO_FLAS SDVO_I2C_ARG_5 +# define SDVO_DTD_SDVO_FLAG_STALL (1 << 7) +# define SDVO_DTD_SDVO_FLAG_CENTERED (0 << 6) +# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT (1 << 6) +# define SDVO_DTD_SDVO_FLAG_SCALING_MASK (3 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_NONE (0 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP (1 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH (2 << 4) +# define SDVO_DTD_VSYNC_OFF_HIGH SDVO_I2C_ARG_6 + +/** + * Generates a DTD based on the given width, height, and flags. + * + * This will be supported by any device supporting scaling or interlaced + * modes. + */ +#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING 0x1a +# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW SDVO_I2C_ARG_0 +# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH SDVO_I2C_ARG_1 +# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW SDVO_I2C_ARG_2 +# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH SDVO_I2C_ARG_3 +# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW SDVO_I2C_ARG_4 +# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH SDVO_I2C_ARG_5 +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS SDVO_I2C_ARG_6 +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED (1 << 0) +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED (1 << 1) + +#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1 0x1b +#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2 0x1c + +/** Returns a struct intel_sdvo_pixel_clock_range */ +#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE 0x1d +/** Returns a struct intel_sdvo_pixel_clock_range */ +#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE 0x1e + +/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */ +#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS 0x1f + +/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ +#define SDVO_CMD_GET_CLOCK_RATE_MULT 0x20 +/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ +#define SDVO_CMD_SET_CLOCK_RATE_MULT 0x21 +# define SDVO_CLOCK_RATE_MULT_1X (1 << 0) +# define SDVO_CLOCK_RATE_MULT_2X (1 << 1) +# define SDVO_CLOCK_RATE_MULT_4X (1 << 3) + +#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27 + +#define SDVO_CMD_GET_TV_FORMAT 0x28 + +#define SDVO_CMD_SET_TV_FORMAT 0x29 + +#define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a +#define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b +#define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c +# define SDVO_ENCODER_STATE_ON (1 << 0) +# define SDVO_ENCODER_STATE_STANDBY (1 << 1) +# define SDVO_ENCODER_STATE_SUSPEND (1 << 2) +# define SDVO_ENCODER_STATE_OFF (1 << 3) + +#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT 0x93 + +#define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a +# define SDVO_CONTROL_BUS_PROM 0x0 +# define SDVO_CONTROL_BUS_DDC1 0x1 +# define SDVO_CONTROL_BUS_DDC2 0x2 +# define SDVO_CONTROL_BUS_DDC3 0x3 + diff --git a/shared-core/i915_dma.c b/shared-core/i915_dma.c index aed3eea..a5f1473 100644 --- a/shared-core/i915_dma.c +++ b/shared-core/i915_dma.c @@ -31,13 +31,6 @@ #include "i915_drm.h" #include "i915_drv.h" -#define IS_I965G(dev) (dev->pci_device == 0x2972 || \ - dev->pci_device == 0x2982 || \ - dev->pci_device == 0x2992 || \ - dev->pci_device == 0x29A2 || \ - dev->pci_device == 0x2A02) - - /* Really want an OS-independent resettable timer. Would like to have * this loop run for (eg) 3 sec, but have the timer reset every time * the head pointer changes, so that EBUSY only happens if the ring @@ -87,6 +80,7 @@ void i915_kernel_lost_context(drm_device_t * dev) static int i915_dma_cleanup(drm_device_t * dev) { + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* Make sure interrupts are