From 497db3ad89d6bc257519961cb89aa7dcda30a045 Mon Sep 17 00:00:00 2001 From: Hamish Martin Date: Fri, 21 Oct 2022 10:21:59 +1300 Subject: [PATCH] arm: armada: dts: Add clock to armada-ap80x uart1 The uart1 node was missing the 'clock-frequency' property. This meant the driver for this device would fail at probe. The clock for uart1 is fed from the same source as uart0 and is a fixed 200MHz clock. This is confirmed via documentation for the CN9130 SoC and from the equivalent code in Linux at: /arch/arm64/boot/dts/marvell/armada-ap80x.dtsi where uart0 and uart1 share a common 'clocks' definition. Signed-off-by: Hamish Martin Reviewed-by: Stefan Roese --- arch/arm/dts/armada-ap80x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/armada-ap80x.dtsi b/arch/arm/dts/armada-ap80x.dtsi index 8787a87..ab3c32e 100644 --- a/arch/arm/dts/armada-ap80x.dtsi +++ b/arch/arm/dts/armada-ap80x.dtsi @@ -181,7 +181,7 @@ reg-io-width = <1>; clocks = <&ap_syscon 3>; status = "disabled"; - + clock-frequency = <200000000>; }; watchdog: watchdog@610000 { -- 2.7.4