From 528a97e9b6c0e3657df179822fef386f895b3c58 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 23 Feb 2018 18:16:27 +0800 Subject: [PATCH] arm: dts: mt7623: fix the regulators mmc should use on bananapi-r2 Both mmc devices on bananapi-r2 board should all use the fixed regulators as their power source instead of PMIC MT6323 exports. Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 7de7045..12da146 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -39,6 +39,15 @@ }; }; + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -209,8 +218,8 @@ bus-width = <8>; max-frequency = <50000000>; cap-mmc-highspeed; - vmmc-supply = <&mt6323_vemc3v3_reg>; - vqmmc-supply = <&mt6323_vio18_reg>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; non-removable; }; @@ -223,8 +232,8 @@ max-frequency = <50000000>; cap-sd-highspeed; cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; - vmmc-supply = <&mt6323_vmch_reg>; - vqmmc-supply = <&mt6323_vio18_reg>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; }; &pio { -- 2.7.4