From 4fb3925ff8b64422eb904c630e914c29ed824e85 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 4 Apr 2014 15:25:06 +0900 Subject: [PATCH] powerpc: remove RPXClassic, RPXlite boards support Enough time has passed since these boards were moved to Orphan. Remove. - Remove board/RPXlite/* - Remove board/RPXClassic/* - Remove include/configs/RPXlite.h - Remove include/configs/RPXClassic.h - Clean-up defined(CONFIG_RPXCLASSIC) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada --- arch/powerpc/cpu/mpc8xx/cpu_init.c | 5 - arch/powerpc/cpu/mpc8xx/scc.c | 7 - arch/powerpc/cpu/mpc8xx/serial.c | 2 +- board/RPXClassic/Makefile | 8 - board/RPXClassic/README | 19 - board/RPXClassic/RPXClassic.c | 260 ----------- board/RPXClassic/eccx.c | 335 -------------- board/RPXClassic/flash.c | 431 ------------------ board/RPXClassic/u-boot.lds | 82 ---- board/RPXClassic/u-boot.lds.debug | 121 ----- board/RPXlite/Makefile | 8 - board/RPXlite/README | 877 ------------------------------------- board/RPXlite/README.PlanetCore | 163 ------- board/RPXlite/RPXlite.c | 149 ------- board/RPXlite/flash.c | 508 --------------------- board/RPXlite/u-boot.lds | 82 ---- board/RPXlite/u-boot.lds.debug | 121 ----- boards.cfg | 2 - doc/README.scrapyard | 2 + drivers/pcmcia/mpc8xx_pcmcia.c | 2 +- drivers/pcmcia/rpx_pcmcia.c | 4 +- include/common.h | 4 - include/commproc.h | 35 -- include/configs/RPXClassic.h | 483 -------------------- include/configs/RPXlite.h | 395 ----------------- include/pcmcia.h | 2 +- post/cpu/mpc8xx/ether.c | 7 - post/cpu/mpc8xx/uart.c | 2 +- 28 files changed, 8 insertions(+), 4108 deletions(-) delete mode 100644 board/RPXClassic/Makefile delete mode 100644 board/RPXClassic/README delete mode 100644 board/RPXClassic/RPXClassic.c delete mode 100644 board/RPXClassic/eccx.c delete mode 100644 board/RPXClassic/flash.c delete mode 100644 board/RPXClassic/u-boot.lds delete mode 100644 board/RPXClassic/u-boot.lds.debug delete mode 100644 board/RPXlite/Makefile delete mode 100644 board/RPXlite/README delete mode 100644 board/RPXlite/README.PlanetCore delete mode 100644 board/RPXlite/RPXlite.c delete mode 100644 board/RPXlite/flash.c delete mode 100644 board/RPXlite/u-boot.lds delete mode 100644 board/RPXlite/u-boot.lds.debug delete mode 100644 include/configs/RPXClassic.h delete mode 100644 include/configs/RPXlite.h diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index 69455c7..9c3102d 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -138,7 +138,6 @@ void cpu_init_f (volatile immap_t * immr) defined(CONFIG_MHPC) || \ defined(CONFIG_R360MPI) || \ defined(CONFIG_RMU) || \ - defined(CONFIG_RPXCLASSIC) || \ defined(CONFIG_RPXLITE) || \ defined(CONFIG_SPC1920) || \ defined(CONFIG_SPD823TS) @@ -207,10 +206,6 @@ void cpu_init_f (volatile immap_t * immr) __asm__ ("eieio"); } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); -#ifdef CONFIG_RPXCLASSIC - rpxclassic_init (); -#endif - #if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM) rpxlite_init (); #endif diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c index 647f058..5da6973 100644 --- a/arch/powerpc/cpu/mpc8xx/scc.c +++ b/arch/powerpc/cpu/mpc8xx/scc.c @@ -461,11 +461,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) #error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined #endif -#ifdef CONFIG_RPXCLASSIC - *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK; - *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX); -#endif - #ifdef CONFIG_RPXLITE *((uchar *) BCSR0) |= BCSR0_ETHEN; #endif @@ -512,8 +507,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) */ #if defined (CONFIG_FADS) udelay (10000); /* wait 10 ms */ -#elif defined(CONFIG_RPXCLASSIC) - udelay (100000); /* wait 100 ms */ #endif return 1; diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c index f7ca11e..9321411 100644 --- a/arch/powerpc/cpu/mpc8xx/serial.c +++ b/arch/powerpc/cpu/mpc8xx/serial.c @@ -182,7 +182,7 @@ static int smc_init (void) #endif #endif /* CONFIG_FADS */ -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) +#if defined(CONFIG_RPXLITE) /* Enable Monitor Port Transceiver */ *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ; #endif /* CONFIG_RPXLITE */ diff --git a/board/RPXClassic/Makefile b/board/RPXClassic/Makefile deleted file mode 100644 index 87db754..0000000 --- a/board/RPXClassic/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = RPXClassic.o flash.o eccx.o diff --git a/board/RPXClassic/README b/board/RPXClassic/README deleted file mode 100644 index e03f670..0000000 --- a/board/RPXClassic/README +++ /dev/null @@ -1,19 +0,0 @@ -# Porting U-Boot onto RPXClassic LF_BW31 board -# Written by Pierre AUBERT -# E-Mail p.aubert@staubli.com -# Stäubli Faverges - -# -# Sept. 20 2001 -# -# Cross compile: Montavista Hardhat ported on HP-UX 10.20 -# - -Flash memories : AM29DL323B (2 banks flash memories) 16 Mb from 0xff000000 -DRAM : 16 Mb from 0 -NVRAM : 512 kb from 0xfa000000 - - -- environment is stored in NVRAM -- Mac address is read from EEPROM -- ethernet on SCC1 or fast ethernet on FEC are running (depending on the - configuration flag CONFIG_FEC_ENET) diff --git a/board/RPXClassic/RPXClassic.c b/board/RPXClassic/RPXClassic.c deleted file mode 100644 index 15b7232..0000000 --- a/board/RPXClassic/RPXClassic.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * (C) Copyright 2001 - * Stäubli Faverges - - * Pierre AUBERT p.aubert@staubli.com - * U-Boot port on RPXClassic LF (CLLF_BW31) board - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); -static unsigned char aschex_to_byte (unsigned char *cp); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFCC25 - -const uint sdram_table[] = -{ - /* - * Single Read. (Offset 00h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08, - 0x3FBFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Read. (Offset 08h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88, - 0x3FBFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Single Write. (Offset 18h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00, - 0x3FFFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Write. (Offset 20h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C, - 0x0CFFCC00, 0x33FFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* - * Refresh. (Offset 30h in UPMA RAM) - */ - 0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24, - 0x3FFFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Exception. (Offset 3Ch in UPMA RAM) - */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_ -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - puts ("Board: RPXClassic\n"); - return (0); -} - -/*----------------------------------------------------------------------------- - * board_get_enetaddr -- Read the MAC Address in the I2C EEPROM - *----------------------------------------------------------------------------- - */ -static void board_get_enetaddr(uchar *enet) -{ - int i; - char buff[256], *cp; - - /* Initialize I2C */ - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - /* Read 256 bytes in EEPROM */ - i2c_read (0x54, 0, 1, (uchar *)buff, 128); - i2c_read (0x54, 128, 1, (uchar *)buff + 128, 128); - - /* Retrieve MAC address in buffer (key EA) */ - for (cp = buff;;) { - if (cp[0] == 'E' && cp[1] == 'A') { - cp += 3; - /* Read MAC address */ - for (i = 0; i < 6; i++, cp += 2) { - enet[i] = aschex_to_byte ((unsigned char *)cp); - } - } - /* Scan to the end of the record */ - while ((*cp != '\n') && (*cp != (char)0xff)) { - cp++; - } - /* If the next character is a \n, 0 or ff, we are done. */ - cp++; - if ((*cp == '\n') || (*cp == 0) || (*cp == (char)0xff)) - break; - } - -#ifdef CONFIG_FEC_ENET - /* The MAC address is the same as normal ethernet except the 3rd byte */ - /* (See the E.P. Planet Core Overview manual */ - enet[3] |= 0x80; -#endif - - printf("MAC address = %pM\n", enet); -} - -int misc_init_r(void) -{ - uchar enetaddr[6]; - - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(enetaddr); - eth_setenv_enetaddr("ethaddr", enetaddr); - } - - return 0; -} - -void rpxclassic_init (void) -{ - /* Enable NVRAM */ - *((uchar *) BCSR0) |= BCSR0_ENNVRAM; - -#ifdef CONFIG_FEC_ENET - - /* Validate the fast ethernet tranceiver */ - *((volatile uchar *) BCSR2) &= ~BCSR2_MIICTL; - *((volatile uchar *) BCSR2) &= ~BCSR2_MIIPWRDWN; - *((volatile uchar *) BCSR2) |= BCSR2_MIIRST; - *((volatile uchar *) BCSR2) |= BCSR2_MIIPWRDWN; -#endif - -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size10; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* Refresh clock prescalar */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - memctl->memc_mar = 0x00000000; - - /* Map controller banks 1 to the SDRAM bank */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - refresh twice */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* Check Bank 0 Memory Size - * try 10 column mode - */ - - size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM, - SDRAM_MAX_SIZE); - - return (size10); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} -/*----------------------------------------------------------------------------- - * aschex_to_byte -- - *----------------------------------------------------------------------------- - */ -static unsigned char aschex_to_byte (unsigned char *cp) -{ - u_char byte, c; - - c = *cp++; - - if ((c >= 'A') && (c <= 'F')) { - c -= 'A'; - c += 10; - } else if ((c >= 'a') && (c <= 'f')) { - c -= 'a'; - c += 10; - } else { - c -= '0'; - } - - byte = c * 16; - - c = *cp; - - if ((c >= 'A') && (c <= 'F')) { - c -= 'A'; - c += 10; - } else if ((c >= 'a') && (c <= 'f')) { - c -= 'a'; - c += 10; - } else { - c -= '0'; - } - - byte += c; - - return (byte); -} diff --git a/board/RPXClassic/eccx.c b/board/RPXClassic/eccx.c deleted file mode 100644 index 766a19e..0000000 --- a/board/RPXClassic/eccx.