From 5197424cdcccd2b0b1922babb93969b2515c43ce Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Thu, 4 Feb 2010 00:17:18 -0800 Subject: [PATCH] Input: usbtouchscreen - add NEXIO (or iNexio) support MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Add support for NEXIO (or iNexio) USB touchscreens to usbtouchscreen driver. Tested with NEX170MRT 17" LCD monitor with integrated touchscreen (with xserver-xorg-input-evtouch 0.8.8-1): T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 54 Spd=12  MxCh= 0 D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1 P:  Vendor=1870 ProdID=0001 Rev= 1.00 S:  Manufacturer=iNexio S:  Product=iNexio USB C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=00 Driver=(none) E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=255ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms No datasheet is available, this was written by capturing some data with SniffUSB in Windows: http://www.rainbow-software.org/linux_files/nexio/ Signed-off-by: Ondrej Zary Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 5 + drivers/input/touchscreen/usbtouchscreen.c | 261 ++++++++++++++++++++++++++++- 2 files changed, 264 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index dfafc76..a1e2d84 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -537,6 +537,11 @@ config TOUCHSCREEN_USB_ETT_TC5UH bool "ET&T TC5UH touchscreen controler support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_NEXIO + default y + bool "NEXIO/iNexio device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index a2a8235..07656ef 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -15,6 +15,7 @@ * - GoTop Super_Q2/GogoPen/PenPower tablets * - JASTEC USB touch controller/DigiTech DTR-02U * - Zytronic capacitive touchscreen + * - NEXIO/iNexio * * Copyright (C) 2004-2007 by Daniel Ritz * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -95,6 +96,7 @@ struct usbtouch_device_info { int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); int (*init) (struct usbtouch_usb *usbtouch); + void (*exit) (struct usbtouch_usb *usbtouch); }; /* a usbtouch device */ @@ -109,6 +111,7 @@ struct usbtouch_usb { struct usbtouch_device_info *type; char name[128]; char phys[64]; + void *priv; int x, y; int touch, press; @@ -133,6 +136,7 @@ enum { DEVTYPE_E2I, DEVTYPE_ZYTRONIC, DEVTYPE_TC5UH, + DEVTYPE_NEXIO, }; #define USB_DEVICE_HID_CLASS(vend, prod) \ @@ -222,6 +226,14 @@ static const struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH}, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + /* data interface only */ + {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00), + .driver_info = DEVTYPE_NEXIO}, + {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00), + .driver_info = DEVTYPE_NEXIO}, +#endif + {} }; @@ -692,6 +704,229 @@ static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #endif /***************************************************************************** + * NEXIO Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + +#define NEXIO_TIMEOUT 5000 +#define NEXIO_BUFSIZE 1024 +#define NEXIO_THRESHOLD 50 + +struct nexio_priv { + struct urb *ack; + unsigned char *ack_buf; +}; + +struct nexio_touch_packet { + u8 flags; /* 0xe1 = touch, 0xe1 = release */ + __be16 data_len; /* total bytes of touch data */ + __be16 x_len; /* bytes for X axis */ + __be16 y_len; /* bytes for Y axis */ + u8 data[]; +} __attribute__ ((packed)); + +static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 }; +static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f }; + +static void nexio_ack_complete(struct urb *urb) +{ +} + +static int nexio_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *dev = interface_to_usbdev(usbtouch->interface); + struct usb_host_interface *interface = usbtouch->interface->cur_altsetting; + struct nexio_priv *priv; + int ret = -ENOMEM; + int actual_len, i; + unsigned char *buf; + char *firmware_ver = NULL, *device_name = NULL; + int input_ep = 0, output_ep = 0; + + /* find first input and output endpoint */ + for (i = 0; i < interface->desc.bNumEndpoints; i++) { + if (!input_ep && + usb_endpoint_dir_in(&interface->endpoint[i].desc)) + input_ep = interface->endpoint[i].desc.bEndpointAddress; + if (!output_ep && + usb_endpoint_dir_out(&interface->endpoint[i].desc)) + output_ep = interface->endpoint[i].desc.bEndpointAddress; + } + if (!input_ep || !output_ep) + return -ENXIO; + + buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL); + if (!buf) + goto out_buf; + + /* two empty reads */ + for (i = 0; i < 2; i++) { + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), + buf, NEXIO_BUFSIZE, &actual_len, + NEXIO_TIMEOUT); + if (ret < 0) + goto out_buf; + } + + /* send init command */ + memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt)); + ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep), + buf, sizeof(nexio_init_pkt), &actual_len, + NEXIO_TIMEOUT); + if (ret < 0) + goto out_buf; + + /* read replies */ + for (i = 0; i < 3; i++) { + memset(buf, 0, NEXIO_BUFSIZE); + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), + buf, NEXIO_BUFSIZE, &actual_len, + NEXIO_TIMEOUT); + if (ret < 0 || actual_len < 1 || buf[1] != actual_len) + continue; + switch (buf[0]) { + case 0x83: /* firmware version */ + if (!firmware_ver) + firmware_ver = kstrdup(&buf[2], GFP_KERNEL); + break; + case 0x84: /* device name */ + if (!device_name) + device_name = kstrdup(&buf[2], GFP_KERNEL); + break; + } + } + + printk(KERN_INFO "Nexio device: %s, firmware version: %s\n", + device_name, firmware_ver); + + kfree(firmware_ver); + kfree(device_name); + + /* prepare ACK URB */ + ret = -ENOMEM; + + usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL); + if (!usbtouch->priv) + goto out_buf; + + priv = usbtouch->priv; + + priv->ack_buf = kmalloc(sizeof(nexio_ack_pkt), GFP_KERNEL); + if (!priv->ack_buf) + goto err_priv; + + memcpy(priv->ack_buf, nexio_ack_pkt, sizeof(nexio_ack_pkt)); + + priv->ack = usb_alloc_urb(0, GFP_KERNEL); + if (!priv->ack) { + dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__); + goto err_ack_buf; + } + + usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep), + priv->ack_buf, sizeof(nexio_ack_pkt), + nexio_ack_complete, usbtouch); + ret = 0; + goto out_buf; + +err_ack_buf: + kfree(priv->ack_buf); +err_priv: + kfree(priv); +out_buf: + kfree(buf); + return ret; +} + +static void nexio_exit(struct usbtouch_usb *usbtouch) +{ + struct nexio_priv *priv = usbtouch->priv; + + usb_kill_urb(priv->ack); + usb_free_urb(priv->ack); + kfree(priv->ack_buf); + kfree(priv); +} + +static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) +{ + int x, y, begin_x, begin_y, end_x, end_y, w, h, ret; + struct nexio_touch_packet *packet = (void *) pkt; + struct nexio_priv *priv = usbtouch->priv; + + /* got touch data? */ + if ((pkt[0] & 0xe0) != 0xe0) + return 0; + + /* send ACK */ + ret = usb_submit_urb(priv->ack, GFP_ATOMIC); + + if (!usbtouch->type->max_xc) { + usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len); + input_set_abs_params(usbtouch->input, ABS_X, 0, + 2 * be16_to_cpu(packet->x_len), 0, 0); + usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len); + input_set_abs_params(usbtouch->input, ABS_Y, 0, + 2 * be16_to_cpu(packet->y_len), 0, 0); + } + /* + * The device reports state of IR sensors on X and Y axes. + * Each byte represents "darkness" percentage (0-100) of one element. + * 17" touchscreen reports only 64 x 52 bytes so the resolution is low. + * This also means that there's a limited multi-touch capability but + * it's disabled (and untested) here as there's no X driver for that. + */ + begin_x = end_x = begin_y = end_y = -1; + for (x = 0; x < be16_to_cpu(packet->x_len); x++) { + if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) { + begin_x = x; + continue; + } + if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) { + end_x = x - 1; + for (y = be16_to_cpu(packet->x_len); + y < be16_to_cpu(packet->data_len); y++) { + if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) { + begin_y = y - be16_to_cpu(packet->x_len); + continue; + } + if (end_y == -1 && + begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) { + end_y = y - 1 - be16_to_cpu(packet->x_len); + w = end_x - begin_x; + h = end_y - begin_y; +#if 0 + /* multi-touch */ + input_report_abs(usbtouch->input, + ABS_MT_TOUCH_MAJOR, max(w,h)); + input_report_abs(usbtouch->input, + ABS_MT_TOUCH_MINOR, min(x,h)); + input_report_abs(usbtouch->input, + ABS_MT_POSITION_X, 2*begin_x+w); + input_report_abs(usbtouch->input, + ABS_MT_POSITION_Y, 2*begin_y+h); + input_report_abs(usbtouch->input, + ABS_MT_ORIENTATION, w > h); + input_mt_sync(usbtouch->input); +#endif + /* single touch */ + usbtouch->x = 2 * begin_x + w; + usbtouch->y = 2 * begin_y + h; + usbtouch->touch = packet->flags & 0x01; + begin_y = end_y = -1; + return 1; + } + } + begin_x = end_x = -1; + } + + } + return 0; +} +#endif + + +/***************************************************************************** * the different device descriptors */ #ifdef MULTI_PACKET @@ -875,6 +1110,16 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .read_data = tc5uh_read_data, }, #endif + +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + [DEVTYPE_NEXIO] = { + .rept_size = 128, + .irq_always = true, + .read_data = nexio_read_data, + .init = nexio_init, + .exit = nexio_exit, + }, +#endif }; @@ -1000,6 +1245,7 @@ static void usbtouch_irq(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: + case -EPIPE: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", __func__, urb->status); @@ -1146,10 +1392,16 @@ static int usbtouch_probe(struct usb_interface *intf, input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press, type->max_press, 0, 0); - usb_fill_int_urb(usbtouch->irq, udev, + if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT) + usb_fill_int_urb(usbtouch->irq, udev, usb_rcvintpipe(udev, endpoint->bEndpointAddress), usbtouch->data, type->rept_size, usbtouch_irq, usbtouch, endpoint->bInterval); + else + usb_fill_bulk_urb(usbtouch->irq, udev, + usb_rcvbulkpipe(udev, endpoint->bEndpointAddress), + usbtouch->data, type->rept_size, + usbtouch_irq, usbtouch); usbtouch->irq->dev = udev; usbtouch->irq->transfer_dma = usbtouch->data_dma; @@ -1167,7 +1419,7 @@ static int usbtouch_probe(struct usb_interface *intf, err = input_register_device(usbtouch->input); if (err) { dbg("%s - input_register_device failed, err: %d", __func__, err); - goto out_free_buffers; + goto out_do_exit; } usb_set_intfdata(intf, usbtouch); @@ -1177,6 +1429,9 @@ static int usbtouch_probe(struct usb_interface *intf, return 0; +out_do_exit: + if (type->exit) + type->exit(usbtouch); out_free_buffers: usbtouch_free_buffers(udev, usbtouch); out_free: @@ -1199,6 +1454,8 @@ static void usbtouch_disconnect(struct usb_interface *intf) /* this will stop IO via close */ input_unregister_device(usbtouch->input); usb_free_urb(usbtouch->irq); + if (usbtouch->type->exit) + usbtouch->type->exit(usbtouch); usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch); kfree(usbtouch); } -- 2.7.4