From 4af81f02b49c8bd7e4a89046e16c34507b3d8fdc Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 3 Jul 2019 21:39:04 +0200 Subject: [PATCH] mt76: mt7615: sync with mt7603 rate control changes - Store the previous and current rate set in the driver + the TSF value at the time of the switch. - Use the tx status TSF value to determine which rate set needs to be used as reference. - Report only short or long GI rates for a single status event, not a mix. - The hardware reports the last used rate index. Use it along with the retry count to figure out what rate was used for the first attempt. - Use the same retry count value for all rate slots to make this calculation work. - Derive the probe rate from the current rateset instead of the skb cb - Do not wait for a status report for the probe frame before removing the probe rate from the rate table. Do it immediately after it was referenced in a tx status report. - Use the first half of the first rate retry budget for the probe rate in order to avoid using too many retries on that rate - Switch from lower rates to higher rates more conservatively - enable hardware rate up/down selection Reviewed-by: Ryder Lee Signed-off-by: Felix Fietkau --- drivers/net/wireless/mediatek/mt76/mt7615/init.c | 19 ++- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 129 +++++++++++++++------ drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h | 11 +- drivers/net/wireless/mediatek/mt76/mt7615/regs.h | 9 ++ 4 files changed, 124 insertions(+), 44 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c index a6c2a13..280db94 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c @@ -45,11 +45,19 @@ static void mt7615_mac_init(struct mt7615_dev *dev) mt76_wr(dev, MT_DMA_DCR0, MT_DMA_DCR0_RX_VEC_DROP | FIELD_PREP(MT_DMA_DCR0_MAX_RX_LEN, 3072)); - mt76_wr(dev, MT_AGG_ARUCR, FIELD_PREP(MT_AGG_ARxCR_LIMIT(0), 7)); + mt76_wr(dev, MT_AGG_ARUCR, + FIELD_PREP(MT_AGG_ARxCR_LIMIT(0), 7) | + FIELD_PREP(MT_AGG_ARxCR_LIMIT(1), 2) | + FIELD_PREP(MT_AGG_ARxCR_LIMIT(2), 2) | + FIELD_PREP(MT_AGG_ARxCR_LIMIT(3), 2) | + FIELD_PREP(MT_AGG_ARxCR_LIMIT(4), 1) | + FIELD_PREP(MT_AGG_ARxCR_LIMIT(5), 1) | + FIELD_PREP(MT_AGG_ARxCR_LIMIT(6), 1) | + FIELD_PREP(MT_AGG_ARxCR_LIMIT(7), 1)); + mt76_wr(dev, MT_AGG_ARDCR, - FIELD_PREP(MT_AGG_ARxCR_LIMIT(0), 0) | - FIELD_PREP(MT_AGG_ARxCR_LIMIT(1), - max_t(int, 0, MT7615_RATE_RETRY - 2)) | + FIELD_PREP(MT_AGG_ARxCR_LIMIT(0), MT7615_RATE_RETRY - 1) | + FIELD_PREP(MT_AGG_ARxCR_LIMIT(1), MT7615_RATE_RETRY - 1) | FIELD_PREP(MT_AGG_ARxCR_LIMIT(2), MT7615_RATE_RETRY - 1) | FIELD_PREP(MT_AGG_ARxCR_LIMIT(3), MT7615_RATE_RETRY - 1) | FIELD_PREP(MT_AGG_ARxCR_LIMIT(4), MT7615_RATE_RETRY - 1) | @@ -58,8 +66,7 @@ static void mt7615_mac_init(struct mt7615_dev *dev) FIELD_PREP(MT_AGG_ARxCR_LIMIT(7), MT7615_RATE_RETRY - 1)); mt76_wr(dev, MT_AGG_ARCR, - (MT_AGG_ARCR_INIT_RATE1 | - FIELD_PREP(MT_AGG_ARCR_RTS_RATE_THR, 2) | + (FIELD_PREP(MT_AGG_ARCR_RTS_RATE_THR, 2) | MT_AGG_ARCR_RATE_DOWN_RATIO_EN | FIELD_PREP(MT_AGG_ARCR_RATE_DOWN_RATIO, 1) | FIELD_PREP(MT_AGG_ARCR_RATE_UP_EXTRA_TH, 4))); diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c index b896d8c..5bfb459 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c @@ -451,6 +451,7 @@ void mt7615_mac_set_rates(struct mt7615_dev *dev, struct mt7615_sta *sta, struct ieee80211_tx_rate *probe_rate, struct ieee80211_tx_rate *rates) { + struct ieee80211_tx_rate *ref; int wcid = sta->wcid.idx; u32 addr = MT_WTBL_BASE + wcid * MT_WTBL_ENTRY_SIZE; bool stbc = false; @@ -459,7 +460,8 @@ void mt7615_mac_set_rates(struct mt7615_dev *dev, struct mt7615_sta *sta, u16 val[4]; u16 probe_val; u32 w5, w27; - int i; + bool rateset; + int i, k; if (!mt76_poll(dev, MT_WTBL_UPDATE, MT_WTBL_UPDATE_BUSY, 0, 5000)) return; @@ -467,6 +469,43 @@ void mt7615_mac_set_rates(struct mt7615_dev *dev, struct mt7615_sta *sta, for (i = n_rates; i < 4; i++) rates[i] = rates[n_rates - 1]; + rateset = !(sta->rate_set_tsf & BIT(0)); + memcpy(sta->rateset[rateset].rates, rates, + sizeof(sta->rateset[rateset].rates)); + if (probe_rate) { + sta->rateset[rateset].probe_rate = *probe_rate; + ref = &sta->rateset[rateset].probe_rate; + } else { + sta->rateset[rateset].probe_rate.idx = -1; + ref = &sta->rateset[rateset].rates[0]; + } + + rates = sta->rateset[rateset].rates; + for (i = 0; i < ARRAY_SIZE(sta->rateset[rateset].rates); i++) { + /* + * We don't support switching between short and long GI + * within the rate set. For accurate tx status reporting, we + * need to make sure that flags match. + * For improved performance, avoid duplicate entries by + * decrementing the MCS index if necessary + */ + if ((ref->flags ^ rates[i].flags) & IEEE80211_TX_RC_SHORT_GI) + rates[i].flags ^= IEEE80211_TX_RC_SHORT_GI; + + for (k = 0; k < i; k++) { + if (rates[i].idx != rates[k].idx) + continue; + if ((rates[i].flags ^ rates[k].flags) & + (IEEE80211_TX_RC_40_MHZ_WIDTH | + IEEE80211_TX_RC_80_MHZ_WIDTH | + IEEE80211_TX_RC_160_MHZ_WIDTH)) + continue; + + rates[i].idx--; + } + + } + val[0] = mt7615_mac_tx_rate_val(dev, &rates[0], stbc, &bw); bw_prev = bw; @@ -513,17 +552,17 @@ void mt7615_mac_set_rates(struct mt7615_dev *dev, struct mt7615_sta *sta, mt76_wr(dev, MT_WTBL_RIUCR1, FIELD_PREP(MT_WTBL_RIUCR1_RATE0, probe_val) | FIELD_PREP(MT_WTBL_RIUCR1_RATE1, val[0]) | - FIELD_PREP(MT_WTBL_RIUCR1_RATE2_LO, val[0])); + FIELD_PREP(MT_WTBL_RIUCR1_RATE2_LO, val[1])); mt76_wr(dev, MT_WTBL_RIUCR2, - FIELD_PREP(MT_WTBL_RIUCR2_RATE2_HI, val[0] >> 8) | + FIELD_PREP(MT_WTBL_RIUCR2_RATE2_HI, val[1] >> 8) | FIELD_PREP(MT_WTBL_RIUCR2_RATE3, val[1]) | - FIELD_PREP(MT_WTBL_RIUCR2_RATE4, val[1]) | + FIELD_PREP(MT_WTBL_RIUCR2_RATE4, val[2]) | FIELD_PREP(MT_WTBL_RIUCR2_RATE5_LO, val[2])); mt76_wr(dev, MT_WTBL_RIUCR3, FIELD_PREP(MT_WTBL_RIUCR3_RATE5_HI, val[2] >> 