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - * (C) Copyright 2002 - * Stäubli Faverges - - * Pierre AUBERT p.aubert@staubli.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* Video support for the ECCX daughter board */ - - -#include -#include - -#ifdef CONFIG_VIDEO_SED13806 -#include - - -/* Screen configurations: the initialization of the SD13806 depends on - screen and on display mode. We handle only 8bpp and 16 bpp modes */ - -/* ECCX board is supplied with a NEC NL6448BC20 screen */ -#ifdef CONFIG_NEC_NL6448BC20 -#define DISPLAY_WIDTH 640 -#define DISPLAY_HEIGHT 480 - -#ifdef CONFIG_VIDEO_SED13806_8BPP -static const S1D_REGS init_regs [] = -{ - {0x0001,0x00}, /* Miscellaneous Register */ - {0x01FC,0x00}, /* Display Mode Register */ - {0x0004,0x1b}, /* General IO Pins Configuration Register 0 */ - {0x0005,0x00}, /* General IO Pins Configuration Register 1 */ - {0x0008,0xe5}, /* General IO Pins Control Register 0 */ - {0x0009,0x1f}, /* General IO Pins Control Register 1 */ - {0x0010,0x02}, /* Memory Clock Configuration Register */ - {0x0014,0x10}, /* LCD Pixel Clock Configuration Register */ - {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */ - {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ - {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ - {0x0021,0x04}, /* DRAM Refresh Rate Register */ - {0x002A,0x00}, /* DRAM Timings Control Register 0 */ - {0x002B,0x01}, /* DRAM Timings Control Register 1 */ - {0x0020,0x80}, /* Memory Configuration Register */ - {0x0030,0x25}, /* Panel Type Register */ - {0x0031,0x00}, /* MOD Rate Register */ - {0x0032,0x4F}, /* LCD Horizontal Display Width Register */ - {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */ - {0x0035,0x01}, /* TFT FPLINE Start Position Register */ - {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ - {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */ - {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */ - {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */ - {0x003B,0x00}, /* TFT FPFRAME Start Position Register */ - {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ - {0x0040,0x03}, /* LCD Display Mode Register */ - {0x0041,0x02}, /* LCD Miscellaneous Register */ - {0x0042,0x00}, /* LCD Display Start Address Register 0 */ - {0x0043,0x00}, /* LCD Display Start Address Register 1 */ - {0x0044,0x00}, /* LCD Display Start Address Register 2 */ - {0x0046,0x40}, /* LCD Memory Address Offset Register 0 */ - {0x0047,0x01}, /* LCD Memory Address Offset Register 1 */ - {0x0048,0x00}, /* LCD Pixel Panning Register */ - {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ - {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ - {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ - {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ - {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ - {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ - {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ - {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ - {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ - {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ - {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ - {0x005B,0x00}, /* TV Output Control Register */ - {0x0060,0x03}, /* CRT/TV Display Mode Register */ - {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ - {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ - {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ - {0x0066,0x40}, /* CRT/TV Memory Address Offset Register 0 */ - {0x0067,0x01}, /* CRT/TV Memory Address Offset Register 1 */ - {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ - {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ - {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ - {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ - {0x0071,0x00}, /* LCD Ink/Cursor Start Address Register */ - {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ - {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ - {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ - {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ - {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ - {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ - {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ - {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ - {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ - {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ - {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ - {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ - {0x0081,0x00}, /* CRT/TV Ink/Cursor Start Address Register */ - {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ - {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ - {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ - {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ - {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ - {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ - {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ - {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ - {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ - {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ - {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ - {0x0100,0x00}, /* BitBlt Control Register 0 */ - {0x0101,0x00}, /* BitBlt Control Register 1 */ - {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ - {0x0103,0x00}, /* BitBlt Operation Register */ - {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ - {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ - {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ - {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ - {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ - {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ - {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ - {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ - {0x0110,0x00}, /* BitBlt Width Register 0 */ - {0x0111,0x00}, /* BitBlt Width Register 1 */ - {0x0112,0x00}, /* BitBlt Height Register 0 */ - {0x0113,0x00}, /* BitBlt Height Register 1 */ - {0x0114,0x00}, /* BitBlt Background Color Register 0 */ - {0x0115,0x00}, /* BitBlt Background Color Register 1 */ - {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ - {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ - {0x01E0,0x00}, /* Look-Up Table Mode Register */ - {0x01E2,0x00}, /* Look-Up Table Address Register */ - {0x01E4,0x00}, /* Look-Up Table Data Register */ - {0x01F0,0x10}, /* Power Save Configuration Register */ - {0x01F1,0x00}, /* Power Save Status Register */ - {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ - {0x01FC,0x01}, /* Display Mode Register */ - {0, 0} -}; -#endif /* CONFIG_VIDEO_SED13806_8BPP */ - -#ifdef CONFIG_VIDEO_SED13806_16BPP - -static const S1D_REGS init_regs [] = -{ - {0x0001,0x00}, /* Miscellaneous Register */ - {0x01FC,0x00}, /* Display Mode Register */ - {0x0004,0x1b}, /* General IO Pins Configuration Register 0 */ - {0x0005,0x00}, /* General IO Pins Configuration Register 1 */ - {0x0008,0xe5}, /* General IO Pins Control Register 0 */ - {0x0009,0x1f}, /* General IO Pins Control Register 1 */ - {0x0010,0x02}, /* Memory Clock Configuration Register */ - {0x0014,0x10}, /* LCD Pixel Clock Configuration Register */ - {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */ - {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ - {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ - {0x0021,0x04}, /* DRAM Refresh Rate Register */ - {0x002A,0x00}, /* DRAM Timings Control Register 0 */ - {0x002B,0x01}, /* DRAM Timings Control Register 1 */ - {0x0020,0x80}, /* Memory Configuration Register */ - {0x0030,0x25}, /* Panel Type Register */ - {0x0031,0x00}, /* MOD Rate Register */ - {0x0032,0x4F}, /* LCD Horizontal Display Width Register */ - {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */ - {0x0035,0x01}, /* TFT FPLINE Start Position Register */ - {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ - {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */ - {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */ - {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */ - {0x003B,0x00}, /* TFT FPFRAME Start Position Register */ - {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ - {0x0040,0x05}, /* LCD Display Mode Register */ - {0x0041,0x02}, /* LCD Miscellaneous Register */ - {0x0042,0x00}, /* LCD Display Start Address Register 0 */ - {0x0043,0x00}, /* LCD Display Start Address Register 1 */ - {0x0044,0x00}, /* LCD Display Start Address Register 2 */ - {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */ - {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */ - {0x0048,0x00}, /* LCD Pixel Panning Register */ - {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ - {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ - {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ - {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ - {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ - {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ - {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ - {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ - {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ - {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ - {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ - {0x005B,0x00}, /* TV Output Control Register */ - {0x0060,0x05}, /* CRT/TV Display Mode Register */ - {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ - {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ - {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ - {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */ - {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */ - {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ - {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ - {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ - {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ - {0x0071,0x00}, /* LCD Ink/Cursor Start Address Register */ - {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ - {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ - {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ - {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ - {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ - {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ - {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ - {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ - {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ - {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ - {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ - {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ - {0x0081,0x00}, /* CRT/TV Ink/Cursor Start Address Register */ - {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ - {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ - {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ - {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ - {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ - {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ - {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ - {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ - {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ - {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ - {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ - {0x0100,0x00}, /* BitBlt Control Register 0 */ - {0x0101,0x00}, /* BitBlt Control Register 1 */ - {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ - {0x0103,0x00}, /* BitBlt Operation Register */ - {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ - {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ - {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ - {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ - {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ - {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ - {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ - {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ - {0x0110,0x00}, /* BitBlt Width Register 0 */ - {0x0111,0x00}, /* BitBlt Width Register 1 */ - {0x0112,0x00}, /* BitBlt Height Register 0 */ - {0x0113,0x00}, /* BitBlt Height Register 1 */ - {0x0114,0x00}, /* BitBlt Background Color Register 0 */ - {0x0115,0x00}, /* BitBlt Background Color Register 1 */ - {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ - {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ - {0x01E0,0x01}, /* Look-Up Table Mode Register */ - {0x01E2,0x00}, /* Look-Up Table Address Register */ - {0x01E4,0x00}, /* Look-Up Table Data Register */ - {0x01F0,0x10}, /* Power Save Configuration Register */ - {0x01F1,0x00}, /* Power Save Status Register */ - {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ - {0x01FC,0x01}, /* Display Mode Register */ - {0, 0} -}; - -#endif /* CONFIG_VIDEO_SED13806_16BPP */ -#endif /* CONFIG_NEC_NL6448BC20 */ - - -#ifdef CONFIG_CONSOLE_EXTRA_INFO - -/*----------------------------------------------------------------------------- - * video_get_info_str -- setup a board string: type, speed, etc. - * line_number= location to place info string beside logo - * info= buffer for info string - *----------------------------------------------------------------------------- - */ -void video_get_info_str (int line_number, char *info) -{ - if (line_number == 1) { - strcpy (info, " RPXClassic board"); - } - else { - info [0] = '\0'; - } - -} -#endif - -/*----------------------------------------------------------------------------- - * board_video_init -- init de l'EPSON, config du CS - *----------------------------------------------------------------------------- - */ -unsigned int board_video_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - /* Program ECCX registers */ - *(ECCX_CSR12) |= ECCX_860; - *(ECCX_CSR8) |= ECCX_BE | ECCX_CS2; - *(ECCX_CSR8) |= ECCX_ENEPSON; - - memctl->memc_or2 = SED13806_OR; - memctl->memc_br2 = SED13806_REG_ADDR | SED13806_ACCES; - - return (SED13806_REG_ADDR); -} - -/*----------------------------------------------------------------------------- - * board_validate_screen -- - *----------------------------------------------------------------------------- - */ -void board_validate_screen (unsigned int base) -{ - /* Activate the panel bias power */ - *(volatile unsigned char *)(base + REG_GPIO_CTRL) = 0x80; -} -/*----------------------------------------------------------------------------- - * board_get_regs -- - *----------------------------------------------------------------------------- - */ -const S1D_REGS *board_get_regs (void) -{ - return (init_regs); -} -/*----------------------------------------------------------------------------- - * board_get_width -- - *----------------------------------------------------------------------------- - */ -int board_get_width (void) -{ - return (DISPLAY_WIDTH); -} - -/*----------------------------------------------------------------------------- - * board_get_height -- - *----------------------------------------------------------------------------- - */ -int board_get_height (void) -{ - return (DISPLAY_HEIGHT); -} - -#endif /* CONFIG_VIDEO_SED13806 */ diff --git a/board/RPXClassic/flash.c b/board/RPXClassic/flash.c deleted file mode 100644 index 97ffa68..0000000 --- a/board/RPXClassic/flash.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * (C) Copyright 2001 - * Stäubli Faverges - - * Pierre AUBERT p.aubert@staubli.com - * U-Boot port on RPXClassic LF (CLLF_BW31) board - * - * RPXClassic uses Am29DL323B flash memory with 2 banks - * - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0 ; - int i; - - /* Init: no FLASHes known */ - for (i=0; i= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - flash_info[0].size = size_b0; - - return (size_b0); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x00010000; - info->start[3] = base + 0x00018000; - info->start[4] = base + 0x00020000; - info->start[5] = base + 0x00028000; - info->start[6] = base + 0x00030000; - info->start[7] = base + 0x00038000; - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i-7) * 0x00040000) ; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AMDL323B: - printf ("AMDL323DB (16 Mbytes, bottom boot sect)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Reset flash componeny */ - addr [0] = 0xf0f0f0f0; - - /* Write auto select command: read Manufacturer ID */ - addr[0xAAA] = 0xAAAAAAAA ; - addr[0x555] = 0x55555555 ; - addr[0xAAA] = 0x90909090 ; - - value = addr[0] ; - - switch (value & 0x00FF00FF) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[2] ; /* device ID */ - - switch (value & 0x00FF00FF) { - case (AMD_ID_DL323B & 0x00FF00FF): - info->flash_id += FLASH_AMDL323B; - info->sector_count = 71; - info->size = 0x01000000; /* 16 Mb */ - - break; - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - /* set up sector start address table */ - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x00010000; - info->start[3] = base + 0x00018000; - info->start[4] = base + 0x00020000; - info->start[5] = base + 0x00028000; - info->start[6] = base + 0x00030000; - info->start[7] = base + 0x00038000; - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i-7) * 0x00040000) ; - } - - /* check for protected sectors */ - for (i = 0; i < 23; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[4] & 1 ; - } - /* Check for protected sectors in the 2nd bank */ - addr[0x100AAA] = 0xAAAAAAAA ; - addr[0x100555] = 