From 49d8c59927e7887ea168a040e41c22937e10c30b Mon Sep 17 00:00:00 2001 From: Yunfan Zhang Date: Sat, 8 Sep 2012 03:52:18 -0700 Subject: [PATCH] regulator: Fairchild fan53555 support This driver supports Fairchild FAN53555 Digitally Programmable TinyBuck Regulator. The FAN53555 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. Signed-off-by: Yunfan Zhang Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 11 ++ drivers/regulator/Makefile | 1 + drivers/regulator/fan53555.c | 325 +++++++++++++++++++++++++++++++++++++ include/linux/regulator/fan53555.h | 60 +++++++ 4 files changed, 397 insertions(+) create mode 100644 drivers/regulator/fan53555.c create mode 100644 include/linux/regulator/fan53555.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 1c6320c..a80abc4 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -110,6 +110,17 @@ config REGULATOR_DA9052 This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. +config REGULATOR_FAN53555 + tristate "Fairchild FAN53555 Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports Fairchild FAN53555 Digitally Programmable + TinyBuck Regulator. The FAN53555 is a step-down switching voltage + regulator that delivers a digitally programmable output from an + input voltage supply of 2.5V to 5.5V. The output voltage is + programmed through an I2C interface. + config REGULATOR_ANATOP tristate "Freescale i.MX on-chip ANATOP LDO regulators" depends on MFD_ANATOP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 3a0dbc5..e431eed 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o +obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c new file mode 100644 index 0000000..890f2b3 --- /dev/null +++ b/drivers/regulator/fan53555.c @@ -0,0 +1,325 @@ +/* + * FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver. + * + * Supported Part Numbers: + * FAN53555UC00X/01X/03X/04X/05X + * + * Copyright (c) 2012 Marvell Technology Ltd. + * Yunfan Zhang + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Voltage setting */ +#define FAN53555_VSEL0 0x00 +#define FAN53555_VSEL1 0x01 +/* Control register */ +#define FAN53555_CONTROL 0x02 +/* IC Type */ +#define FAN53555_ID1 0x03 +/* IC mask version */ +#define FAN53555_ID2 0x04 +/* Monitor register */ +#define FAN53555_MONITOR 0x05 + +/* VSEL bit definitions */ +#define VSEL_BUCK_EN (1 << 7) +#define VSEL_MODE (1 << 6) +#define VSEL_NSEL_MASK 0x3F +/* Chip ID and Verison */ +#define DIE_ID 0x0F /* ID1 */ +#define DIE_REV 0x0F /* ID2 */ +/* Control bit definitions */ +#define CTL_OUTPUT_DISCHG (1 << 7) +#define CTL_SLEW_MASK (0x7 << 4) +#define CTL_SLEW_SHIFT 4 +#define CTL_RESET (1 << 2) + +#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */ + +/* IC Type */ +enum { + FAN53555_CHIP_ID_00 = 0, + FAN53555_CHIP_ID_01, + FAN53555_CHIP_ID_02, + FAN53555_CHIP_ID_03, + FAN53555_CHIP_ID_04, + FAN53555_CHIP_ID_05, +}; + +struct fan53555_device_info { + struct regmap *regmap; + struct device *dev; + struct regulator_desc desc; + struct regulator_dev *rdev; + struct regulator_init_data *regulator; + /* IC Type and Rev */ + int chip_id; + int chip_rev; + /* Voltage setting register */ + unsigned int vol_reg; + unsigned int sleep_reg; + /* Voltage range and step(linear) */ + unsigned int vsel_min; + unsigned int vsel_max; + unsigned int vsel_step; + /* Voltage slew rate limiting */ + unsigned int slew_rate; + /* Sleep voltage cache */ + unsigned int sleep_vol_cache; +}; + +static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + int ret; + + if (di->sleep_vol_cache == uV) + return 0; + ret = regulator_map_voltage_linear(rdev, uV, uV); + if (ret < 0) + return -EINVAL; + ret = regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_NSEL_MASK, ret); + if (ret < 0) + return -EINVAL; + /* Cache the sleep voltage setting. + * Might not be the real voltage which is rounded */ + di->sleep_vol_cache = uV; + + return 0; +} + +static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + switch (mode) { + case REGULATOR_MODE_FAST: + regmap_update_bits(di->regmap, di->vol_reg, + VSEL_MODE, VSEL_MODE); + break; + case REGULATOR_MODE_NORMAL: + regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0); + break; + default: + return -EINVAL; + } + return 0; +} + +static unsigned int fan53555_get_mode(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + unsigned int val; + int ret = 0; + + ret = regmap_read(di->regmap, di->vol_reg, &val); + if (ret < 0) + return ret; + if (val & VSEL_MODE) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static struct regulator_ops fan53555_regulator_ops = { + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .set_suspend_voltage = fan53555_set_suspend_voltage, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_mode = fan53555_set_mode, + .get_mode = fan53555_get_mode, +}; + +/* For 00,01,03,05 options: + * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V. + * For 04 option: + * VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V. + * */ +static int fan53555_device_setup(struct fan53555_device_info *di, + struct fan53555_platform_data *pdata) +{ + unsigned int reg, data, mask; + + /* Setup voltage control register */ + switch (pdata->sleep_vsel_id) { + case FAN53555_VSEL_ID_0: + di->sleep_reg = FAN53555_VSEL0; + di->vol_reg = FAN53555_VSEL1; + break; + case FAN53555_VSEL_ID_1: + di->sleep_reg = FAN53555_VSEL1; + di->vol_reg = FAN53555_VSEL0; + break; + default: + dev_err(di->dev, "Invalid VSEL ID!\n"); + return -EINVAL; + } + /* Init voltage range and step */ + switch (di->chip_id) { + case FAN53555_CHIP_ID_00: + case FAN53555_CHIP_ID_01: + case FAN53555_CHIP_ID_03: + case FAN53555_CHIP_ID_05: + di->vsel_min = 600000; + di->vsel_max = 1230000; + di->vsel_step = 10000; + break; + case FAN53555_CHIP_ID_04: + di->vsel_min = 603000; + di->vsel_max = 1411000; + di->vsel_step = 12826; + break; + default: + dev_err(di->dev, + "Chip ID[%d]\n not supported!\n", di->chip_id); + return -EINVAL; + } + /* Init slew rate */ + if (pdata->slew_rate & 0x7) + di->slew_rate = pdata->slew_rate; + else + di->slew_rate = FAN53555_SLEW_RATE_64MV; + reg = FAN53555_CONTROL; + data = di->slew_rate << CTL_SLEW_SHIFT; + mask = CTL_SLEW_MASK; + return regmap_update_bits(di->regmap, reg, mask, data); +} + +static int fan53555_regulator_register(struct fan53555_device_info *di, + struct regulator_config *config) +{ + struct regulator_desc *rdesc = &di->desc; + + rdesc->name = "fan53555-reg"; + rdesc->ops = &fan53555_regulator_ops; + rdesc->type = REGULATOR_VOLTAGE; + rdesc->n_voltages = FAN53555_NVOLTAGES; + rdesc->enable_reg = di->vol_reg; + rdesc->enable_mask = VSEL_BUCK_EN; + rdesc->min_uV = di->vsel_min; + rdesc->uV_step = di->vsel_step; + rdesc->vsel_reg = di->vol_reg; + rdesc->vsel_mask = VSEL_NSEL_MASK; + rdesc->owner = THIS_MODULE; + + di->rdev = regulator_register(&di->desc, config); + if (IS_ERR(di->rdev)) + return PTR_ERR(di->rdev); + return 0; + +} + +static struct regmap_config fan53555_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int __devinit fan53555_regulator_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fan53555_device_info *di; + struct fan53555_platform_data *pdata; + struct regulator_config config = { }; + unsigned int val; + int ret; + + pdata = client->dev.platform_data; + if (!pdata || !pdata->regulator) { + dev_err(&client->dev, "Platform data not found!