disabled here because the uninstall ioctl * may not have been called from userspace and after dev_private * is freed, it's too late. @@ -94,25 +88,16 @@ static int i915_dma_cleanup(drm_device_t * dev) if (dev->irq) drm_irq_uninstall(dev); - if (dev->dev_private) { - drm_i915_private_t *dev_priv = - (drm_i915_private_t *) dev->dev_private; - - if (dev_priv->ring.virtual_start) { - drm_core_ioremapfree(&dev_priv->ring.map, dev); - } - - if (dev_priv->status_page_dmah) { - drm_pci_free(dev, dev_priv->status_page_dmah); - /* Need to rewrite hardware status page */ - I915_WRITE(0x02080, 0x1ffff000); - } - - drm_free(dev->dev_private, sizeof(drm_i915_private_t), - DRM_MEM_DRIVER); - - dev->dev_private = NULL; + if (dev_priv->status_page_dmah) { + drm_pci_free(dev, dev_priv->status_page_dmah); + dev_priv->status_page_dmah = NULL; + dev_priv->hw_status_page = NULL; + dev_priv->dma_status_page = 0; + /* Need to rewrite hardware status page */ + I915_WRITE(0x02080, 0x1ffff000); } + + dev_priv->sarea_priv = NULL; return 0; } @@ -121,8 +106,6 @@ static int i915_initialize(drm_device_t * dev, drm_i915_private_t * dev_priv, drm_i915_init_t * init) { - memset(dev_priv, 0, sizeof(drm_i915_private_t)); - DRM_GETSAREA(); if (!dev_priv->sarea) { DRM_ERROR("can not find sarea!\n"); @@ -131,14 +114,6 @@ static int i915_initialize(drm_device_t * dev, return DRM_ERR(EINVAL); } - dev_priv->mmio_map = drm_core_findmap(dev, init->mmio_offset); - if (!dev_priv->mmio_map) { - dev->dev_private = (void *)dev_priv; - i915_dma_cleanup(dev); - DRM_ERROR("can not find mmio map!\n"); - return DRM_ERR(EINVAL); - } - dev_priv->sarea_priv = (drm_i915_sarea_t *) ((u8 *) dev_priv->sarea->handle + init->sarea_priv_offset); @@ -195,7 +170,11 @@ static int i915_initialize(drm_device_t * dev, I915_WRITE(0x02080, dev_priv->dma_status_page); DRM_DEBUG("Enabled hardware status page\n"); - dev->dev_private = (void *)dev_priv; + + /* this probably doesn't belong here - TODO */ + drm_framebuffer_set_object(dev, dev_priv->sarea_priv->front_handle); + drm_set_desired_modes(dev); + return 0; } @@ -237,7 +216,7 @@ static int i915_dma_resume(drm_device_t * dev) static int i915_dma_init(DRM_IOCTL_ARGS) { DRM_DEVICE; - drm_i915_private_t *dev_priv; + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; drm_i915_init_t init; int retcode = 0; @@ -246,10 +225,6 @@ static int i915_dma_init(DRM_IOCTL_ARGS) switch (init.func) { case I915_INIT_DMA: - dev_priv = drm_alloc(sizeof(drm_i915_private_t), - DRM_MEM_DRIVER); - if (dev_priv == NULL) - return DRM_ERR(ENOMEM); retcode = i915_initialize(dev, dev_priv, &init); break; case I915_CLEANUP_DMA: @@ -882,6 +857,18 @@ static int i915_mmio(DRM_IOCTL_ARGS) int i915_driver_load(drm_device_t *dev, unsigned long flags) { + drm_i915_private_t *dev_priv; + int ret; + unsigned long mmiobase, mmiolen; + + dev_priv = drm_alloc(sizeof(drm_i915_private_t), DRM_MEM_DRIVER); + if (dev_priv == NULL) + return DRM_ERR(ENOMEM); + + memset(dev_priv, 0, sizeof(drm_i915_private_t)); + dev->dev_private = (void *)dev_priv; +// dev_priv->flags = flags; + /* i915 has 4 more counters */ dev->counters += 4; dev->types[6] = _DRM_STAT_IRQ; @@ -889,25 +876,55 @@ int i915_driver_load(drm_device_t *dev, unsigned long flags) dev->types[8] = _DRM_STAT_SECONDARY; dev->types[9] = _DRM_STAT_DMA; + if (IS_I9XX(dev)) { + dev_priv->mmiobase = drm_get_resource_start(dev, 0); + dev_priv->mmiolen = drm_get_resource_len(dev, 0); + } else if (drm_get_resource_start(dev, 1)) { + dev_priv->mmiobase = drm_get_resource_start(dev, 1); + dev_priv->mmiolen = drm_get_resource_len(dev, 1); + } else { + DRM_ERROR("Unable to find MMIO registers\n"); + return -ENODEV; + } + + ret = drm_addmap(dev, dev_priv->mmiobase, dev_priv->mmiolen, + _DRM_REGISTERS, _DRM_READ_ONLY, &dev_priv->mmio_map); + if (ret != 0) { + DRM_ERROR("Cannot add mapping for MMIO registers\n"); + return ret; + } + + DRM_DEBUG("dev_priv->mmio map is %08X\n", dev_priv->mmio_map); + intel_modeset_init(dev); + return 0; +} + +int i915_driver_unload(drm_device_t *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + intel_modeset_cleanup(dev); + drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER); + + dev->dev_private = NULL; return 0; } void i915_driver_lastclose(drm_device_t * dev) { - if (dev->dev_private) { - drm_i915_private_t *dev_priv = dev->dev_private; - i915_do_cleanup_pageflip(dev); - i915_mem_takedown(&(dev_priv->agp_heap)); - } + drm_i915_private_t *dev_priv = dev->dev_private; + + i915_mem_takedown(&(dev_priv->agp_heap)); + i915_dma_cleanup(dev); + + dev_priv->mmio_map = NULL; } void i915_driver_preclose(drm_device_t * dev, DRMFILE filp) { - if (dev->dev_private) { - drm_i915_private_t *dev_priv = dev->dev_private; - i915_mem_release(dev, filp, dev_priv->agp_heap); - } + drm_i915_private_t *dev_priv = dev->dev_private; + i915_mem_release(dev, filp, dev_priv->agp_heap); } drm_ioctl_desc_t i915_ioctls[] = { @@ -950,8 +967,22 @@ int i915_driver_device_is_agp(drm_device_t * dev) int i915_driver_firstopen(struct drm_device *dev) { -#ifdef I915_HAVE_BUFFER + drm_i915_private_t *dev_priv = dev->dev_private; + int ret; + DRM_DEBUG("\n"); drm_bo_driver_init(dev); -#endif + + if (!dev_priv->mmio_map) { + ret = drm_addmap(dev, dev_priv->mmiobase, dev_priv->mmiolen, + _DRM_REGISTERS, _DRM_READ_ONLY, &dev_priv->mmio_map); + if (ret != 0) { + DRM_ERROR("Cannot add mapping for MMIO registers\n"); + return ret; + } + } + + DRM_DEBUG("dev_priv->mmio map is %08X\n", dev_priv->mmio_map); + return 0; } + diff --git a/shared-core/i915_drv.h b/shared-core/i915_drv.h index e8a7be2..f37f587 100644 --- a/shared-core/i915_drv.h +++ b/shared-core/i915_drv.h @@ -92,6 +92,9 @@ typedef struct drm_i915_private { drm_local_map_t *sarea; drm_local_map_t *mmio_map; + unsigned long mmiobase; + unsigned long mmiolen; + drm_i915_sarea_t *sarea_priv; drm_i915_ring_buffer_t ring; @@ -145,6 +148,8 @@ extern int i915_max_ioctl; /* i915_dma.c */ extern void i915_kernel_lost_context(drm_device_t * dev); extern int i915_driver_load(struct drm_device *, unsigned long flags); +extern int i915_driver_unload(drm_device_t *dev); +extern int i915_driver_firstopen(struct drm_device *dev); extern void i915_driver_lastclose(drm_device_t * dev); extern void i915_driver_preclose(drm_device_t * dev, DRMFILE filp); extern int i915_driver_device_is_agp(drm_device_t * dev); @@ -206,6 +211,12 @@ extern int i915_move(drm_buffer_object_t *bo, int evict, #endif + +/* modesetting */ +extern void intel_modeset_init(drm_device_t *dev); +extern void intel_modeset_cleanup(drm_device_t *dev); + + #define I915_READ(reg) DRM_READ32(dev_priv->mmio_map, (reg)) #define I915_WRITE(reg,val) DRM_WRITE32(dev_priv->mmio_map, (reg), (val)) #define I915_READ16(reg) DRM_READ16(dev_priv->mmio_map, (reg)) @@ -273,6 +284,30 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller); #define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17) #define I915_VBLANK_CLEAR (1UL<<1) +#define GPIOA 0x5010 +#define GPIOB 0x5014 +#define GPIOC 0x5018 +#define GPIOD 0x501c +#define GPIOE 0x5020 +#define GPIOF 0x5024 +#define GPIOG 0x5028 +#define GPIOH 0x502c +# define GPIO_CLOCK_DIR_MASK (1 << 0) +# define GPIO_CLOCK_DIR_IN (0 << 1) +# define GPIO_CLOCK_DIR_OUT (1 << 1) +# define GPIO_CLOCK_VAL_MASK (1 << 2) +# define GPIO_CLOCK_VAL_OUT (1 << 3) +# define GPIO_CLOCK_VAL_IN (1 << 4) +# define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) +# define GPIO_DATA_DIR_MASK (1 << 8) +# define GPIO_DATA_DIR_IN (0 << 9) +# define GPIO_DATA_DIR_OUT (1 << 9) +# define GPIO_DATA_VAL_MASK (1 << 10) +# define GPIO_DATA_VAL_OUT (1 << 11) +# define GPIO_DATA_VAL_IN (1 << 12) +# define GPIO_DATA_PULLUP_DISABLE (1 << 13) + + #define SRX_INDEX 0x3c4 #define SRX_DATA 0x3c5 #define SR01 1 @@ -281,6 +316,8 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller); #define PPCR 0x61204 #define PPCR_ON (1<<0) +#define DVOA 0x61120 +#define DVOA_ON (1<<31) #define DVOB 0x61140 #define DVOB_ON (1<<31) #define DVOC 0x61160 @@ -363,4 +400,441 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller); #define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5]) #define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) + +#define BLC_PWM_CTL 0x61254 +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) +/** + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) +/** + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) + +#define I915_GCFGC 0xf0 +#define I915_LOW_FREQUENCY_ENABLE (1 << 7) +#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) +#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define I915_DISPLAY_CLOCK_MASK (7 << 4) + +#define I855_HPLLCC 0xc0 +#define I855_CLOCK_CONTROL_MASK (3 << 0) +#define I855_CLOCK_133_200 (0 << 0) +#define I855_CLOCK_100_200 (1 << 0) +#define I855_CLOCK_100_133 (2 << 0) +#define I855_CLOCK_166_250 (3 << 0) + +/* I830 CRTC registers */ +#define HTOTAL_A 0x60000 +#define HBLANK_A 0x60004 +#define HSYNC_A 0x60008 +#define VTOTAL_A 0x6000c +#define VBLANK_A 0x60010 +#define VSYNC_A 0x60014 +#define PIPEASRC 0x6001c +#define BCLRPAT_A 0x60020 +#define VSYNCSHIFT_A 0x60028 + +#define HTOTAL_B 0x61000 +#define HBLANK_B 0x61004 +#define HSYNC_B 0x61008 +#define VTOTAL_B 0x6100c +#define VBLANK_B 0x61010 +#define VSYNC_B 0x61014 +#define PIPEBSRC 0x6101c +#define BCLRPAT_B 0x61020 +#define VSYNCSHIFT_B 0x61028 + +#define PP_STATUS 0x61200 +# define PP_ON (1 << 31) +/** + * Indicates that all dependencies of the panel are on: + * + * - PLL enabled + * - pipe enabled + * - LVDS/DVOB/DVOC on + */ +# define PP_READY (1 << 30) +# define PP_SEQUENCE_NONE (0 << 28) +# define PP_SEQUENCE_ON (1 << 28) +# define PP_SEQUENCE_OFF (2 << 28) +# define PP_SEQUENCE_MASK 0x30000000 +#define PP_CONTROL 0x61204 +# define POWER_TARGET_ON (1 << 0) + +#define LVDSPP_ON 0x61208 +#define LVDSPP_OFF 0x6120c +#define PP_CYCLE 0x61210 + +#define PFIT_CONTROL 0x61230 +# define PFIT_ENABLE (1 << 31) +# define VERT_INTERP_DISABLE (0 << 10) +# define VERT_INTERP_BILINEAR (1 << 10) +# define VERT_INTERP_MASK (3 << 10) +# define VERT_AUTO_SCALE (1 << 9) +# define HORIZ_INTERP_DISABLE (0 << 6) +# define HORIZ_INTERP_BILINEAR (1 << 6) +# define HORIZ_INTERP_MASK (3 << 6) +# define HORIZ_AUTO_SCALE (1 << 5) +# define PANEL_8TO6_DITHER_ENABLE (1 << 3) + +#define PFIT_PGM_RATIOS 0x61234 +# define PFIT_VERT_SCALE_MASK 0xfff00000 +# define PFIT_HORIZ_SCALE_MASK 0x0000fff0 + +#define PFIT_AUTO_RATIOS 0x61238 + + +#define DPLL_A 0x06014 +#define DPLL_B 0x06018 +# define DPLL_VCO_ENABLE (1 << 31) +# define DPLL_DVO_HIGH_SPEED (1 << 30) +# define DPLL_SYNCLOCK_ENABLE (1 << 29) +# define DPLL_VGA_MODE_DIS (1 << 28) +# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ +# define DPLLB_MODE_LVDS (2 << 26) /* i915 */ +# define DPLL_MODE_MASK (3 << 26) +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ +# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ +# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ +/** + * The i830 generation, in DAC/serial mode, defines p1 as two plus this + * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 +/** + * The i830 generation, in LVDS mode, defines P1 as the bit number set within + * this field (only one bit may be set). + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 +# define DPLL_FPA01_P1_POST_DIV_SHIFT 16 +# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */ +# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ +# define PLL_REF_INPUT_DREFCLK (0 << 13) +# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ +# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ +# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) +# define PLL_REF_INPUT_MASK (3 << 13) +# define PLL_LOAD_PULSE_PHASE_SHIFT 9 +/* + * Parallel to Serial Load Pulse phase selection. + * Selects the phase for the 10X DPLL clock for the PCIe + * digital display port. The range is 4 to 13; 10 or more + * is just a flip delay. The default is 6 + */ +# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) +# define DISPLAY_RATE_SELECT_FPA1 (1 << 8) + +/** + * SDVO multiplier for 945G/GM. Not used on 965. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +# define SDVO_MULTIPLIER_MASK 0x000000ff +# define SDVO_MULTIPLIER_SHIFT_HIRES 4 +# define SDVO_MULTIPLIER_SHIFT_VGA 0 + +/** @defgroup DPLL_MD + * @{ + */ +/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_A_MD 0x0601c +/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_B_MD 0x06020 +/** + * UDI pixel divider, controlling how many pixels are stuffed into a packet. + * + * Value is pixels minus 1. Must be set to 1 pixel for SDVO. + */ +# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 +# define DPLL_MD_UDI_DIVIDER_SHIFT 24 +/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 +# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 +/** + * SDVO/UDI pixel multiplier. + * + * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus + * clock rate is 10 times the DPLL clock. At low resolution/refresh rate + * modes, the bus rate would be below the limits, so SDVO allows for stuffing + * dummy bytes in the datastream at an increased clock rate, with both sides of + * the link knowing how many bytes are fill. + * + * So, for a mode with a dotclock of 65Mhz, we would want to double the clock + * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be + * set to 130Mhz, and the SDVO multiplier set to 2x in this register and + * through an SDVO command. + * + * This register field has values of multiplication factor minus 1, with + * a maximum multiplier of 5 for SDVO. + */ +# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 +# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 +/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. + * This best be set to the default value (3) or the CRT won't work. No, + * I don't entirely understand what this does... + */ +# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f +# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 +/** @} */ + +#define DPLL_TEST 0x606c +# define DPLLB_TEST_SDVO_DIV_1 (0 << 22) +# define DPLLB_TEST_SDVO_DIV_2 (1 << 22) +# define DPLLB_TEST_SDVO_DIV_4 (2 << 22) +# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) +# define DPLLB_TEST_N_BYPASS (1 << 19) +# define DPLLB_TEST_M_BYPASS (1 << 18) +# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) +# define DPLLA_TEST_N_BYPASS (1 << 3) +# define DPLLA_TEST_M_BYPASS (1 << 2) +# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) + +#define ADPA 0x61100 +#define ADPA_DAC_ENABLE (1<<31) +#define ADPA_DAC_DISABLE 0 +#define ADPA_PIPE_SELECT_MASK (1<<30) +#define ADPA_PIPE_A_SELECT 0 +#define ADPA_PIPE_B_SELECT (1<<30) +#define ADPA_USE_VGA_HVPOLARITY (1<<15) +#define ADPA_SETS_HVPOLARITY 0 +#define ADPA_VSYNC_CNTL_DISABLE (1<<11) +#define ADPA_VSYNC_CNTL_ENABLE 0 +#define ADPA_HSYNC_CNTL_DISABLE (1<<10) +#define ADPA_HSYNC_CNTL_ENABLE 0 +#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) +#define ADPA_VSYNC_ACTIVE_LOW 0 +#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) +#define ADPA_HSYNC_ACTIVE_LOW 0 + +#define FPA0 0x06040 +#define FPA1 0x06044 +#define FPB0 0x06048 +#define FPB1 0x0604c +# define FP_N_DIV_MASK 0x003f0000 +# define FP_N_DIV_SHIFT 16 +# define FP_M1_DIV_MASK 0x00003f00 +# define FP_M1_DIV_SHIFT 8 +# define FP_M2_DIV_MASK 0x0000003f +# define FP_M2_DIV_SHIFT 0 + + +#define PORT_HOTPLUG_EN 0x61110 +# define SDVOB_HOTPLUG_INT_EN (1 << 26) +# define SDVOC_HOTPLUG_INT_EN (1 << 25) +# define TV_HOTPLUG_INT_EN (1 << 18) +# define CRT_HOTPLUG_INT_EN (1 << 9) +# define CRT_HOTPLUG_FORCE_DETECT (1 << 3) + +#define PORT_HOTPLUG_STAT 0x61114 +# define CRT_HOTPLUG_INT_STATUS (1 << 11) +# define TV_HOTPLUG_INT_STATUS (1 << 10) +# define CRT_HOTPLUG_MONITOR_MASK (3 << 8) +# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) +# define CRT_HOTPLUG_MONITOR_MONO (2 << 8) +# define CRT_HOTPLUG_MONITOR_NONE (0 << 8) +# define SDVOC_HOTPLUG_INT_STATUS (1 << 7) +# define SDVOB_HOTPLUG_INT_STATUS (1 << 6) + +#define SDVOB 0x61140 +#define SDVOC 0x61160 +#define SDVO_ENABLE (1 << 31) +#define SDVO_PIPE_B_SELECT (1 << 30) +#define SDVO_STALL_SELECT (1 << 29) +#define SDVO_INTERRUPT_ENABLE (1 << 26) +/** + * 915G/GM SDVO pixel multiplier. + * + * Programmed value is multiplier - 1, up to 5x. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +#define SDVO_PORT_MULTIPLY_MASK (7 << 23) +#define SDVO_PORT_MULTIPLY_SHIFT 23 +#define SDVO_PHASE_SELECT_MASK (15 << 19) +#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) +#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) +#define SDVOC_GANG_MODE (1 << 16) +#define SDVO_BORDER_ENABLE (1 << 7) +#define SDVOB_PCIE_CONCURRENCY (1 << 3) +#define SDVO_DETECTED (1 << 2) +/* Bits to be preserved when writing */ +#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) +#define SDVOC_PRESERVE_MASK (1 << 17) + +/** @defgroup LVDS + * @{ + */ +/** + * This register controls the LVDS output enable, pipe selection, and data + * format selection. + * + * All of the clock/data pairs are force powered down by power sequencing. + */ +#define LVDS 0x61180 +/** + * Enables the LVDS port. This bit must be set before DPLLs are enabled, as + * the DPLL semantics change when the LVDS is assigned to that pipe. + */ +# define LVDS_PORT_EN (1 << 31) +/** Selects pipe B for LVDS data. Must be set on pre-965. */ +# define LVDS_PIPEB_SELECT (1 << 30) + +/** + * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per + * pixel. + */ +# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) +# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) +# define LVDS_A0A2_CLKA_POWER_UP (3 << 8) +/** + * Controls the A3 data pair, which contains the additional LSBs for 24 bit + * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be + * on. + */ +# define LVDS_A3_POWER_MASK (3 << 6) +# define LVDS_A3_POWER_DOWN (0 << 6) +# define LVDS_A3_POWER_UP (3 << 6) +/** + * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP + * is set. + */ +# define LVDS_CLKB_POWER_MASK (3 << 4) +# define LVDS_CLKB_POWER_DOWN (0 << 4) +# define LVDS_CLKB_POWER_UP (3 << 4) + +/** + * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 + * setting for whether we are in dual-channel mode. The B3 pair will + * additionally only be powered up when LVDS_A3_POWER_UP is set. + */ +# define LVDS_B0B3_POWER_MASK (3 << 2) +# define LVDS_B0B3_POWER_DOWN (0 << 2) +# define LVDS_B0B3_POWER_UP (3 << 2) + +#define PIPEACONF 0x70008 +#define PIPEACONF_ENABLE (1<<31) +#define PIPEACONF_DISABLE 0 +#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define I965_PIPECONF_ACTIVE (1<<30) +#define PIPEACONF_SINGLE_WIDE 0 +#define