0x55555555 ; - addr[0x100AAA] = 0x90909090 ; - - for (i = 23; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[4] & 1 ; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0xF0F0F0F0; /* reset bank 1 */ - addr = (volatile unsigned long *)info->start[23]; - - *addr = 0xF0F0F0F0; /* reset bank 2 */ - - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0x80808080; - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long *)(info->start[sect]) ; - addr[0] = 0x30303030 ; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long *)(info->start[l_sect]); - while ((addr[0] & 0x80808080) != 0x80808080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_long *)info->start[0]; - addr[0] = 0xF0F0F0F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0xA0A0A0A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds deleted file mode 100644 index 0eb2fba..0000000 --- a/board/RPXClassic/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug deleted file mode 100644 index b9c84c7..0000000 --- a/board/RPXClassic/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/RPXlite/Makefile b/board/RPXlite/Makefile deleted file mode 100644 index c17cbac..0000000 --- a/board/RPXlite/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = RPXlite.o flash.o diff --git a/board/RPXlite/README b/board/RPXlite/README deleted file mode 100644 index 3ca6711..0000000 --- a/board/RPXlite/README +++ /dev/null @@ -1,877 +0,0 @@ -# Porting U-Boot onto RPXlite board -# Written by Yoo. Jonghoon -# E-Mail : yooth@ipone.co.kr -# IP ONE Inc. - -# Since 2001. 1. 29 - -# Shell : bash -# Cross-compile tools : Montavista Hardhat -# Debugging tools : Windriver VisionProbe (PowerPC BDM) -# ppcboot ver. : ppcboot-0.8.1 - -############################################################### -# 1. Hardware setting -############################################################### - -1.1. Board, BDM settings - Install board, BDM, connect each other - -1.2. Save Register value - Boot with board-on monitor program and save the - register values with BDM. - -1.3. Configure flash programmer - Check flash memory area in the memory map. - 0xFFC00000 - 0xFFFFFFFF - - Boot monitor program is at - 0xFFF00000 - - You can program on-board flash memory with VisionClick - flash programmer. Set the target flash device as: - - 29DL800B - - (?) The flash memory device in the board *is* 29LV800B, - but I cannot program it with '29LV800B' option. - (in VisionClick flash programming tools) - I don't know why... - -1.4. Save boot monitor program *IMPORTANT* - Upload boot monitor program from board to file. - boot monitor program starts at 0xFFF00000 - -1.5. Test flash memory programming - Try to erase boot program in the flash memory, - and re-write them. - *WARNING* YOU MUST SAVE BOOT PROGRAM TO FILE - BEFORE ERASING FLASH - -############################################################### -# 2. U-Boot setting -############################################################### - -2.1. Download U-Boot tarball at - ftp://ftp.denx.de - (The latest version is ppcboot-0.8.1.tar.bz2) - - To extract the archive use the following syntax : - > bzip2 -cd ppcboot-0.8.1.tar.bz2 | tar xf - - -2.2. Add the following lines in '.profile' - export PATH=$PATH:/opt/hardhat/devkit/ppc/8xx/bin - -2.3. Make board specific config, for example: - > cd ppcboot-0.8.1 - > make TQM860L_config - - Now we can build ppcboot bin files. - After make all, you must see these files in your - ppcboot root directory. - - ppcboot - ppcboot.bin - ppcboot.srec - ppcboot.map - -2.4. Make your own board directory into the - ppcboot-0.8.1/board - and make your board-specific files here. - - For exmanple, tqm8xx files are composed of - .depend : Nothing - Makefile : To make config file - config.mk : Sets base address - flash.c : Flash memory control files - ppcboot.lds : linker(ld) script? (I don't know this yet) - tqm8xx.c : DRAM control and board check routines - - And, add your board config lines in the - ppcboot-0.8.1/Makefile - - Finally, add config_(your board).h file in the - ppcboot-0.8.1/include/ - - I've made board/rpxlite directory, and just copied - tqm8xx settings for now. - - Rebuild ppcboot for rpxlite board: - > make rpxlite_config - > make - -############################################################### -# 3. U-Boot porting -############################################################### - -3.1. My RPXlite files are based on tqm8xx board files. - > cd board - > cp -r tqm8xx RPXLITE - > cd RPXLITE - > mv tqm8xx.c RPXLITE.c - > cd ../../include - > cp config_tqm8xx.h config_RPXLITE.h - -3.2. Modified files are: - board/RPXLITE/RPXLITE.c /* DRAM-related routines */ - board/RPXLITE/flash.c /* flash-related routines */ - board/RPXLITE/config.mk /* set text base address */ - arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */ - include/config_RPXLITE.h /* board specific registers */ - - See 'reg_config.txt' for register values in detail. - -############################################################### -# 4. Running Linux -############################################################### - - -############################################################### -# Misc Information -############################################################### - -mem_config.txt: -=============== - -Flash memory device : AM29LV800BB (1Mx8Bit) x 4 device -manufacturer id : 01 (AMD) -device id : 5B (AM29LV800B) -size : 4Mbyte -sector # : 19 - -Sector information : - -number start addr. size -00 FFC0_0000 64 -01 FFC1_0000 32 -02 FFC1_8000 32 -03 FFC2_0000 128 -04 FFC4_0000 256 -05 FFC8_0000 256 -06 FFCC_0000 256 -07 FFD0_0000 256 -08 FFD4_0000 256 -09 FFD8_0000 256 -10 FFDC_0000 256 -11 FFE0_0000 256 -12 FFE4_0000 256 -13 FFE8_0000 256 -14 FFEC_0000 256 -15 FFF0_0000 256 -16 FFF4_0000 256 -17 FFF8_0000 256 -18 FFFC_0000 256 - - -reg_config.txt: -=============== - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* SIU (System Interface Unit) */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ - - -/*### IMMR */ -/*### Internal Memory Map Register */ -/*### Chap. 11.4.1 */ - - ISB = 0xFA20 /* Set the Immap base = 0xFA20 0000 */ - PARTNUM = 0x21 - MASKNUM = 0x00 - - => 0xFA20 2100 - ---------------------------------------------------------------------- - -/*### SIUMCR */ -/*### SIU Module Configuration Register */ -/*### Chap. 11.4.2 */ -/*### Offset : 0x0000 0000 */ - - EARB = 0 - EARP = 0 - DSHW = 0 - DBGC = 0 - DBPC = 0 - FRC = 0 - DLK = 0 - OPAR = 0 - PNCS = 0 - DPC = 0 - MPRE = 0 - MLRC = 10 /* ~KR/~RETRY/~IRQ4/SPKROUT functions as ~KR/~TRTRY */ - AEME = 0 - SEME = 0 - BSC = 0 - GB5E = 0 - B2DD = 0 - B3DD = 0 - - => 0x0000 0800 - ---------------------------------------------------------------------- - -/*### SYPCR */ -/*### System Protection Control Register */ -/*### Chap. 11.4.3 */ -/*### Offset : 0x0000 0004 */ - - SWTC = 0xFFFF /* SW watchdog timer count = 0xFFFF */ - BMT = 0x06 /* BUS monitoring timing */ - BME = 1 /* BUS monitor enable */ - SWF = 1 - SWE = 0 /* SW watchdog disable */ - SWRI = 0 - SWP = 1 - - => 0xFFFF 0689 - ---------------------------------------------------------------------- - -/*### TESR */ -/*### Transfer Error Status Register */ -/*### Chap. 11.4.4 */ -/*### Offset : 0x0000 0020 */ - - IEXT = 0 - ITMT = 0 - IPB = 0000 - DEXT = 0 - DTMT = 0 - DPB = 0000 - - => 0x0000 0000 - ---------------------------------------------------------------------- - -/*### SIPEND */ -/*### SIU Interrupt Pending Register */ -/*### Chap. 11.5.4.1 */ -/*### Offset : 0x0000 0010 */ - - IRQ0~IRQ7 = 0 - LVL0~LVL7 = 0 - - => 0x0000 0000 - ---------------------------------------------------------------------- - -/*### SIMASK */ -/*### SIU Interrupt Mask Register */ -/*### Chap. 11.5.4.2 */ -/*### Offset : 0x0000 0014 */ - - IRM0~IRM7 = 0 /* Mask all interrupts */ - LVL0~LVL7 = 0 - - => 0x0000 0000 - ---------------------------------------------------------------------- - -/*### SIEL */ -/*### SIU Interrupt Edge/Level Register */ -/*### Chap. 11.5.4.3 */ -/*### Offset : 0x0000 0018 */ - - ED0~ED7 = 0 /* Low level triggered */ - WMn0~WMn7 = 0 /* Not allowed to exit from low-power mode */ - - => 0x0000 0000 - ---------------------------------------------------------------------- - -/*### SIVEC */ -/*### SIU Interrupt Vector Register */ -/*### Chap. 11.5.4.4 */ -/*### Offset : 0x0000 001C */ - - INTC = 3C /* The lowest interrupt is pending..