From 4e21a555c1dc2eacee9e3ad07f3b112c20b0f7a2 Mon Sep 17 00:00:00 2001 From: Camelia Groza Date: Wed, 16 Jun 2021 17:47:31 +0530 Subject: [PATCH] board: freescale: t208xrdb: add Linux fdt fix-ups for rev D The T2080RDB boards revisions D and up have updated 10G Aquantia PHYs connected to MAC1 and MAC2. The second Aquantia PHY is located at a different address on the MDIO bus compared to rev C (0x8 instead of 0x1). Fix-up the Linux device tree to update the PHY address for the second Aquantia PHY on boards revisions D and up. Also rename the PHY node to reflect the changes. Signed-off-by: Camelia Groza [Rebased] Signed-off-by: Priyanka Jain --- board/freescale/t208xrdb/eth_t208xrdb.c | 35 +++++++++++++++++++++++++++++++++ board/freescale/t208xrdb/t208xrdb.c | 1 + board/freescale/t208xrdb/t208xrdb.h | 1 + include/configs/T208xRDB.h | 6 +++++- 4 files changed, 42 insertions(+), 1 deletion(-) diff --git a/board/freescale/t208xrdb/eth_t208xrdb.c b/board/freescale/t208xrdb/eth_t208xrdb.c index 4b44b16..e4592ea 100644 --- a/board/freescale/t208xrdb/eth_t208xrdb.c +++ b/board/freescale/t208xrdb/eth_t208xrdb.c @@ -26,6 +26,8 @@ #include #include +extern u8 get_hw_revision(void); + /* Disable the MAC5 and MAC6 "fsl,fman-memac" nodes and the two * "fsl,dpa-ethernet" nodes that reference them. */ @@ -60,6 +62,39 @@ void fdt_fixup_board_fman_ethernet(void *fdt) } } +/* Update the address of the second Aquantia PHY on boards revision D and up. + * Also rename the PHY node to align with the address change. + */ +void fdt_fixup_board_phy(void *fdt) +{ + const char phy_path[] = + "/soc@ffe000000/fman@400000/mdio@fd000/ethernet-phy@1"; + int ret, offset, new_addr = AQR113C_PHY_ADDR2; + char new_name[] = "ethernet-phy@00"; + + if (get_hw_revision() == 'C') + return; + + offset = fdt_path_offset(fdt, phy_path); + if (offset < 0) { + printf("ethernet-phy@1 node not found in the dts\n"); + return; + } + + ret = fdt_setprop(fdt, offset, "reg", &new_addr, sizeof(new_addr)); + if (ret < 0) { + printf("Unable to set 'reg' for node ethernet-phy@1: %s\n", + fdt_strerror(ret)); + return; + } + + sprintf(new_name, "ethernet-phy@%x", new_addr); + ret = fdt_set_name(fdt, offset, new_name); + if (ret < 0) + printf("Unable to rename node ethernet-phy@1: %s\n", + fdt_strerror(ret)); +} + void fdt_fixup_board_enet(void *fdt) { return; diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c index f7fa65d..1f0cdee 100644 --- a/board/freescale/t208xrdb/t208xrdb.c +++ b/board/freescale/t208xrdb/t208xrdb.c @@ -153,6 +153,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_board_fman_ethernet(blob); fdt_fixup_board_enet(blob); + fdt_fixup_board_phy(blob); #endif return 0; diff --git a/board/freescale/t208xrdb/t208xrdb.h b/board/freescale/t208xrdb/t208xrdb.h index cd0a9f4..edbc860 100644 --- a/board/freescale/t208xrdb/t208xrdb.h +++ b/board/freescale/t208xrdb/t208xrdb.h @@ -10,5 +10,6 @@ void fdt_fixup_board_enet(void *blob); void pci_of_setup(void *blob, struct bd_info *bd); void fdt_fixup_board_fman_ethernet(void *blob); +void fdt_fixup_board_phy(void *blob); #endif diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index b5197b3..9449e30 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -537,8 +537,12 @@ unsigned long get_board_ddr_clk(void); #define RGMII_PHY2_ADDR 0x02 #define CORTINA_PHY_ADDR1 0x0c /* Cortina CS4315 */ #define CORTINA_PHY_ADDR2 0x0d -#define FM1_10GEC3_PHY_ADDR 0x00 /* Aquantia AQ1202 10G Base-T */ +/* Aquantia AQ1202 10G Base-T used by board revisions up to C */ +#define FM1_10GEC3_PHY_ADDR 0x00 #define FM1_10GEC4_PHY_ADDR 0x01 +/* Aquantia AQR113C 10G Base-T used by board revisions D and up */ +#define AQR113C_PHY_ADDR1 0x00 +#define AQR113C_PHY_ADDR2 0x08 #endif #ifdef CONFIG_FMAN_ENET -- 2.7.4