PIPEACONF_PIPE_UNLOCKED 0 +#define PIPEACONF_PIPE_LOCKED (1<<25) +#define PIPEACONF_PALETTE 0 +#define PIPEACONF_GAMMA (1<<24) +#define PIPECONF_FORCE_BORDER (1<<25) +#define PIPECONF_PROGRESSIVE (0 << 21) +#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) +#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) + +#define PIPEBCONF 0x71008 +#define PIPEBCONF_ENABLE (1<<31) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_DOUBLE_WIDE (1<<30) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_GAMMA (1<<24) +#define PIPEBCONF_PALETTE 0 + +#define PIPEBGCMAXRED 0x71010 +#define PIPEBGCMAXGREEN 0x71014 +#define PIPEBGCMAXBLUE 0x71018 +#define PIPEBSTAT 0x71024 +#define PIPEBFRAMEHIGH 0x71040 +#define PIPEBFRAMEPIXEL 0x71044 + +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DISPLAY_PLANE_ENABLE (1<<31) +#define DISPLAY_PLANE_DISABLE 0 +#define DISPPLANE_GAMMA_ENABLE (1<<30) +#define DISPPLANE_GAMMA_DISABLE 0 +#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) +#define DISPPLANE_8BPP (0x2<<26) +#define DISPPLANE_15_16BPP (0x4<<26) +#define DISPPLANE_16BPP (0x5<<26) +#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) +#define DISPPLANE_32BPP (0x7<<26) +#define DISPPLANE_STEREO_ENABLE (1<<25) +#define DISPPLANE_STEREO_DISABLE 0 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) +#define DISPPLANE_SEL_PIPE_A 0 +#define DISPPLANE_SEL_PIPE_B (1<<24) +#define DISPPLANE_SRC_KEY_ENABLE (1<<22) +#define DISPPLANE_SRC_KEY_DISABLE 0 +#define DISPPLANE_LINE_DOUBLE (1<<20) +#define DISPPLANE_NO_LINE_DOUBLE 0 +#define DISPPLANE_STEREO_POLARITY_FIRST 0 +#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +/* plane B only */ +#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) +#define DISPPLANE_ALPHA_TRANS_DISABLE 0 +#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 +#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) + +#define DSPABASE 0x70184 +#define DSPASTRIDE 0x70188 + +#define DSPBBASE 0x71184 +#define DSPBADDR DSPBBASE +#define DSPBSTRIDE 0x71188 + +#define DSPAKEYVAL 0x70194 +#define DSPAKEYMASK 0x70198 + +#define DSPAPOS 0x7018C /* reserved */ +#define DSPASIZE 0x70190 +#define DSPBPOS 0x7118C +#define DSPBSIZE 0x71190 + +#define DSPASURF 0x7019C +#define DSPATILEOFF 0x701A4 + +#define DSPBSURF 0x7119C +#define DSPBTILEOFF 0x711A4 + +#define VGACNTRL 0x71400 +# define VGA_DISP_DISABLE (1 << 31) +# define VGA_2X_MODE (1 << 30) +# define VGA_PIPE_B_SELECT (1 << 29) + +/* + * Palette registers + */ +#define PALETTE_A 0x0a000 +#define PALETTE_B 0x0a800 + +#define IS_I830(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82830_CGC) +#define IS_845G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82845G_IG) +#define IS_I85X(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG) +#define IS_I855(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG) +#define IS_I865G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82865_IG) + +#define IS_I915G(pI810) (dev->pci_device == PCI_DEVICE_ID_INTEL_82915G_IG)/* || dev->pci_device == PCI_DEVICE_ID_INTELPCI_CHIP_E7221_G)*/ +#define IS_I915GM(pI810) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82915GM_IG) +#define IS_I945G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945G_IG) +#define IS_I945GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945GM_IG) + +#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \ + (dev)->pci_device == 0x2982 || \ + (dev)->pci_device == 0x2992 || \ + (dev)->pci_device == 0x29A2) + + +#define IS_I9XX(pI810) (IS_I915G(pI810) || IS_I915GM(pI810) || IS_I945G(pI810) || IS_I945GM(pI810) || IS_I965G(pI810)) + +#define IS_MOBILE(pI810) (IS_I830(pI810) || IS_I85X(pI810) || IS_I915GM(pI810) || IS_I945GM(pI810)) + #endif -- 2.7.4