From 4ef4f1a6155571d3d53583a4e8e7ccbbec220b8a Mon Sep 17 00:00:00 2001 From: Xingui Yang Date: Mon, 17 Oct 2022 17:20:31 +0800 Subject: [PATCH] scsi: hisi_sas: Modify v3 HW SATA disk error state completion processing When an NCQ error occurs, the controller will abnormally complete the I/Os that are newly delivered to disk, and bit8 in CQ dw3 will be set which indicates that the SATA disk is in error state. The current processing flow is to set ts->stat to SAS_OPEN_REJECT and then sas_ata_task_done() will set FIS stat to ATA_ERR. After analyzing the I/O by ata_eh_analyze_tf(), err_mask will set to AC_ERR_HSM. If media error occurs for four times within 10 minutes and the chip rejects new I/Os for four times, NCQ will be disabled due to excessive errors, which is undesirable. Therefore, use sas_task_abort() to handle abnormally completed I/Os when SATA disk is in error state, as these abnormally completed I/Os are already processed by sas_ata_device_link_abort() and qc->flag are set to ATA_QCFLAG_FAILED. If sas_task_abort() is used, qc->err_mask will not be modified in EH. Unlike the current process flow, it will not increase the count of ECAT_TOUT_HSM and not turn off NCQ. Like other I/Os on the disk that do not have an error but do not return after the NCQ error, they are retried after the EH. Signed-off-by: Xingui Yang Signed-off-by: John Garry Link: https://lore.kernel.org/r/1665998435-199946-5-git-send-email-john.garry@huawei.com Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 0ae8a60..0c3fcb8 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -428,6 +428,8 @@ #define CMPLT_HDR_DEV_ID_OFF 16 #define CMPLT_HDR_DEV_ID_MSK (0xffff << CMPLT_HDR_DEV_ID_OFF) /* dw3 */ +#define SATA_DISK_IN_ERROR_STATUS_OFF 8 +#define SATA_DISK_IN_ERROR_STATUS_MSK (0x1 << SATA_DISK_IN_ERROR_STATUS_OFF) #define CMPLT_HDR_SATA_DISK_ERR_OFF 16 #define CMPLT_HDR_SATA_DISK_ERR_MSK (0x1 << CMPLT_HDR_SATA_DISK_ERR_OFF) #define CMPLT_HDR_IO_IN_TARGET_OFF 17 @@ -2219,7 +2221,8 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, } else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) { ts->residual = trans_tx_fail_type; ts->stat = SAS_DATA_UNDERRUN; - } else if (dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) { + } else if ((dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) || + (dw3 & SATA_DISK_IN_ERROR_STATUS_MSK)) { ts->stat = SAS_PHY_DOWN; slot->abort = 1; } else { -- 2.7.4