From 4cc76c609f379a503f443f5a5fdeda00a832139e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 5 Apr 2012 03:30:35 +0000 Subject: [PATCH] i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC This SD DMA function of i.MX28 is still apparently too experimental to be enabled by default in 2012.04 release. Enable this feature only if the user plans to tinker with DCache or explicitly enables it. Signed-off-by: Marek Vasut Cc: Stefano Babic Cc: Wolfgang Denk Cc: Detlev Zundel Cc: Fabio Estevam --- drivers/mmc/mxsmmc.c | 48 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index e8bad9dc75..dfceaef953 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -43,6 +43,13 @@ #include #include +/* + * CONFIG_MXS_MMC_DMA: This feature is highly experimental and has no + * performance benefit unless you operate the platform with + * data cache enabled. This is disabled by default, enable + * only if you know what you're doing. + */ + struct mxsmmc_priv { int id; struct mx28_ssp_regs *regs; @@ -66,8 +73,13 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) struct mx28_ssp_regs *ssp_regs = priv->regs; uint32_t reg; int timeout; - uint32_t data_count, cache_data_count; + uint32_t data_count; uint32_t ctrl0; +#ifndef CONFIG_MXS_MMC_DMA + uint32_t *data_ptr; +#else + uint32_t cache_data_count; +#endif debug("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx); @@ -185,7 +197,9 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) return 0; data_count = data->blocksize * data->blocks; + timeout = MXSMMC_MAX_TIMEOUT; +#ifdef CONFIG_MXS_MMC_DMA if (data_count % ARCH_DMA_MINALIGN) cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); else @@ -218,6 +232,38 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) invalidate_dcache_range((uint32_t)priv->desc->cmd.address, (uint32_t)(priv->desc->cmd.address + cache_data_count)); } +#else + if (data->flags & MMC_DATA_READ) { + data_ptr = (uint32_t *)data->dest; + while (data_count && --timeout) { + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & SSP_STATUS_FIFO_EMPTY)) { + *data_ptr++ = readl(&ssp_regs->hw_ssp_data); + data_count -= 4; + timeout = MXSMMC_MAX_TIMEOUT; + } else + udelay(1000); + } + } else { + data_ptr = (uint32_t *)data->src; + timeout *= 100; + while (data_count && --timeout) { + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & SSP_STATUS_FIFO_FULL)) { + writel(*data_ptr++, &ssp_regs->hw_ssp_data); + data_count -= 4; + timeout = MXSMMC_MAX_TIMEOUT; + } else + udelay(1000); + } + } + + if (!timeout) { + printf("MMC%d: Data timeout with command %d (status 0x%08x)!\n", + mmc->block_dev.dev, cmd->cmdidx, reg); + return COMM_ERR; + } +#endif /* Check data errors */ reg = readl(&ssp_regs->hw_ssp_status); -- 2.34.1