\n"); + return -ENODEV; + } + + di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info), + GFP_KERNEL); + if (!di) { + dev_err(&client->dev, "Failed to allocate device info data!\n"); + return -ENOMEM; + } + di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config); + if (IS_ERR(di->regmap)) { + dev_err(&client->dev, "Failed to allocate regmap!\n"); + return PTR_ERR(di->regmap); + } + di->dev = &client->dev; + di->regulator = pdata->regulator; + i2c_set_clientdata(client, di); + /* Get chip ID */ + ret = regmap_read(di->regmap, FAN53555_ID1, &val); + if (ret < 0) { + dev_err(&client->dev, "Failed to get chip ID!\n"); + return -ENODEV; + } + di->chip_id = val & DIE_ID; + /* Get chip revision */ + ret = regmap_read(di->regmap, FAN53555_ID2, &val); + if (ret < 0) { + dev_err(&client->dev, "Failed to get chip Rev!\n"); + return -ENODEV; + } + di->chip_rev = val & DIE_REV; + dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n", + di->chip_id, di->chip_rev); + /* Device init */ + ret = fan53555_device_setup(di, pdata); + if (ret < 0) { + dev_err(&client->dev, "Failed to setup device!\n"); + return ret; + } + /* Register regulator */ + config.dev = di->dev; + config.init_data = di->regulator; + config.regmap = di->regmap; + config.driver_data = di; + ret = fan53555_regulator_register(di, &config); + if (ret < 0) + dev_err(&client->dev, "Failed to register regulator!\n"); + return ret; + +} + +static int __devexit fan53555_regulator_remove(struct i2c_client *client) +{ + struct fan53555_device_info *di = i2c_get_clientdata(client); + + regulator_unregister(di->rdev); + return 0; +} + +static const struct i2c_device_id fan53555_id[] = { + {"fan53555", -1}, + { }, +}; + +static struct i2c_driver fan53555_regulator_driver = { + .driver = { + .name = "fan53555-regulator", + }, + .probe = fan53555_regulator_probe, + .remove = __devexit_p(fan53555_regulator_remove), + .id_table = fan53555_id, +}; + +module_i2c_driver(fan53555_regulator_driver); + +MODULE_AUTHOR("Yunfan Zhang "); +MODULE_DESCRIPTION("FAN53555 regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/fan53555.h b/include/linux/regulator/fan53555.h new file mode 100644 index 0000000..5c45c85 --- /dev/null +++ b/include/linux/regulator/fan53555.h @@ -0,0 +1,60 @@ +/* + * fan53555.h - Fairchild Regulator FAN53555 Driver + * + * Copyright (C) 2012 Marvell Technology Ltd. + * Yunfan Zhang + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __FAN53555_H__ + +/* VSEL ID */ +enum { + FAN53555_VSEL_ID_0 = 0, + FAN53555_VSEL_ID_1, +}; + +/* Transition slew rate limiting from a low to high voltage. + * ----------------------- + * Bin |Slew Rate(mV/uS) + * ------|---------------- + * 000 | 64.00 + * ------|---------------- + * 001 | 32.00 + * ------|---------------- + * 010 | 16.00 + * ------|---------------- + * 011 | 8.00 + * ------|---------------- + * 100 | 4.00 + * ------|---------------- + * 101 | 2.00 + * ------|---------------- + * 110 | 1.00 + * ------|---------------- + * 111 | 0.50 + * ----------------------- + */ +enum { + FAN53555_SLEW_RATE_64MV = 0, + FAN53555_SLEW_RATE_32MV, + FAN53555_SLEW_RATE_16MV, + FAN53555_SLEW_RATE_8MV, + FAN53555_SLEW_RATE_4MV, + FAN53555_SLEW_RATE_2MV, + FAN53555_SLEW_RATE_1MV, + FAN53555_SLEW_RATE_0_5MV, +}; + +struct fan53555_platform_data { + struct regulator_init_data *regulator; + unsigned int slew_rate; + /* Sleep VSEL ID */ + unsigned int sleep_vsel_id; +}; + +#endif /* __FAN53555_H__ */ -- 2.7.4