From 50d5c60634673a79f8d88564e10345b50fca7378 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 16 Dec 2009 18:55:26 +0530 Subject: [PATCH] [SCSI] mpt2sas: Added phy_enable and set_phy_speed sysfs callback support. Added new callbacks phy_enable and set_phy_speed in the mpt2sas_transport_functions template. This will allow end user to enable/disable phys and change links rates using the SysFS interface. Current implementation only supports direct attached phys, but we could in the future add support for expander based phys. A new subroutine mpt2sas_config_set_sas_iounit_pg1 was added; this wrapper function used to send request to controller firmware to modify the phys and link rates. A new subroutine _transport_find_local_phy was added; a function for easly obtaining the local phy object for direct attached. Example to disable a phy echo 0 > /sys/class/phy3:0/enable Example to enable the same phy echo 1 > /sys/class/phy3:0/enable Example to change the link rate to 1.5 #echo "1.5 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 1.5 Gbit Example to change the link rate to 3.0 #echo "3.0 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 3.0 Gbit Example to change the link rate to 6.0 #echo "6.0 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 6.0 Gbit Signed-off-by: Kashyap Desai Reviewed-by: Eric Moore Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 2 + drivers/scsi/mpt2sas/mpt2sas_config.c | 51 +++++++- drivers/scsi/mpt2sas/mpt2sas_transport.c | 196 ++++++++++++++++++++++++++++--- 3 files changed, 232 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 014318f..93c067f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -853,6 +853,8 @@ int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page); int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); +int mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page); int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c index 594a389..411c27d 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_config.c +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -324,7 +324,9 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t if (r != 0) goto out; if (mpi_request->Action == - MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT) { + MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT || + mpi_request->Action == + MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) { ioc->base_add_sg_single(&mpi_request->PageBufferSGE, MPT2_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz, mem.page_dma); @@ -882,7 +884,7 @@ mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t } /** - * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 0 + * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page @@ -907,7 +909,7 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; mpi_request.Header.PageNumber = 1; - mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION; mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); @@ -922,6 +924,49 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t } /** + * mpt2sas_config_set_sas_iounit_pg1 - send sas iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Calling function should call config_get_number_hba_phys prior to + * this function, so enough memory is allocated for config_page. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); + out: + return r; +} + +/** * mpt2sas_config_get_expander_pg0 - obtain expander page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index 3a82872..789f9ee 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -855,6 +855,17 @@ rphy_to_ioc(struct sas_rphy *rphy) return shost_priv(shost); } +static struct _sas_phy * +_transport_find_local_phy(struct MPT2SAS_ADAPTER *ioc, struct sas_phy *phy) +{ + int i; + + for (i = 0; i < ioc->sas_hba.num_phys; i++) + if (ioc->sas_hba.phy[i].phy == phy) + return(&ioc->sas_hba.phy[i]); + return NULL; +} + /** * _transport_get_linkerrors - * @phy: The sas phy object @@ -870,14 +881,8 @@ _transport_get_linkerrors(struct sas_phy *phy) struct _sas_phy *mpt2sas_phy; Mpi2ConfigReply_t mpi_reply; Mpi2SasPhyPage1_t phy_pg1; - int i; - for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys && - !mpt2sas_phy; i++) { - if (ioc->sas_hba.phy[i].phy != phy) - continue; - mpt2sas_phy = &ioc->sas_hba.phy[i]; - } + mpt2sas_phy = _transport_find_local_phy(ioc, phy); if (!mpt2sas_phy) /* this phy not on sas_host */ return -EINVAL; @@ -971,14 +976,8 @@ _transport_phy_reset(struct sas_phy *phy, int hard_reset) struct _sas_phy *mpt2sas_phy; Mpi2SasIoUnitControlReply_t mpi_reply; Mpi2SasIoUnitControlRequest_t mpi_request; - int i; - for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys && - !mpt2sas_phy; i++) { - if (ioc->sas_hba.phy[i].phy != phy) - continue; - mpt2sas_phy = &ioc->sas_hba.phy[i]; - } + mpt2sas_phy = _transport_find_local_phy(ioc, phy); if (!mpt2sas_phy) /* this phy not on sas_host */ return -EINVAL; @@ -1006,6 +1005,173 @@ _transport_phy_reset(struct sas_phy *phy, int hard_reset) } /** + * _transport_phy_enable - enable/disable phys + * @phy: The sas phy object + * @enable: enable phy when true + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_phy_enable(struct sas_phy *phy, int enable) +{ + struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy); + struct _sas_phy *mpt2sas_phy; + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 sz; + int rc = 0; + + mpt2sas_phy = _transport_find_local_phy(ioc, phy); + + if (!mpt2sas_phy) /* this phy not on sas_host */ + return -EINVAL; + + /* sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENOMEM; + goto out; + } + if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -EIO; + goto out; + } + + if (enable) + sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags + &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; + else + sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags + |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; + + mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz); + + out: + kfree(sas_iounit_pg1); + return rc; +} + +/** + * _transport_phy_speed - set phy min/max link rates + * @phy: The sas phy object + * @rates: rates defined in sas_phy_linkrates + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) +{ + struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy); + struct _sas_phy *mpt2sas_phy; + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasPhyPage0_t phy_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 sz; + int i; + int rc = 0; + + mpt2sas_phy = _transport_find_local_phy(ioc, phy); + + if (!mpt2sas_phy) /* this phy not on sas_host */ + return -EINVAL; + + if (!rates->minimum_linkrate) + rates->minimum_linkrate = phy->minimum_linkrate; + else if (rates->minimum_linkrate < phy->minimum_linkrate_hw) + rates->minimum_linkrate = phy->minimum_linkrate_hw; + + if (!rates->maximum_linkrate) + rates->maximum_linkrate = phy->maximum_linkrate; + else if (rates->maximum_linkrate > phy->maximum_linkrate_hw) + rates->maximum_linkrate = phy->maximum_linkrate_hw; + + /* sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENOMEM; + goto out; + } + if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -EIO; + goto out; + } + + for (i = 0; i < ioc->sas_hba.num_phys; i++) { + if (mpt2sas_phy->phy_id != i) { + sas_iounit_pg1->PhyData[i].MaxMinLinkRate = + (ioc->sas_hba.phy[i].phy->minimum_linkrate + + (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4)); + } else { + sas_iounit_pg1->PhyData[i].MaxMinLinkRate = + (rates->minimum_linkrate + + (rates->maximum_linkrate << 4)); + } + } + + if (mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, + sz)) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + + /* link reset */ + _transport_phy_reset(phy, 0); + + /* read phy page 0, then update the rates in the sas transport phy */ + if (!mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, + mpt2sas_phy->phy_id)) { + phy->minimum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate >> 4); + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + phy_pg0.NegotiatedLinkRate & + MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + } + + out: + kfree(sas_iounit_pg1); + return rc; +} + + +/** * _transport_smp_handler - transport portal for smp passthru * @shost: shost object * @rphy: sas transport rphy object @@ -1207,6 +1373,8 @@ struct sas_function_template mpt2sas_transport_functions = { .get_enclosure_identifier = _transport_get_enclosure_identifier, .get_bay_identifier = _transport_get_bay_identifier, .phy_reset = _transport_phy_reset, + .phy_enable = _transport_phy_enable, + .set_phy_speed = _transport_phy_speed, .smp_handler = _transport_smp_handler, }; -- 2.7.4