(?) */ - - => 0x3C00 0000 - ---------------------------------------------------------------------- - -/*### SWSR */ -/*### Software Service Register */ -/*### Chap. 11.7.1 */ -/*### Offset : 0x0000 001E */ - - SEQ = 0 - - => 0x0000 - ---------------------------------------------------------------------- - -/*### SDCR */ -/*### SDMA Configuration Register */ -/*### Chap. 20.2.1 */ -/*### Offset : 0x0000 0032 */ - - FRZ = 0 - RAID = 01 /* Priority level 5 (BR5) (normal operation) */ - - => 0x0000 0001 - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* UPMA (User Programmable Machine A) */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ - -/*### Chap. 16.6.4.1 */ -/*### Offset = 0x0000 017c */ - - T0 = CFFF CC24 /* Single Read */ - T1 = 0FFF CC04 - T2 = 0CAF CC04 - T3 = 03AF CC08 - T4 = 3FBF CC27 /* last */ - T5 = FFFF CC25 - T6 = FFFF CC25 - T7 = FFFF CC25 - T8 = CFFF CC24 /* Burst Read */ - T9 = 0FFF CC04 - T10 = 0CAF CC84 - T11 = 03AF CC88 - T12 = 3FBF CC27 /* last */ - T13 = FFFF CC25 - T14 = FFFF CC25 - T15 = FFFF CC25 - T16 = FFFF CC25 - T17 = FFFF CC25 - T18 = FFFF CC25 - T19 = FFFF CC25 - T20 = FFFF CC25 - T21 = FFFF CC25 - T22 = FFFF CC25 - T23 = FFFF CC25 - T24 = CFFF CC24 /* Single Write */ - T25 = 0FFF CC04 - T26 = 0CFF CC04 - T27 = 03FF CC00 - T28 = 3FFF CC27 /* last */ - T29 = FFFF CC25 - T30 = FFFF CC25 - T31 = FFFF CC25 - T32 = CFFF CC24 /* Burst Write */ - T33 = 0FFF CC04 - T34 = 0CFF CC80 - T35 = 03FF CC8C - T36 = 0CFF CC00 - T37 = 33FF CC27 /* last */ - T38 = FFFF CC25 - T39 = FFFF CC25 - T40 = FFFF CC25 - T41 = FFFF CC25 - T42 = FFFF CC25 - T43 = FFFF CC25 - T44 = FFFF CC25 - T45 = FFFF CC25 - T46 = FFFF CC25 - T47 = FFFF CC25 - T48 = C0FF CC24 /* Refresh */ - T49 = 03FF CC24 - T50 = 0FFF CC24 - T51 = 0FFF CC24 - T52 = 3FFF CC27 /* last */ - T53 = FFFF CC25 - T54 = FFFF CC25 - T55 = FFFF CC25 - T56 = FFFF CC25 - T57 = FFFF CC25 - T58 = FFFF CC25 - T59 = FFFF CC25 - T60 = FFFF CC25 /* Exception */ - T61 = FFFF CC25 - T62 = FFFF CC25 - T63 = FFFF CC25 - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* UPMB */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - -/*### Chap. 16.6.4.1 */ - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* MEMC */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - -/*### BR0 & OR0 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR0(0x0000 0100) & OR0(0x0000 0104) */ -/*### Flash memory */ - - BA = 1111 1110 0000 0000 0 /* Base addr = 0xFE00 0000 */ - AT = 000 - PS = 00 - PARE = 0 - WP = 0 - MS = 0 /* GPCM */ - V = 1 /* Valid */ - - => 0xFE00 0001 - - AM = 1111 1110 0000 0000 0 /* 32MBytes */ - ATM = 000 - CSNT/SAM = 0 - ACS/G5LA,G5LS = 00 - BIH = 1 /* Burst inhibited */ - SCY = 0100 /* cycle length = 4 */ - SETA = 0 - TRLX = 0 - EHTR = 0 - - => 0xFE00 0140 - -/*### BR1 & OR1 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR1(0x0000 0108) & OR1(0x0000 010C) */ -/*### SDRAM */ - - BA = 0000 0000 0000 0000 0 /* Base addr = 0x0000 0000 */ - AT = 000 - PS = 00 - PARE = 0 - WP = 0 - MS = 1 /* UPMA */ - V = 1 /* Valid */ - - => 0x0000 0081 - - AM = 1111 1110 0000 0000 /* 32MBytes */ - ATM = 000 - CSNT/SAM = 1 - ACS/G5LA,G5LS = 11 - BIH = 0 - SCY = 0000 /* cycle length = 0 */ - SETA = 0 - TRLX = 0 - EHTR = 0 - - => 0xFE00 0E00 - -/*### BR2 & OR2 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR2(0x0000 0110) & OR2(0x0000 0114) */ - - BR2 & OR2 = 0x0000 0000 /* Not used */ - -/*### BR3 & OR3 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR3(0x0000 0118) & OR3(0x0000 011C) */ -/*### BCSR */ - - BA = 1111 1010 0100 0000 0 /* Base addr = 0xFA40 0000 */ - AT = 000 - PS = 00 - PARE = 0 - WP = 0 - MS = 0 /* GPCM */ - V = 1 /* Valid */ - - => 0xFA40 0001 - - AM = 1111 1111 0111 1111 1 /* (?) */ - ATM = 000 - CSNT/SAM = 1 - ACS/G5LA,G5LS = 00 - BIH = 1 /* Burst inhibited */ - SCY = 0001 /* cycle length = 1 */ - SETA = 0 - TRLX = 0 - - => 0xFF7F 8910 - -/*### BR4 & OR4 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR4(0x0000 0120) & OR4(0x0000 0124) */ -/*### NVRAM & SRAM */ - - BA = 1111 1010 0000 0000 0 /* Base addr = 0xFA00 0000 */ - AT = 000 - PS = 01 - PARE = 0 - WP = 0 - MS = 0 /* GPCM */ - V = 1 /* Valid */ - - => 0xFA00 0401 - - AM = 1111 1111 1111 1000 0 /* 8MByte */ - ATM = 000 - CSNT/SAM = 1 - ACS/G5LA,G5LS = 00 - BIH = 1 /* Burst inhibited */ - SCY = 0111 /* cycle length = 7 */ - SETA = 0 - TRLX = 0 - - => 0xFFF8 0970 - -/*### BR5 & OR5 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR2(0x0000 0128) & OR2(0x0000 012C) */ - - BR5 & OR5 = 0x0000 0000 /* Not used */ - -/*### BR6 & OR6 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR2(0x0000 0130) & OR2(0x0000 0134) */ - - BR6 & OR6 = 0x0000 0000 /* Not used */ - -/*### BR7 & OR7 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR7(0x0000 0138) & OR7(0x0000 013C) */ - - BR7 & OR7 = 0x0000 0000 /* Not used */ - -/*### MAR */ -/*### Memory Address Register */ -/*### Chap. 16.4.7 */ -/*### Offset : 0x0000 0164 */ - - MA = External memory address - -/*### MCR */ -/*### Memory Command Register */ -/*### Chap. 16.4.5 */ -/*### Offset : 0x0000 0168 */ - - OP = xx /* Command op code */ - UM = 1 /* Select UPMA */ - MB = 001 /* Select CS1 */ - MCLF = xxxx /* Loop times */ - MAD = xx xxxx /* Memory array index */ - -/*### MAMR */ -/*### Machine A Mode Register */ -/*### Chap. 16.4.4 */ -/*### Offset : 0x0000 0170 */ - - PTA = 0101 1000 - PTAE = 1 /* Periodic timer A enabled */ - AMA = 010 - DSA = 00 - G0CLA = 000 - GPLA4DIS = 1 - RLFA = 0100 - WLFA = 0011 - TLFA = 0000 - - => 0x58A0 1430 - -/*### MBMR */ -/*### Machine B Mode Register */ -/*### Chap. 16.4.4 */ -/*### Offset : 0x0000 0174 */ - - PTA = 0100 1110 - PTAE = 0 /* Periodic timer B disabled */ - AMA = 000 - DSA = 00 - G0CLA = 000 - GPLA4DIS = 1 - RLFA = 0000 - WLFA = 0000 - TLFA = 0000 - - => 0x4E00 1000 - -/*### MSTAT */ -/*### Memory Status Register */ -/*### Chap. 16.4.3 */ -/*### Offset : 0x0000 0178 */ - - PER0~PER7 = Parity error - WPER = Write protection error - - => 0x0000 - -/*### MPTPR */ -/*### Memory Periodic Timer Prescaler Register */ -/*### Chap. 16.4.8 */ -/*### Offset : 0x0000 017A */ - - PTP = 0000 1000 /* Divide by 8 */ - - => 0x0800 - -/*### MDR */ -/*### Memory Data Register */ -/*### Chap. 16.4.6 */ -/*### Offset : 0x0000 017C */ - - MD = Memory data contains the RAM array word - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* TIMERS */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - -/*### TBREFx */ -/*### Timebase Reference Registers */ -/*### Chap. 11.9.2 */ -/*### Offset : TBREFF0(0x0000 0204)/TBREFF1(0x0000 0208) */ -/*### (Locked) */ - - TBREFF0 = 0xFFFF FFFF - TBREFF1 = 0xFFFF FFFF - ---------------------------------------------------------------------- - -/*### TBSCR */ -/*### Timebase Status and Control Registers */ -/*### Chap. 11.9.3 */ -/*### Offset : 0x0000 0200 */ -/*### (Locked) */ - - TBIRQ = 00000000 - REF0 = 0 - REF1 = 0 - REFE0 = 0 /* Reference interrupt disable */ - REFE1 = 0 - TBF = 1 - TBE = 1 /* Timebase enable */ - - => 0x0003 - ---------------------------------------------------------------------- - -/*### RTCSC */ -/*### Real-Time Clock Status and Control Registers */ -/*### Chap. 11.10.1 */ -/*### Offset : 0x0000 0220 */ -/*### (Locked) */ - - RTCIRQ = 00000000 - SEC = 1 - ALR = 0 - 38K = 0 /* PITRTCLK is driven by 32.768KHz */ - SIE = 0 - ALE = 0 - RTF = 0 - RTE = 1 /* Real-Time clock enabled */ - - => 0x0081 - ---------------------------------------------------------------------- - -/*### RTC */ -/*### Real-Time Clock Registers */ -/*### Chap. 11.10.2 */ -/*### Offset : 0x0000 0224 */ -/*### (Locked) */ - - RTC = Real time clock measured in second - ---------------------------------------------------------------------- - -/*### RTCAL */ -/*### Real-Time Clock Alarm Registers */ -/*### Chap. 11.10.3 */ -/*### Offset : 0x0000 022C */ -/*### (Locked) */ - - ALARM = 0xFFFF FFFF - ---------------------------------------------------------------------- - -/*### RTSEC */ -/*### Real-Time Clock Alarm Second Registers */ -/*### Chap. 11.10.4 */ -/*### Offset : 0x0000 0228 */ -/*### (Locked) */ - - COUNTER = Counter bits(fraction of a second) - ---------------------------------------------------------------------- - -/*### PISCR */ -/*### Periodic Interrupt Status and Control Register */ -/*### Chap. 11.11.1 */ -/*### Offset : 0x0000 0240 */ -/*### (Locked) */ - - PIRQ = 0 - PS = 0 /* Write 1 to clear */ - PIE = 0 - PITF = 1 - PTE = 0 /* PIT disabled */ - ---------------------------------------------------------------------- - -/*### PITC */ -/*### PIT Count Register */ -/*### Chap. 11.11.2 */ -/*### Offset : 0x0000 0244 */ -/*### (Locked) */ - - PITC = PIT count - ---------------------------------------------------------------------- - -/*### PITR */ -/*### PIT Register */ -/*### Chap. 11.11.3 */ -/*### Offset : 0x0000 0248 */ -/*### (Locked) */ - - PIT = PIT count /* Read only */ - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* CLOCKS */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - - ---------------------------------------------------------------------- - -/*### SCCR */ -/*### System Clock and Reset Control Register */ -/*### Chap. 15.6.1 */ -/*### Offset : 0x0000 0280 */ -/*### (Locked) */ - - COM = 11 /* Clock output disabled */ - TBS = 1 /* Timebase frequency source is GCLK2 divided by 16 */ - RTDIV = 0 /* The clock is divided by 4 */ - RTSEL = 0 /* OSCM(Crystal oscillator) is selected */ - CRQEN = 0 - PRQEN = 0 - EBDF = 00 /* CLKOUT is GCLK2 divided by 1 */ - DFSYNC = 00 /* Divided by 1 (normal operation) */ - DFBRG = 00 /* Divided by 1 (normal operation) */ - DFNL = 000 - DFNH = 000 - - => 0x6200 0000 - ---------------------------------------------------------------------- - -/*### PLPRCR */ -/*### PLL, Low-Power, and Reset Control Register */ -/*### Chap. 15.6.2 */ -/*### Offset : 0x0000 0284 */ -/*### (Locked) */ - - MF = 0x005 /* 48MHz (?) ( = 8MHz * (MF+1) ) */ - SPLSS = 0 - TEXPS = 0 - TMIST = 0 - CSRC = 0 /* The general system clock is generated by the DFNH field */ - LPM = 00 /* Normal high/normal low mode */ - CSR = 0 - LOLRE = 0 - FIOPD = 0 - - => 0x0050 0000 - ---------------------------------------------------------------------- - -/*### RSR */ -/*### Reset Status Register */ -/*### Chap. 12.2 */ -/*### Offset : 0x0000 0288 */ -/*### (Locked) */ - - EHRS = External hard reset - ESRS = External soft reset - LLRS = Loss-of-lock reset - SWRS = Software watchdog reset - CSRS = Check stop reset - DBHRS = Debug port hard reset - DBSRS = Debug port soft reset - JTRS = JTAG reset - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* DMA */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - -/*### SDSR */ -/*### SDMA Status Register */ -/*### Chap. 20.2.2 */ -/*### Offset : 0x0000 0908 */ - - SBER = 0 /* SDMA channel bus error */ - DSP2 = 0 /* DSP chain2 (Tx) interrupt */ - DSP1 = 0 /* DSP chain1 (Rx) interrupt */ - - => 0x00 - -/*### SDMR */ -/*### SDMA Mask Register */ -/*### Chap. 20.2.3 */ -/*### Offset : 0x0000 090C */ - - SBER = 0 - DSP2 = 0 - DSP1 = 0 /* All interrupts are masked */ - - => 0x00 - -/*### SDAR */ -/*### SDMA Address Register */ -/*### Chap. 20.2.4 */ -/*### Offset : 0x0000 0904 */ - - AR = 0xxxxx xxxx /* current system address */ - - => 0xFA20 23AC - -/*### IDSRx */ -/*### IDMA Status Register */ -/*### Chap. 20.3.3.2 */ -/*### Offset : IDSR1(0x0000 0910) & IDSR2(0x0000 0918) */ - - AD = 0 - DONE = 0 - OB = 0 - - => 0x00 - -/*### IDMRx */ -/*### IDMA Mask Register */ -/*### Chap. 20.3.3.3 */ -/*### Offset : IDMR1(0x0000 0914) & IDMR2(0x0000 091C) */ - - AD = 0 - DONE = 0 - OB = 0 diff --git a/board/RPXlite/README.PlanetCore b/board/RPXlite/README.PlanetCore deleted file mode 100644 index b73c5f5..0000000 --- a/board/RPXlite/README.PlanetCore +++ /dev/null @@ -1,163 +0,0 @@ -After several heart-struck failure, I got one workable way to program -each other in FLASH between PlanetCore and U-Boot. - -Hardware Platform : RPXlite DW(EP 823 H1 DW) - -1. From U-Boot to PlanetCore - -Utilities : PlanetCore Boot Loader - PCL200.mot - -[root@sam tftpboot]# ppc_8xx-objcopy -O ppcboot -PCL200.mot pcl200.bin - -[Target Operation] -u-boot>t 100000 pcl200.bin -u-boot>go 0x100000 -## Starting application at 0x00100000 ... - -MPC8xx PlanetCore Flash Burner v2.00 -Copyright 2001 Embedded Planet. All rights reserved. - -Construct Flash Device.....done. - - -Program MPC8xx PlanetCore Boot Loader v2.00 -Built Sep 19, 2001 at 14:34:42 -Image located from FC000000 to FC01B5D1. -(Skipping an image, only loading low boot image) - -Low boot board detected, skipping high boot image. -Erasing, programming and verifying will start in 20 -seconds -Press P to start immediately or ESC to cancel -Press Space or Enter for more options. -.............. - -Erasing -Programming -FLASH programmed successfully! -Press R to induce a hard reset - -MPC8xx PlanetCore Boot Loader v2.00 -Copyright 2001 Embedded Planet. All rights reserved. -DRAM available size = 64 MB -wvCV -DRAM OK -> - -2. From PlanetCore to U-Boot - -Utilities : PlanetCore FLASH Burner - PCB200.mot - -Use Flash Burner to finish the work: - -First, TFTP the U-Boot image file to RAM; For example, -RPXlite_DW.bin to 0x400000 -Second, TFTP FLASH Burner to RAM; For example, -0x100000 -Third, run the FLASH Burner and Program the U-Boot -image into the correct location in FLASH. - -[Target Operation] -MPC8xx PlanetCore Boot Loader v2.00 -Copyright 2001 Embedded Planet. All rights reserved. -DRAM available size = 64 MB -wvCV -DRAM OK ->t -Load using tftp via Ethernet -Enter server IP address <172.16.115.6> : -Enter server filename : RPXlite_DW.bin -Enter (B)inary or (S)record input mode : B -Enter address offset : <00400000 hex> : - -Total bytes = 120096 in 232184 uSecs -Loaded addresses 00400000 through 0041D51F. -Start address = 00400000 ->t -Load using tftp via Ethernet -Enter server IP address <172.16.115.6> : -Enter server filename : PCB200.mot -Enter (B)inary or (S)record input mode : S -Enter address offset : <00000000 hex> : -.512.1024..2048....4096..... -Total bytes = 326280 in 2570249 uSecs -Loaded addresses 00100000 through 0011BB51. -Start address = 00100000 ->go -[Go 00100000] - -MPC8xx PlanetCore Flash Burner v2.00 -Copyright 2001 Embedded Planet. All rights reserved. - -Construct Flash Device.....done. - -Bad start address -Start = 0xFFFFFFFF, target = 0xFFFFFFFF, length = -0xFFFFFFFF -Forcing Menu Interface - -h[elp] Show commands. -c[ode] Show information on code to be loaded. -di[splay] Display all flash sections. -du[mp] Dump memory. d ? for more info. -e[rase] Erase flash sections. -f[ill] Fill flash sections. -im[age] Toggle load high, low, or both flash -images. -in[fo] Show flash information. -ma[p] Show memory map. -mo[dify] Modify memory. m ? for more info. -p[rogram] Erase, program, and verify now. -reset Restart the loader. -s[how] Show flash sections to erase and program. -t[est] Test flash sections. -q[uit] Quit without programming. -#program 400000 ff000000 1D51F -doProgram( 400000 ff000000 1D51F ) - -Start = 0x00400000, target = 0xFF000000, length = -0x0001D51F -Erasing sector 0xFF000000, length 0x008000. -Erasing sector 0xFF008000, length 0x008000. -Erasing sector 0xFF010000, length 0x008000. -Erasing sector 0xFF018000, length 0x008000. -Programming FF000000 through FF01D51E -FLASH programmed successfully! -Press R to induce a hard reset - -Forcing Hard Reset by MachineCheck and -ResetOnCheckstop... - -U-Boot 1.1.2 (Aug 29 2004 - 15:11:27) - -CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB -D-Cache -Board: RPXlite_DW -DRAM: 64 MB -FLASH: 16 MB -*** Warning - bad CRC, using default environment - -In: serial -Out: serial -Err: serial -Net: SCC ETHERNET -u-boot> - -------------------------------------------------- - -Well, sometimes network function of PlanetCore couldn't work when -switching from U-Boot to PlanetCore. For example, you couldn't -download a file from HOST PC via TFTP. Don't worry, just restart your -HOST PC and everything would work as smooth as clockwork. I don't -know the reason WHY:-) - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Merry Christmas and Happy New Year! - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -===== -Best regards, - -Sam diff --git a/board/RPXlite/RPXlite.c b/board/RPXlite/RPXlite.c deleted file mode 100644 index 08575a4..0000000 --- a/board/RPXlite/RPXlite.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - * - * DRAM related UPMA register values are modified. - * See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS - */ - -#include -#include - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFCC25 - -const uint sdram_table[] = { - /* - * Single Read. (Offset 00h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08, - 0x3FBFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Read. (Offset 08h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88, - 0x3FBFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Single Write. (Offset 18h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00, - 0x3FFFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Write. (Offset 20h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C, - 0x0CFFCC00, 0x33FFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* - * Refresh. (Offset 30h in UPMA RAM) - */ - 0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24, - 0x3FFFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Exception. (Offset 3Ch in UPMA RAM) - */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_ -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - puts ("Board: RPXlite\n"); - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size10; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* Refresh clock prescalar */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - memctl->memc_mar = 0x00000000; - - /* Map controller banks 1 to the SDRAM bank */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - refresh twice */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* Check Bank 0 Memory Size - * try 10 column mode - */ - - size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM, - SDRAM_MAX_SIZE); - - return (size10); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size (base, maxsize)); -} diff --git a/board/RPXlite/flash.c b/board/RPXlite/flash.c deleted file mode 100644 index 21b11d4..0000000 --- a/board/RPXlite/flash.c +++ /dev/null @@ -1,508 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - * - * Some of flash control words are modified. (from 2x16bit device - * to 4x8bit device) - * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices - * are not tested. - * - * (?) Does an RPXLite board which - * does not use AM29LV800 flash memory exist ? - * I don't know... - */ - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ -/* volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; */ -/* volatile memctl8xx_t *memctl = &immap->im_memctl; */ - unsigned