From 4e7392b2ac6ed95b4ccacdec2f2e9e8e00c929c4 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Fri, 17 Feb 2017 10:56:40 +0800 Subject: [PATCH] mmc: dw_mmc: move dw_mci_reset forward to avoid declaration No functional change intended. Signed-off-by: Shawn Lin Signed-off-by: Jaehoon Chung Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 131 +++++++++++++++++++++++----------------------- 1 file changed, 65 insertions(+), 66 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 5372460..e057f55 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -107,7 +107,6 @@ struct idmac_desc { /* Each descriptor can transfer up to 4KB of data in chained mode */ #define DW_MCI_DESC_DATA_LENGTH 0x1000 -static bool dw_mci_reset(struct dw_mci *host); static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset); static int dw_mci_card_busy(struct mmc_host *mmc); static int dw_mci_get_cd(struct mmc_host *mmc); @@ -1681,6 +1680,71 @@ static int dw_mci_prepare_hs400_tuning(struct mmc_host *mmc, return 0; } +static bool dw_mci_reset(struct dw_mci *host) +{ + u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET; + bool ret = false; + + /* + * Resetting generates a block interrupt, hence setting + * the scatter-gather pointer to NULL. + */ + if (host->sg) { + sg_miter_stop(&host->sg_miter); + host->sg = NULL; + } + + if (host->use_dma) + flags |= SDMMC_CTRL_DMA_RESET; + + if (dw_mci_ctrl_reset(host, flags)) { + /* + * In all cases we clear the RAWINTS register to clear any + * interrupts. + */ + mci_writel(host, RINTSTS, 0xFFFFFFFF); + + /* if using dma we wait for dma_req to clear */ + if (host->use_dma) { + u32 status; + + if (readl_poll_timeout_atomic(host->regs + SDMMC_STATUS, + status, + !(status & SDMMC_STATUS_DMA_REQ), + 1, 500 * USEC_PER_MSEC)) { + dev_err(host->dev, + "%s: Timeout waiting for dma_req to clear during reset\n", + __func__); + goto ciu_out; + } + + /* when using DMA next we reset the fifo again */ + if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET)) + goto ciu_out; + } + } else { + /* if the controller reset bit did clear, then set clock regs */ + if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) { + dev_err(host->dev, + "%s: fifo/dma reset bits didn't clear but ciu was reset, doing clock update\n", + __func__); + goto ciu_out; + } + } + + if (host->use_dma == TRANS_MODE_IDMAC) + /* It is also recommended that we reset and reprogram idmac */ + dw_mci_idmac_reset(host); + + ret = true; + +ciu_out: + /* After a CTRL reset we need to have CIU set clock registers */ + mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0); + + return ret; +} + static const struct mmc_host_ops dw_mci_ops = { .request = dw_mci_request, .pre_req = dw_mci_pre_req, @@ -2844,71 +2908,6 @@ static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset) return true; } -static bool dw_mci_reset(struct dw_mci *host) -{ - u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET; - bool ret = false; - - /* - * Reseting generates a block interrupt, hence setting - * the scatter-gather pointer to NULL. - */ - if (host->sg) { - sg_miter_stop(&host->sg_miter); - host->sg = NULL; - } - - if (host->use_dma) - flags |= SDMMC_CTRL_DMA_RESET; - - if (dw_mci_ctrl_reset(host, flags)) { - /* - * In all cases we clear the RAWINTS register to clear any - * interrupts. - */ - mci_writel(host, RINTSTS, 0xFFFFFFFF); - - /* if using dma we wait for dma_req to clear */ - if (host->use_dma) { - u32 status; - - if (readl_poll_timeout_atomic(host->regs + SDMMC_STATUS, - status, - !(status & SDMMC_STATUS_DMA_REQ), - 1, 500 * USEC_PER_MSEC)) { - dev_err(host->dev, - "%s: Timeout waiting for dma_req to clear during reset\n", - __func__); - goto ciu_out; - } - - /* when using DMA next we reset the fifo again */ - if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET)) - goto ciu_out; - } - } else { - /* if the controller reset bit did clear, then set clock regs */ - if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) { - dev_err(host->dev, - "%s: fifo/dma reset bits didn't clear but ciu was reset, doing clock update\n", - __func__); - goto ciu_out; - } - } - - if (host->use_dma == TRANS_MODE_IDMAC) - /* It is also recommended that we reset and reprogram idmac */ - dw_mci_idmac_reset(host); - - ret = true; - -ciu_out: - /* After a CTRL reset we need to have CIU set clock registers */ - mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0); - - return ret; -} - static void dw_mci_cmd11_timer(unsigned long arg) { struct dw_mci *host = (struct dw_mci *)arg; -- 2.7.4