4) | - FIELD_PREP(MT_WTBL_RIUCR3_RATE6, val[2]) | + FIELD_PREP(MT_WTBL_RIUCR3_RATE6, val[3]) | FIELD_PREP(MT_WTBL_RIUCR3_RATE7, val[3])); mt76_wr(dev, MT_WTBL_UPDATE, @@ -533,6 +572,9 @@ void mt7615_mac_set_rates(struct mt7615_dev *dev, struct mt7615_sta *sta, mt76_wr(dev, addr + 27 * 4, w27); + mt76_set(dev, MT_LPON_T0CR, MT_LPON_T0CR_MODE); /* TSF read */ + sta->rate_set_tsf = (mt76_rr(dev, MT_LPON_UTTR0) & ~BIT(0)) | rateset; + if (!(sta->wcid.tx_info & MT_WCID_TX_INFO_SET)) mt76_poll(dev, MT_WTBL_UPDATE, MT_WTBL_UPDATE_BUSY, 0, 5000); @@ -562,9 +604,9 @@ int mt7615_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr, if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) { spin_lock_bh(&dev->mt76.lock); - msta->rate_probe = true; mt7615_mac_set_rates(dev, msta, &info->control.rates[0], msta->rates); + msta->rate_probe = true; spin_unlock_bh(&dev->mt76.lock); } @@ -616,9 +658,13 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta, struct ieee80211_tx_info *info, __le32 *txs_data) { struct ieee80211_supported_band *sband; - int i, idx, count, final_idx = 0; + struct mt7615_rate_set *rs; + int first_idx = 0, last_idx; + int i, idx, count; bool fixed_rate, ack_timeout; bool probe, ampdu, cck = false; + bool rs_idx; + u32 rate_set_tsf; u32 final_rate, final_rate_flags, final_nss, txs; fixed_rate = info->status.rates[0].count; @@ -629,6 +675,7 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta, txs = le32_to_cpu(txs_data[3]); count = FIELD_GET(MT_TXS3_TX_COUNT, txs); + last_idx = FIELD_GET(MT_TXS3_LAST_TX_RATE, txs); txs = le32_to_cpu(txs_data[0]); final_rate = FIELD_GET(MT_TXS0_TX_RATE, txs); @@ -650,38 +697,56 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta, if (ampdu || (info->flags & IEEE80211_TX_CTL_AMPDU)) info->flags |= IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_CTL_AMPDU; + first_idx = max_t(int, 0, last_idx - (count + 1) / MT7615_RATE_RETRY); + if (fixed_rate && !probe) { info->status.rates[0].count = count; + i = 0; goto out; } - for (i = 0, idx = 0; i < ARRAY_SIZE(info->status.rates); i++) { - int cur_count = min_t(int, count, 2 * MT7615_RATE_RETRY); + rate_set_tsf = READ_ONCE(sta->rate_set_tsf); + rs_idx = !((u32)(FIELD_GET(MT_TXS4_F0_TIMESTAMP, le32_to_cpu(txs_data[4])) - + rate_set_tsf) < 1000000); + rs_idx ^= rate_set_tsf & BIT(0); + rs = &sta->rateset[rs_idx]; - if (!i && probe) { - cur_count = 1; - } else { - info->status.rates[i] = sta->rates[idx]; - idx++; - } + if (!first_idx && rs->probe_rate.idx >= 0) { + info->status.rates[0] = rs->probe_rate; - if (i && info->status.rates[i].idx < 0) { - info->status.rates[i - 1].count += count; - break; + spin_lock_bh(&dev->mt76.lock); + if (sta->rate_probe) { + mt7615_mac_set_rates(dev, sta, NULL, sta->rates); + sta->rate_probe = false; } + spin_unlock_bh(&dev->mt76.lock); + } else + info->status.rates[0] = rs->rates[first_idx / 2]; + info->status.rates[0].count = 0; - if (!count) { - info->status.rates[i].idx = -1; - break; - } + for (i = 0, idx = first_idx; count && idx <= last_idx; idx++) { + struct ieee80211_tx_rate *cur_rate; + int cur_count; - info->status.rates[i].count = cur_count; - final_idx = i; + cur_rate = &rs->rates[idx / 2]; + cur_count = min_t(int, MT7615_RATE_RETRY, count); count -= cur_count; + + if (idx && (cur_rate->idx != info->status.rates[i].idx || + cur_rate->flags != info->status.rates[i].flags)) { + i++; + if (i == ARRAY_SIZE(info->status.rates)) + break; + + info->status.rates[i] = *cur_rate; + info->status.rates[i].count = 0; + } + + info->status.rates[i].count += cur_count; } out: - final_rate_flags = info->status.rates[final_idx].flags; + final_rate_flags = info->status.rates[i].flags; switch (FIELD_GET(MT_TX_RATE_MODE, final_rate)) { case MT_PHY_TYPE_CCK: @@ -713,8 +778,8 @@ out: return false; } - info->status.rates[final_idx].idx = final_rate; - info->status.rates[final_idx].flags = final_rate_flags; + info->status.rates[i].idx = final_rate; + info->status.rates[i].flags = final_rate_flags; return true; } @@ -735,16 +800,6 @@ static bool mt7615_mac_add_txs_skb(struct mt7615_dev *dev, if (skb) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) { - spin_lock_bh(&dev->mt76.lock); - if (sta->rate_probe) { - mt7615_mac_set_rates(dev, sta, NULL, - sta->rates); - sta->rate_probe = false; - } - spin_unlock_bh(&dev->mt76.lock); - } - if (!mt7615_fill_txs(dev, sta, info, txs_data)) { ieee80211_tx_info_clear_status(info); info->status.rates[0].idx = -1; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h index 1135023..2f43101 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h @@ -42,12 +42,21 @@ enum mt7615_hw_txq_id { MT7615_TXQ_FWDL, }; +struct mt7615_rate_set { + struct ieee80211_tx_rate probe_rate; + struct ieee80211_tx_rate rates[4]; +}; + struct mt7615_sta { struct mt76_wcid wcid; /* must be first */ struct mt7615_vif *vif; - struct ieee80211_tx_rate rates[8]; + struct ieee80211_tx_rate rates[4]; + + struct mt7615_rate_set rateset[2]; + u32 rate_set_tsf; + u8 rate_count; u8 n_rates; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/regs.h b/drivers/net/wireless/mediatek/mt76/mt7615/regs.h index ea40581..f2cd858 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/regs.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/regs.h @@ -187,6 +187,15 @@ #define MT_WTBL_W27_CC_BW_SEL GENMASK(6, 5) +#define MT_LPON_BASE 0x24200 +#define MT_LPON(_n) (MT_LPON_BASE + (_n)) + +#define MT_LPON_T0CR MT_LPON(0x010) +#define MT_LPON_T0CR_MODE GENMASK(1, 0) + +#define MT_LPON_UTTR0 MT_LPON(0x018) +#define MT_LPON_UTTR1 MT_LPON(0x01c) + #define MT_EFUSE_BASE 0x81070000 #define MT_EFUSE_BASE_CTRL 0x000 #define MT_EFUSE_BASE_CTRL_EMPTY BIT(30) -- 2.7.4