long size_b0 ; - int i; - - /* Init: no FLASHes known */ - for (i=0; imemc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; -%%%*/ - /* Re-do sizing to get full correct info */ - - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - flash_info[0].size = size_b0; - - return (size_b0); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00010000; - info->start[2] = base + 0x00018000; - info->start[3] = base + 0x00020000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + ((i-3) * 0x00040000) ; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00010000; - info->start[i--] = base + info->size - 0x00018000; - info->start[i--] = base + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00040000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0xAAA] = 0x00AA00AA ; - addr[0x555] = 0x00550055 ; - addr[0xAAA] = 0x00900090 ; - - value = addr[0] ; - - switch (value & 0x00FF00FF) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[2] ; /* device ID */ - - switch (value & 0x00FF00FF) { - case (AMD_ID_LV400T & 0x00FF00FF): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV400B & 0x00FF00FF): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV800T & 0x00FF00FF): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV800B & 0x00FF00FF): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00400000; /*%%% Size doubled by yooth */ - break; /* => 4 MB */ - - case (AMD_ID_LV160T & 0x00FF00FF): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (AMD_ID_LV160B & 0x00FF00FF): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - /*%%% sector start address modified */ - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00010000; - info->start[2] = base + 0x00018000; - info->start[3] = base + 0x00020000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + ((i-3) * 0x00040000) ; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00010000; - info->start[i--] = base + info->size - 0x00018000; - info->start[i--] = base + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00040000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[4] & 1 ; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0xF0F0F0F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0x80808080; - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long *)(info->start[sect]) ; - addr[0] = 0x30303030 ; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long *)(info->start[l_sect]); - while ((addr[0] & 0x80808080) != 0x80808080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_long *)info->start[0]; - addr[0] = 0xF0F0F0F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0xA0A0A0A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds deleted file mode 100644 index 0eb2fba..0000000 --- a/board/RPXlite/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug deleted file mode 100644 index b9c84c7..0000000 --- a/board/RPXlite/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/boards.cfg b/boards.cfg index 2125e90..1faa906 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1246,5 +1246,3 @@ Orphan powerpc 74xx_7xx - - evb64260 Orphan powerpc mpc824x - - mousse MOUSSE - - Orphan powerpc mpc8260 - - - rsdproto - - Orphan powerpc mpc8260 - - rpxsuper RPXsuper - - -Orphan powerpc mpc8xx - - - RPXClassic - - -Orphan powerpc mpc8xx - - - RPXlite - - diff --git a/doc/README.scrapyard b/doc/README.scrapyard index b068544..9915500 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,8 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +RPXClassic powerpc mpc8xx - 2014-04-04 +RPXlite powerpc mpc8xx - 2014-04-04 genietv powerpc mpc8xx - 2014-04-04 mbx8xx powerpc mpc8xx - 2014-04-04 nx823 powerpc mpc8xx - 2014-04-04 diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c index 3732583..6638277 100644 --- a/drivers/pcmcia/mpc8xx_pcmcia.c +++ b/drivers/pcmcia/mpc8xx_pcmcia.c @@ -211,7 +211,7 @@ static u_int m8xx_get_graycode(u_int size) #if 0 -#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE) +#if defined(CONFIG_RPXLITE) /* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks. * SYPCR is write once only, therefore must the slowest memory be faster diff --git a/drivers/pcmcia/rpx_pcmcia.c b/drivers/pcmcia/rpx_pcmcia.c index c7c425b..5b24f0b 100644 --- a/drivers/pcmcia/rpx_pcmcia.c +++ b/drivers/pcmcia/rpx_pcmcia.c @@ -18,7 +18,7 @@ #endif #if defined(CONFIG_PCMCIA) \ - && (defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)) + && defined(CONFIG_RPXLITE) #define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE" @@ -70,4 +70,4 @@ static int pcmcia_hardware_disable(int slot) #endif -#endif /* CONFIG_PCMCIA && (CONFIG_RPXCLASSIC || CONFIG_RPXLITE) */ +#endif /* CONFIG_PCMCIA && CONFIG_RPXLITE */ diff --git a/include/common.h b/include/common.h index 580615b..baf361b 100644 --- a/include/common.h +++ b/include/common.h @@ -505,10 +505,6 @@ extern ssize_t spi_read (uchar *, int, uchar *, int); extern ssize_t spi_write (uchar *, int, uchar *, int); #endif -#ifdef CONFIG_RPXCLASSIC -void rpxclassic_init (void); -#endif - void rpxlite_init (void); #ifdef CONFIG_HERMES diff --git a/include/commproc.h b/include/commproc.h index 605aac2..29a3e61 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -954,41 +954,6 @@ typedef struct scc_enet { #endif /* CONFIG_QS860T */ -/*** RPXCLASSIC *****************************************************/ - -#ifdef CONFIG_RPXCLASSIC - -#ifdef CONFIG_FEC_ENET - -# define FEC_ENET /* use FEC for EThernet */ -# undef SCC_ENET - -#else /* ! CONFIG_FEC_ENET */ - -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. - */ -#define PROFF_ENET PROFF_SCC1 -#define CPM_CR_ENET CPM_CR_CH_SCC1 -#define SCC_ENET 0 -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#define PB_ENET_TENA ((uint)0x00001000) -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000003d) - -#endif /* CONFIG_FEC_ENET */ - -#endif /* CONFIG_RPXCLASSIC */ - /*** RPXLITE ********************************************************/ #ifdef CONFIG_RPXLITE diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h deleted file mode 100644 index 0f07d0c..0000000 --- a/include/configs/RPXClassic.h +++ /dev/null @@ -1,483 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define RPXClassic_50MHz - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC860 1 -#define CONFIG_RPXCLASSIC 1 - -#define CONFIG_SYS_TEXT_BASE 0xff000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ - -/* Define CONFIG_FEC_ENET to use Fast ethernet instead of ethernet on SCC1 */ -#define CONFIG_FEC_ENET -#ifdef CONFIG_FEC_ENET -#define CONFIG_SYS_DISCOVER_PHY 1 -#define CONFIG_MII 1 -#endif /* CONFIG_FEC_ENET */ -#define CONFIG_MISC_INIT_R - -/* Video console (graphic: Epson SED13806 on ECCX board, no keyboard */ -#if 1 -#define CONFIG_VIDEO_SED13806 -#define CONFIG_NEC_NL6448BC20 -#define CONFIG_VIDEO_SED13806_16BPP - -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_CONSOLE_EXTRA_INFO -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_VIDEO_SW_CURSOR -#endif - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_ZERO_BOOTDELAY_CHECK 1 - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ELF - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_RESET_ADDRESS 0x80000000 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0040000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFA200000 - -/*----------------------------------------------------------------------------- - * I2C Configuration - *----------------------------------------------------------------------------- - */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0x34 - - -/* enable I2C and select the hardware/software driver */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ - -#if defined(CONFIG_SYS_I2C_SOFT) -#define CONFIG_SYS_I2C 1 -/* - * Software (bit-bang) I2C driver configuration - */ -#define I2C_PORT 1 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00000010) -#define I2C_TRISTATE (iop->pdir &= ~0x00000010) -#define I2C_READ ((iop->pdat & 0x00000010) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00000010; \ - else iop->pdat &= ~0x00000010 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00000020; \ - else iop->pdat &= ~0x00000020 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - - -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x34 -#endif - -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM X24C16 */ -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 - -#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || defined(CONFIG_CMD_IDE) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE 0xFF000000 -/*%%% #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#if 0 -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x20000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x8000 -#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ -#else -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_ADDR 0xfa000100 -#define CONFIG_ENV_SIZE 0x1000 -#endif - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWP) - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR ( (4 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS | PLPRCR_SPLSS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF00 -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/* #define CONFIG_SYS_DER 0x2002000F */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */ - -/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V) - -/* - * BR1 and OR1 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x01000000 /* max 16 MB */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00 - -#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* RPXLITE mem setting */ -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* BCSR */ -#define CONFIG_SYS_OR3_PRELIM 0xff7f8970 -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ -#define CONFIG_SYS_OR4_PRELIM 0xFFF80970 - -/* ECCX CS settings */ -#define SED13806_OR 0xFFC00108 /* - 4 Mo - - Burst inhibit - - external TA */ -#define SED13806_REG_ADDR 0xa0000000 -#define SED13806_ACCES 0x801 /* 16 bit access */ - - -/* Global definitions for the ECCX board */ -#define ECCX_CSR_ADDR (0xfac00000) -#define ECCX_CSR8_OFFSET (0x8) -#define ECCX_CSR11_OFFSET (0xB) -#define ECCX_CSR12_OFFSET (0xC) - -#define ECCX_CSR8 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR8_OFFSET) -#define ECCX_CSR11 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR11_OFFSET) -#define ECCX_CSR12 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR12_OFFSET) - - -#define REG_GPIO_CTRL 0x008 - -/* Definitions for CSR8 */ -#define ECCX_ENEPSON 0x80 /* Bit 0: - 0= disable and reset SED1386 - 1= enable SED1386 */ -/* Bit 1: 0= SED1386 in Big Endian mode */ -/* 1= SED1386 in little endian mode */ -#define ECCX_LE 0x40 -#define ECCX_BE 0x00 - -/* Bit 2,3: Selection */ -/* 00 = Disabled */ -/* 01 = CS2 is used for the SED1386 */ -/* 10 = CS5 is used for the SED1386 */ -/* 11 = reserved */ -#define ECCX_CS2 0x10 -#define ECCX_CS5 0x20 - -/* Definitions for CSR12 */ -#define ECCX_ID 0x02 -#define ECCX_860 0x01 - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 58 - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV8 - -/* - * MAMR settings for SDRAM - */ - -/* 10 column SDRAM */ -#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 | \ - MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X) - -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ -/* Configuration variable added by yooth. */ -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ - -/* - * BCSRx - * - * Board Status and Control Registers - * - */ - -#define BCSR0 0xFA400000 -#define BCSR1 0xFA400001 -#define BCSR2 0xFA400002 -#define BCSR3 0xFA400003 - -#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ -#define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ -#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ -#define BCSR0_COLTEST 0x20 -#define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 - -#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ -#define BCSR1_PCVCTL6 0x02 -#define BCSR1_PCVCTL5 0x04 -#define BCSR1_PCVCTL4 0x08 -#define BCSR1_IPB5SEL 0x10 - -#define BCSR2_MIIRST 0x80 -#define BCSR2_MIIPWRDWN 0x40 -#define BCSR2_MIICTL 0x08 - -#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ -#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ -#define BCSR3_RDY_BSY 0x04 /* Flash Operation */ -#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - - -/* - * Environment setting - */ - -/* #define CONFIG_ETHADDR 00:10:EC:00:2C:A2 */ -/* #define CONFIG_IPADDR 10.10.106.1 */ -/* #define CONFIG_SERVERIP 10.10.104.11 */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h deleted file mode 100644 index a28230a..0000000 --- a/include/configs/RPXlite.h +++ /dev/null @@ -1,395 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define RPXLite_50MHz - -/* - * High Level Configuration Options - * (easy to change) - */ - -#undef CONFIG_MPC860 -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_RPXLITE 1 - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ - -/* enable I2C and select the hardware/software driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 40000 /* 40 kHz is supposed to work */ -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -/* Software (bit-bang) I2C driver configuration */ -#define PB_SCL 0x00000020 /* PB 26 */ -#define PB_SDA 0x00000010 /* PB 27 */ - -#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) -#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) -#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) -#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) -#define I2C_SDA(bit) if (bit) \ - immr->im_cpm.cp_pbdat |= PB_SDA; \ - else \ - immr->im_cpm.cp_pbdat &= ~PB_SDA -#define I2C_SCL(bit) if (bit) \ - immr->im_cpm.cp_pbdat |= PB_SCL; \ - else \ - immr->im_cpm.cp_pbdat &= ~PB_SCL -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -/* M41T11 Serial Access Timekeeper(R) SRAM */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -/* play along with the linux driver */ -#define CONFIG_SYS_M41T11_BASE_YEAR 1900 - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_RESET_ADDRESS 0x09900000 - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFA200000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#ifdef CONFIG_BZIP2 -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */ -#else -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ -#endif /* CONFIG_BZIP2 */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 19 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - -#define CONFIG_ENV_OVERWRITE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF00 -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */ - -/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V) - -/* - * BR1 and OR1 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x01000000 /* max 16 MB */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00 - -#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* RPXLITE mem setting */ -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* BCSR */ -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8910 -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ -#define CONFIG_SYS_OR4_PRELIM 0xFFFE0970 - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 58 - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV8 - -/* - * MAMR settings for SDRAM - */ - -/* 10 column SDRAM */ -#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 | \ - MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X) - -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ -/* Configuration variable added by yooth. */ -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ - -/* - * BCSRx - * - * Board Status and Control Registers - * - */ - -#define BCSR0 0xFA400000 -#define BCSR1 0xFA400001 -#define BCSR2 0xFA400002 -#define BCSR3 0xFA400003 - -#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ -#define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ -#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ -#define BCSR0_COLTEST 0x20 -#define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 - -#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ -#define BCSR1_PCVCTL6 0x02 -#define BCSR1_PCVCTL5 0x04 -#define BCSR1_PCVCTL4 0x08 -#define BCSR1_IPB5SEL 0x10 - -#define BCSR2_ENPA5HDR 0x08 /* USB Control */ -#define BCSR2_ENUSBCLK 0x10 -#define BCSR2_USBPWREN 0x20 -#define BCSR2_USBSPD 0x40 -#define BCSR2_USBSUSP 0x80 - -#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ -#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ -#define BCSR3_RDY_BSY 0x04 /* Flash Operation */ -#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - -#endif /* __CONFIG_H */ diff --git a/include/pcmcia.h b/include/pcmcia.h index 1ad3e63..952a67c 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -22,7 +22,7 @@ #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) /* The RPX series use SLOT_B */ -#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE) +#if defined(CONFIG_RPXLITE) # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_FADS) /* The FADS series are a mess */ # if defined(CONFIG_MPC86x) || defined(CONFIG_MPC821) diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c index 53c0e4d..d122500 100644 --- a/post/cpu/mpc8xx/ether.c +++ b/post/cpu/mpc8xx/ether.c @@ -365,11 +365,6 @@ static void scc_init (int scc_index) immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC | SCC_PSMR_NIB22 | SCC_PSMR_LPB; -#ifdef CONFIG_RPXCLASSIC - *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK; - *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX); -#endif - #ifdef CONFIG_RPXLITE *((uchar *) BCSR0) |= BCSR0_ETHEN; #endif @@ -386,8 +381,6 @@ static void scc_init (int scc_index) */ #if defined (CONFIG_FADS) udelay (10000); /* wait 10 ms */ -#elif defined(CONFIG_RPXCLASSIC) - udelay (100000); /* wait 100 ms */ #endif } diff --git a/post/cpu/mpc8xx/uart.c b/post/cpu/mpc8xx/uart.c index 25d63d8..5214c71 100644 --- a/post/cpu/mpc8xx/uart.c +++ b/post/cpu/mpc8xx/uart.c @@ -106,7 +106,7 @@ static void smc_init (int smc_index) ~(smc_index == 1 ? BCSR1_RS232EN_1 : BCSR1_RS232EN_2); #endif -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) +#if defined(CONFIG_RPXLITE) /* Enable Monitor Port Transceiver */ *((uchar *) BCSR0) |= BCSR0_ENMONXCVR; #endif -- 2.7.4