From 4d0e62679f17b8bde01aa9995233b5b9ca05ab7f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 26 Jun 2020 16:36:38 +0200 Subject: [PATCH] dt-bindings: pinctrl: renesas,rza2-pinctrl: Convert to json-schema MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Convert the Renesas RZ/A2 combined Pin and GPIO controller Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven Reviewed-by: Rob Herring Reviewed-by: Niklas Söderlund Link: https://lore.kernel.org/r/20200626143638.16512-1-geert+renesas@glider.be --- .../bindings/pinctrl/renesas,rza2-pinctrl.txt | 87 ------------------ .../bindings/pinctrl/renesas,rza2-pinctrl.yaml | 100 +++++++++++++++++++++ 2 files changed, 100 insertions(+), 87 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt deleted file mode 100644 index a63ccd4..0000000 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt +++ /dev/null @@ -1,87 +0,0 @@ -Renesas RZ/A2 combined Pin and GPIO controller - -The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO controller. -Pin multiplexing and GPIO configuration is performed on a per-pin basis. -Each port features up to 8 pins, each of them configurable for GPIO -function (port mode) or in alternate function mode. -Up to 8 different alternate function modes exist for each single pin. - -Pin controller node -------------------- - -Required properties: - - compatible: shall be: - - "renesas,r7s9210-pinctrl": for RZ/A2M - - reg - Address base and length of the memory area where the pin controller - hardware is mapped to. - - gpio-controller - This pin controller also controls pins as GPIO - - #gpio-cells - Must be 2 - - gpio-ranges - Expresses the total number of GPIO ports/pins in this SoC - -Example: Pin controller node for RZ/A2M SoC (r7s9210) - - pinctrl: pin-controller@fcffe000 { - compatible = "renesas,r7s9210-pinctrl"; - reg = <0xfcffe000 0x1000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl 0 0 176>; - }; - -Sub-nodes ---------- - -The child nodes of the pin controller designate pins to be used for -specific peripheral functions or as GPIO. - -- Pin multiplexing sub-nodes: - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - The values for the pinmux properties are a combination of port name, pin - number and the desired function index. Use the RZA2_PINMUX macro located - in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily define these. - For assigning GPIO pins, use the macro RZA2_PIN also in r7s9210-pinctrl.h - to express the desired port pin. - - Required properties: - - pinmux: - integer array representing pin number and pin multiplexing configuration. - When a pin has to be configured in alternate function mode, use this - property to identify the pin by its global index, and provide its - alternate function configuration number along with it. - When multiple pins are required to be configured as part of the same - alternate function they shall be specified as members of the same - argument list of a single "pinmux" property. - Helper macros to ease assembling the pin index from its position - (port where it sits on and pin number) and alternate function identifier - are provided by the pin controller header file at: - - Integers values in "pinmux" argument list are assembled as: - ((PORT * 8 + PIN) | MUX_FUNC << 16) - - Example: Board specific pins configuration - - &pinctrl { - /* Serial Console */ - scif4_pins: serial4 { - pinmux = , /* TxD4 */ - ; /* RxD4 */ - }; - }; - - Example: Assigning a GPIO: - - leds { - status = "okay"; - compatible = "gpio-leds"; - - led0 { - /* P6_0 */ - gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml new file mode 100644 index 0000000..b7911a9 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rza2-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A2 combined Pin and GPIO controller + +maintainers: + - Chris Brandt + - Geert Uytterhoeven + +description: + The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO + controller. + Pin multiplexing and GPIO configuration is performed on a per-pin basis. + Each port features up to 8 pins, each of them configurable for GPIO function + (port mode) or in alternate function mode. + Up to 8 different alternate function modes exist for each single pin. + +properties: + compatible: + const: "renesas,r7s9210-pinctrl" # RZ/A2M + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: + The first cell contains the global GPIO port index, constructed using the + RZA2_PIN() helper macro in r7s9210-pinctrl.h. + E.g. "RZA2_PIN(PORT6, 0)" for P6_0. + + gpio-ranges: + maxItems: 1 + +patternProperties: + "^.*$": + if: + type: object + then: + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + description: + The child nodes of the pin controller designate pins to be used for + specific peripheral functions or as GPIO. + + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, + pin number and the desired function index. Use the RZA2_PINMUX macro + located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily + define these. + For assigning GPIO pins, use the macro RZA2_PIN also in + to express the desired port pin. + + properties: + phandle: true + + pinmux: + description: + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZA2_PINMUX() + helper macro in r7s9210-pinctrl.h. + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include + pinctrl: pin-controller@fcffe000 { + compatible = "renesas,r7s9210-pinctrl"; + reg = <0xfcffe000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 176>; + + /* Serial Console */ + scif4_pins: serial4 { + pinmux = , /* TxD4 */ + ; /* RxD4 */ + }; + }; -- 2.7.4