From 4b91ac9e389d177e8f1af5d4499c6025e866c850 Mon Sep 17 00:00:00 2001 From: Iswara Nagulendran Date: Fri, 19 Aug 2022 14:10:08 -0400 Subject: [PATCH] drm/amd/display: Fix primary EDP link detection [HOW&WHY] EDP link detection must be updated to support a primary EDP with a link index of greater than 0. * SWDEV-342936 - dc: DSC bringup for SAG 1.5 [WHY] SmartAccess Graphics 1.5 (a.k.a SmartMux 1.5) requires seamless switching between GPUs with DSC enabled. [HOW] Moved DSC programming to apply_single_control_ctx_to_hw before the stream enablement logic to ensure the CRC checker provides valid values for non-black frames allowing the system to come out of forced PSR on d2i. Added additional logic to both generate a black frame through setVisibility calls and keep track of the CRCs values for this black frame when coming out of forced PSR. Updating logic for DalRegKey_DisableDSC to disable DSC on EDP and all ports for systems. [CLEANED] dc: Moved DSC programming to before stream enablement [HOW&WHY] Moved DSC programming to apply_single_control_ctx_to_hw before the stream enablement logic. Co-authored-by: sregolui Reviewed-by: Jayendran Ramani Reviewed-by: Harry Vanzylldejong Acked-by: Brian Chang Signed-off-by: sregolui Signed-off-by: Iswara Nagulendran Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 12 ------------ drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 13 +++++++++++++ 2 files changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index 74db87f..38fa63d 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -4303,18 +4303,6 @@ void core_link_enable_stream( if (pipe_ctx->stream->dpms_off) return; - /* Have to setup DSC before DIG FE and BE are connected (which happens before the - * link training). This is to make sure the bandwidth sent to DIG BE won't be - * bigger than what the link and/or DIG BE can handle. VBID[6]/CompressedStream_flag - * will be automatically set at a later time when the video is enabled - * (DP_VID_STREAM_EN = 1). - */ - if (pipe_ctx->stream->timing.flags.DSC) { - if (dc_is_dp_signal(pipe_ctx->stream->signal) || - dc_is_virtual_signal(pipe_ctx->stream->signal)) - dp_set_dsc_enable(pipe_ctx, true); - } - status = enable_link(state, pipe_ctx); if (status != DC_OK) { diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 801206a..fe346e9 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1577,6 +1577,19 @@ static enum dc_status apply_single_controller_ctx_to_hw( if (dc_is_dp_signal(pipe_ctx->stream->signal)) dp_source_sequence_trace(link, DPCD_SOURCE_SEQ_AFTER_CONNECT_DIG_FE_OTG); + /* Have to setup DSC before DIG FE and BE are connected (which happens before the + * link training). This is to make sure the bandwidth sent to DIG BE won't be + * bigger than what the link and/or DIG BE can handle. VBID[6]/CompressedStream_flag + * will be automatically set at a later time when the video is enabled + * (DP_VID_STREAM_EN = 1). + */ + if (pipe_ctx->stream->timing.flags.DSC) { + if (dc_is_dp_signal(pipe_ctx->stream->signal) || + dc_is_virtual_signal(pipe_ctx->stream->signal)) + dp_set_dsc_enable(pipe_ctx, true); + + } + if (!stream->dpms_off) { if (dc->hwss.update_phy_state) dc->hwss.update_phy_state(context, pipe_ctx, TX_ON_SYMCLK_ON); -- 2.7.4