From 4df35b38d12c0c5630efe373870b5f557262af57 Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Fri, 25 Nov 2022 09:54:53 +0200 Subject: [PATCH] ARM: dts: at91: sama7g5/sama7g5ek: align DT with kernel 6.1 Align the DT with current Linux 6.1 tree, wherever possible. Signed-off-by: Eugen Hristev Reviewed-by: Claudiu Beznea --- arch/arm/dts/at91-sama7g5ek.dts | 23 +++++++++++------------ arch/arm/dts/sama7g5.dtsi | 27 ++++++++++++++++----------- 2 files changed, 27 insertions(+), 23 deletions(-) diff --git a/arch/arm/dts/at91-sama7g5ek.dts b/arch/arm/dts/at91-sama7g5ek.dts index aed84f1..9b247fc 100644 --- a/arch/arm/dts/at91-sama7g5ek.dts +++ b/arch/arm/dts/at91-sama7g5ek.dts @@ -45,13 +45,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - bp1 { + button { label = "PB_USER"; gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>; linux,code = ; @@ -244,8 +244,8 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -264,8 +264,8 @@ vddioddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1450000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -285,8 +285,8 @@ vddcore: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -306,7 +306,7 @@ vddcpu: VDD_OTHER { regulator-name = "VDD_OTHER"; regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1850000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-ramp-delay = <3125>; @@ -326,8 +326,8 @@ vldo1: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; regulator-state-standby { @@ -707,7 +707,6 @@ ck_cd_rstn_vddsel { pinmux = , , - , ; slew-rate = <0>; bias-pull-up; diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi index d38090d..6388a60 100644 --- a/arch/arm/dts/sama7g5.dtsi +++ b/arch/arm/dts/sama7g5.dtsi @@ -15,6 +15,7 @@ #include #include #include +#include / { model = "Microchip SAMA7G5 family SoC"; @@ -195,11 +196,11 @@ , , ; - clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; }; pmc: pmc@e0018000 { @@ -211,6 +212,13 @@ clock-names = "td_slck", "md_slck", "main_xtal", "main_rc"; }; + reset_controller: reset-controller@e001d000 { + compatible = "microchip,sama7g5-rstc"; + reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>; + #reset-cells = <1>; + clocks = <&clk32k 0>; + }; + shdwc: shdwc@e001d010 { compatible = "microchip,sama7g5-shdwc", "syscon"; reg = <0xe001d010 0x10>; @@ -229,13 +237,6 @@ clocks = <&clk32k 0>; }; - reset_controller: rstc@e001d000 { - compatible = "microchip,sama7g5-rstc", "microchip,sam9x60-rstc"; - reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>; - #reset-cells = <1>; - clocks = <&clk32k 0>; - }; - clk32k: clock-controller@e001d050 { compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc"; reg = <0xe001d050 0x4>; @@ -620,6 +621,7 @@ uart0: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = ; clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "usart"; @@ -668,6 +670,7 @@ uart3: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = ; clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; clock-names = "usart"; @@ -711,6 +714,7 @@ uart4: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = ; clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; clock-names = "usart"; @@ -736,6 +740,7 @@ uart7: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = ; clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; clock-names = "usart"; @@ -884,9 +889,9 @@ #address-cells = <1>; #size-cells = <0>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>, - <&dma0 AT91_XDMAC_DT_PERID(28)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>, + <&dma0 AT91_XDMAC_DT_PERID(27)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; -- 2.7.4