From 4b1f0c31f96c45e8521dd84aae50f2aa4aecfb7b Mon Sep 17 00:00:00 2001 From: Colin Parker Date: Mon, 28 Aug 2017 16:21:39 -0700 Subject: [PATCH] IIO: BME280: Updates to Humidity readings need ctrl_reg write! The ctrl_reg register needs to be written after any write to the humidity registers. The value written to the ctrl_reg register does not necessarily need to change, but a write operation must occur. The regmap_update_bits functions will not write to a register if the register value matches the value to be written. This saves unnecessary bus operations. The change in this patch forces a bus write during the chip_config operation by switching to regmap_write_bits. This will fix issues where the Humidity Sensor Oversampling bits are not updated after initialization. Signed-off-by: Colin Parker Acked-by: Andreas Klinger Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index d82b788..e442c52 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -558,7 +558,7 @@ static int bmp280_chip_config(struct bmp280_data *data) u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) | BMP280_OSRS_PRESS_X(data->oversampling_press + 1); - ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS, + ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS, BMP280_OSRS_TEMP_MASK | BMP280_OSRS_PRESS_MASK | BMP280_MODE_MASK, -- 2.7.4