From 520d68e7cf6c72687698c4584e8f1f8fab4dfc4e Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Wed, 6 Aug 2014 10:31:53 +0300 Subject: [PATCH] wil6210: wait longer for hardware reset completion Typical time for hardware reset, as measured, is about 200..250 msec. Adjust sleeping to use more relaxed msleep, increase sleep interval and increase total sleep time to be about 1sec Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville --- drivers/net/wireless/ath/wil6210/main.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 5a99342..b69d90f 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -25,6 +25,9 @@ static bool no_fw_recovery; module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(no_fw_recovery, " disable FW error recovery"); +#define RST_DELAY (20) /* msec, for loop in @wil_target_reset */ +#define RST_COUNT (1 + 1000/RST_DELAY) /* round up to be above 1 sec total */ + /* * Due to a hardware issue, * one has to read/write to/from NIC in 32-bit chunks; @@ -388,11 +391,11 @@ static int wil_target_reset(struct wil6210_priv *wil) W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0); wmb(); /* order is important here */ - /* wait until device ready */ + /* wait until device ready. typical time is 200..250 msec */ do { - msleep(1); + msleep(RST_DELAY); hw_state = R(RGF_USER_HW_MACHINE_STATE); - if (delay++ > 100) { + if (delay++ > RST_COUNT) { wil_err(wil, "Reset not completed, hw_state 0x%08x\n", hw_state); return -ETIME; @@ -406,7 +409,7 @@ static int wil_target_reset(struct wil6210_priv *wil) C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); wmb(); /* order is important here */ - wil_dbg_misc(wil, "Reset completed in %d ms\n", delay); + wil_dbg_misc(wil, "Reset completed in %d ms\n", delay * RST_DELAY); return 0; #undef R -- 2.7.4