From 4c99cb9190358e11ad96ba95b38d1e83cc053b46 Mon Sep 17 00:00:00 2001 From: York Sun Date: Mon, 27 Jun 2011 13:35:25 -0700 Subject: [PATCH] powerpc/mpc8xxx: fix DDR data width checking Checking width before setting DDR controller. SPD for DDR1 and DDR2 has data width and primary sdram width. The latter one has different meaning for DDR3. Signed-off-by: York Sun Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc8xxx/ddr/options.c | 35 ++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 02efe58..bd9c466 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -423,14 +423,33 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, * presuming all dimms are similar * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit */ - if (pdimm[0].primary_sdram_width == 64) - popts->data_bus_width = 0; - else if (pdimm[0].primary_sdram_width == 32) - popts->data_bus_width = 1; - else if (pdimm[0].primary_sdram_width == 16) - popts->data_bus_width = 2; - else - panic("Error: invalid primary sdram width!\n"); +#if defined(CONFIG_FSL_DDR1) || defined(CONFIG_FSL_DDR2) + if (pdimm[0].n_ranks != 0) { + if ((pdimm[0].data_width >= 64) && \ + (pdimm[0].data_width <= 72)) + popts->data_bus_width = 0; + else if ((pdimm[0].data_width >= 32) || \ + (pdimm[0].data_width <= 40)) + popts->data_bus_width = 1; + else { + panic("Error: data width %u is invalid!\n", + pdimm[0].data_width); + } + } +#else + if (pdimm[0].n_ranks != 0) { + if (pdimm[0].primary_sdram_width == 64) + popts->data_bus_width = 0; + else if (pdimm[0].primary_sdram_width == 32) + popts->data_bus_width = 1; + else if (pdimm[0].primary_sdram_width == 16) + popts->data_bus_width = 2; + else { + panic("Error: primary sdram width %u is invalid!\n", + pdimm[0].primary_sdram_width); + } + } +#endif /* Choose burst length. */ #if defined(CONFIG_FSL_DDR3) -- 2.7.4