From 49a94d74d9489647dfc3449ee135af4bf8fab2c1 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Tue, 19 Dec 2017 15:59:55 -0800 Subject: [PATCH] ixgbe: add ipsec engine start and stop routines Add in the code for running and stopping the hardware ipsec encryption/decryption engine. It is good to keep the engine off when not in use in order to save on the power draw. Signed-off-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 142 +++++++++++++++++++++++++ 1 file changed, 142 insertions(+) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c index c1228cf..d478730 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c @@ -152,10 +152,152 @@ static void ixgbe_ipsec_clear_hw_tables(struct ixgbe_adapter *adapter) } /** + * ixgbe_ipsec_stop_data + * @adapter: board private structure + **/ +static void ixgbe_ipsec_stop_data(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + bool link = adapter->link_up; + u32 t_rdy, r_rdy; + u32 limit; + u32 reg; + + /* halt data paths */ + reg = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL); + reg |= IXGBE_SECTXCTRL_TX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, reg); + + reg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + reg |= IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, reg); + + IXGBE_WRITE_FLUSH(hw); + + /* If the tx fifo doesn't have link, but still has data, + * we can't clear the tx sec block. Set the MAC loopback + * before block clear + */ + if (!link) { + reg = IXGBE_READ_REG(hw, IXGBE_MACC); + reg |= IXGBE_MACC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_MACC, reg); + + reg = IXGBE_READ_REG(hw, IXGBE_HLREG0); + reg |= IXGBE_HLREG0_LPBK; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg); + + IXGBE_WRITE_FLUSH(hw); + mdelay(3); + } + + /* wait for the paths to empty */ + limit = 20; + do { + mdelay(10); + t_rdy = IXGBE_READ_REG(hw, IXGBE_SECTXSTAT) & + IXGBE_SECTXSTAT_SECTX_RDY; + r_rdy = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT) & + IXGBE_SECRXSTAT_SECRX_RDY; + } while (!t_rdy && !r_rdy && limit--); + + /* undo loopback if we played with it earlier */ + if (!link) { + reg = IXGBE_READ_REG(hw, IXGBE_MACC); + reg &= ~IXGBE_MACC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_MACC, reg); + + reg = IXGBE_READ_REG(hw, IXGBE_HLREG0); + reg &= ~IXGBE_HLREG0_LPBK; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg); + + IXGBE_WRITE_FLUSH(hw); + } +} + +/** + * ixgbe_ipsec_stop_engine + * @adapter: board private structure + **/ +static void ixgbe_ipsec_stop_engine(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 reg; + + ixgbe_ipsec_stop_data(adapter); + + /* disable Rx and Tx SA lookup */ + IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, 0); + IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, 0); + + /* disable the Rx and Tx engines and full packet store-n-forward */ + reg = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL); + reg |= IXGBE_SECTXCTRL_SECTX_DIS; + reg &= ~IXGBE_SECTXCTRL_STORE_FORWARD; + IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, reg); + + reg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + reg |= IXGBE_SECRXCTRL_SECRX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, reg); + + /* restore the "tx security buffer almost full threshold" to 0x250 */ + IXGBE_WRITE_REG(hw, IXGBE_SECTXBUFFAF, 0x250); + + /* Set minimum IFG between packets back to the default 0x1 */ + reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG); + reg = (reg & 0xfffffff0) | 0x1; + IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg); + + /* final set for normal (no ipsec offload) processing */ + IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, IXGBE_SECTXCTRL_SECTX_DIS); + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, IXGBE_SECRXCTRL_SECRX_DIS); + + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_ipsec_start_engine + * @adapter: board private structure + * + * NOTE: this increases power consumption whether being used or not + **/ +static void ixgbe_ipsec_start_engine(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 reg; + + ixgbe_ipsec_stop_data(adapter); + + /* Set minimum IFG between packets to 3 */ + reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG); + reg = (reg & 0xfffffff0) | 0x3; + IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg); + + /* Set "tx security buffer almost full threshold" to 0x15 so that the + * almost full indication is generated only after buffer contains at + * least an entire jumbo packet. + */ + reg = IXGBE_READ_REG(hw, IXGBE_SECTXBUFFAF); + reg = (reg & 0xfffffc00) | 0x15; + IXGBE_WRITE_REG(hw, IXGBE_SECTXBUFFAF, reg); + + /* restart the data paths by clearing the DISABLE bits */ + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, 0); + IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, IXGBE_SECTXCTRL_STORE_FORWARD); + + /* enable Rx and Tx SA lookup */ + IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, IXGBE_RXTXIDX_IPS_EN); + IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, IXGBE_RXTXIDX_IPS_EN); + + IXGBE_WRITE_FLUSH(hw); +} + +/** * ixgbe_init_ipsec_offload - initialize security registers for IPSec operation * @adapter: board private structure **/ void ixgbe_init_ipsec_offload(struct ixgbe_adapter *adapter) { ixgbe_ipsec_clear_hw_tables(adapter); + ixgbe_ipsec_stop_engine(adapter); } -- 2.7.4