From 4aef72dbb2e8997e627dd94ae2b9109dc09fffaa Mon Sep 17 00:00:00 2001 From: "Rajanikanth H.V" Date: Sun, 18 Nov 2012 19:17:47 -0800 Subject: [PATCH] ab8500: Add devicetree support for charger This patch adds device tree support for ab8500-charger driver Signed-off-by: Rajanikanth H.V Signed-off-by: Anton Vorontsov --- Documentation/devicetree/bindings/mfd/ab8500.txt | 14 ++++ .../bindings/power_supply/ab8500/charger.txt | 25 ++++++++ arch/arm/boot/dts/dbx5x0.dtsi | 6 ++ drivers/mfd/ab8500-core.c | 5 ++ drivers/power/ab8500_charger.c | 74 +++++++++++++--------- 5 files changed, 95 insertions(+), 29 deletions(-) create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/charger.txt diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index f2ee0e7..13b707b 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -36,6 +36,20 @@ ab8500-btemp : : vtvout : Battery Temperature : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp +ab8500-charger : : vddadc : Charger interface + : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505) + : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505) + : MAIN_EXT_CH_NOT_OK : : main charger not OK + : MAIN_CH_TH_PROT_R : : Die temp is above main charger + : MAIN_CH_TH_PROT_F : : Die temp is below main charger + : VBUS_DET_F : : VBUS falling detected + : VBUS_DET_R : : VBUS rising detected + : USB_LINK_STATUS : : USB link status has changed + : USB_CH_TH_PROT_R : : Die temp is above usb charger + : USB_CH_TH_PROT_F : : Die temp is below usb charger + : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection + : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped) + : CH_WD_EXP : : Charger watchdog detected ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter SW_CONV_END : : ab8500-gpio : : : GPIO Controller diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt new file mode 100644 index 0000000..6bdbb08 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt @@ -0,0 +1,25 @@ +=== AB8500 Charger Driver === + +Required Properties: +- compatible = Shall be "stericsson,ab8500-charger" +- battery = Shall be battery specific information + Example: + ab8500_charger { + compatible = "stericsson,ab8500-charger"; + battery = <&ab8500_battery>; + }; + +- vddadc-supply: Supply for USB and Main charger + Example: + ab8500-charger { + vddadc-supply = <&ab8500_ldo_tvout_reg>; + } +- autopower_cfg: + Boolean value depicting the presence of 'automatic poweron after powerloss' + Example: + ab8500-charger { + autopower_cfg; + }; + +For information on battery specific node, Ref: +Documentation/devicetree/bindings/power_supply/ab8500/fg.txt diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index d170fad..1d4ad30 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -367,6 +367,12 @@ battery = <&ab8500_battery>; }; + ab8500_charger { + compatible = "stericsson,ab8500-charger"; + battery = <&ab8500_battery>; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + }; + ab8500_usb { compatible = "stericsson,ab8500-usb"; interrupts = < 90 0x4 diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 94d45be..c7a120b 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1041,8 +1041,13 @@ static struct mfd_cell __devinitdata abx500_common_devs[] = { static struct mfd_cell __devinitdata ab8500_bm_devs[] = { { .name = "ab8500-charger", + .of_compatible = "stericsson,ab8500-charger", .num_resources = ARRAY_SIZE(ab8500_charger_resources), .resources = ab8500_charger_resources, +#ifndef CONFIG_OF + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), +#endif }, { .name = "ab8500-btemp", diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index 723edb4..dddc947 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include #include @@ -181,9 +183,9 @@ struct ab8500_charger_usb_state { * @vbat Battery voltage * @old_vbat Previously measured battery voltage * @autopower Indicate if we should have automatic pwron after pwrloss + * @autopower_cfg platform specific power config support for "pwron after pwrloss" * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc - * @pdata: Pointer to the abx500_charger platform data * @bat: Pointer to the abx500_bm platform data * @flags: Structure for information about events triggered * @usb_state: Structure for usb stack information @@ -218,9 +220,9 @@ struct ab8500_charger { int vbat; int old_vbat; bool autopower; + bool autopower_cfg; struct ab8500 *parent; struct ab8500_gpadc *gpadc; - struct abx500_bmdevs_plat_data *pdata; struct abx500_bm_data *bat; struct ab8500_charger_event_flags flags; struct ab8500_charger_usb_state usb_state; @@ -322,7 +324,7 @@ static void ab8500_power_loss_handling(struct ab8500_charger *di) static void ab8500_power_supply_changed(struct ab8500_charger *di, struct power_supply *psy) { - if (di->pdata->autopower_cfg) { + if (di->autopower_cfg) { if (!di->usb.charger_connected && !di->ac.charger_connected && di->autopower) { @@ -2526,25 +2528,45 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev) power_supply_unregister(&di->usb_chg.psy); power_supply_unregister(&di->ac_chg.psy); platform_set_drvdata(pdev, NULL); - kfree(di); return 0; } +static char *supply_interface[] = { + "ab8500_chargalg", + "ab8500_fg", + "ab8500_btemp", +}; + static int __devinit ab8500_charger_probe(struct platform_device *pdev) { - struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; struct ab8500_charger *di; int irq, i, charger_status, ret = 0; - if (!plat_data) { - dev_err(&pdev->dev, "No platform data\n"); - return -EINVAL; - } - - di = kzalloc(sizeof(*di), GFP_KERNEL); - if (!di) + di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); + if (!di) { + dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__); return -ENOMEM; + } + di->bat = pdev->mfd_cell->platform_data; + if (!di->bat) { + if (np) { + ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); + if (ret) { + dev_err(&pdev->dev, + "failed to get battery information\n"); + return ret; + } + di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); + } else { + dev_err(&pdev->dev, "missing dt node for ab8500_charger\n"); + return -EINVAL; + } + } else { + dev_info(&pdev->dev, "falling back to legacy platform data\n"); + di->autopower_cfg = false; + } /* get parent data */ di->dev = &pdev->dev; @@ -2554,14 +2576,6 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) /* initialize lock */ spin_lock_init(&di->usb_state.usb_lock); - /* get charger specific platform data */ - di->pdata = plat_data; - if (!di->pdata) { - dev_err(di->dev, "no charger platform data supplied\n"); - ret = -EINVAL; - goto free_device_info; - } - di->autopower = false; /* AC supply */ @@ -2571,8 +2585,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) di->ac_chg.psy.properties = ab8500_charger_ac_props; di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props); di->ac_chg.psy.get_property = ab8500_charger_ac_get_property; - di->ac_chg.psy.supplied_to = di->pdata->supplied_to; - di->ac_chg.psy.num_supplicants = di->pdata->num_supplicants; + di->ac_chg.psy.supplied_to = supply_interface; + di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), /* ux500_charger sub-class */ di->ac_chg.ops.enable = &ab8500_charger_ac_en; di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; @@ -2589,8 +2603,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) di->usb_chg.psy.properties = ab8500_charger_usb_props; di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props); di->usb_chg.psy.get_property = ab8500_charger_usb_get_property; - di->usb_chg.psy.supplied_to = di->pdata->supplied_to; - di->usb_chg.psy.num_supplicants = di->pdata->num_supplicants; + di->usb_chg.psy.supplied_to = supply_interface; + di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), /* ux500_charger sub-class */ di->usb_chg.ops.enable = &ab8500_charger_usb_en; di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; @@ -2606,8 +2620,7 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) create_singlethread_workqueue("ab8500_charger_wq"); if (di->charger_wq == NULL) { dev_err(di->dev, "failed to create work queue\n"); - ret = -ENOMEM; - goto free_device_info; + return -ENOMEM; } /* Init work for HW failure check */ @@ -2749,12 +2762,14 @@ free_regulator: regulator_put(di->regu); free_charger_wq: destroy_workqueue(di->charger_wq); -free_device_info: - kfree(di); - return ret; } +static const struct of_device_id ab8500_charger_match[] = { + { .compatible = "stericsson,ab8500-charger", }, + { }, +}; + static struct platform_driver ab8500_charger_driver = { .probe = ab8500_charger_probe, .remove = __devexit_p(ab8500_charger_remove), @@ -2763,6 +2778,7 @@ static struct platform_driver ab8500_charger_driver = { .driver = { .name = "ab8500-charger", .owner = THIS_MODULE, + .of_match_table = ab8500_charger_match, }, }; -- 2.7.4