From 48f45b094dbbf23620929b68afd32e865f712272 Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Tue, 1 Feb 2022 14:06:58 +0100 Subject: [PATCH] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol Add a "linux,pump-express-vbus-max" property which indicates if the Pump Express+ protocol should be used to increase the charging protocol. If this new property is set and a DCP charger is detected then request a higher charging voltage through the Pump Express+ protocol. So far this new property is only used on x86/ACPI (non devicetree) devs, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing devicetree-bindings. Changes by Hans de Goede: - Port to my bq25890 patch-series + various cleanups - Make behavior configurable through a new "linux,pump-express-vbus-max" device-property - Sleep 1 second before re-checking the Vbus voltage after requesting it to be raised, to ensure that the ADC has time to sampled the new Vbus - Add VBUSV bq25890_tables[] entry and use it in bq25890_get_vbus_voltage() - Tweak commit message Signed-off-by: Yauhen Kharuzhy Reviewed-by: Andy Shevchenko Co-developed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel --- drivers/power/supply/bq25890_charger.c | 92 +++++++++++++++++++++++++++++++--- 1 file changed, 84 insertions(+), 8 deletions(-) diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index 3de72f0..179abed 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -27,6 +27,10 @@ #define BQ25895_ID 7 #define BQ25896_ID 0 +#define PUMP_EXPRESS_START_DELAY (5 * HZ) +#define PUMP_EXPRESS_MAX_TRIES 6 +#define PUMP_EXPRESS_VBUS_MARGIN_uV 1000000 + enum bq25890_chip_version { BQ25890, BQ25892, @@ -107,6 +111,7 @@ struct bq25890_device { struct usb_phy *usb_phy; struct notifier_block usb_nb; struct work_struct usb_work; + struct delayed_work pump_express_work; unsigned long usb_event; struct regmap *rmap; @@ -114,6 +119,7 @@ struct bq25890_device { bool skip_reset; bool read_back_init_data; + u32 pump_express_vbus_max; enum bq25890_chip_version chip_version; struct bq25890_init_data init_data; struct bq25890_state state; @@ -265,6 +271,7 @@ enum bq25890_table_ids { TBL_VREG, TBL_BOOSTV, TBL_SYSVMIN, + TBL_VBUSV, TBL_VBATCOMP, TBL_RBATCOMP, @@ -325,14 +332,15 @@ static const union { } bq25890_tables[] = { /* range tables */ /* TODO: BQ25896 has max ICHG 3008 mA */ - [TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */ - [TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */ - [TBL_IINLIM] = { .rt = {100000, 3250000, 50000} }, /* uA */ - [TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */ - [TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */ - [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */ - [TBL_VBATCOMP] ={ .rt = {0, 224000, 32000} }, /* uV */ - [TBL_RBATCOMP] ={ .rt = {0, 140000, 20000} }, /* uOhm */ + [TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */ + [TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */ + [TBL_IINLIM] = { .rt = {100000, 3250000, 50000} }, /* uA */ + [TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */ + [TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */ + [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */ + [TBL_VBUSV] = { .rt = {2600000, 15300000, 100000} }, /* uV */ + [TBL_VBATCOMP] = { .rt = {0, 224000, 32000} }, /* uV */ + [TBL_RBATCOMP] = { .rt = {0, 140000, 20000} }, /* uOhm */ /* lookup tables */ [TBL_TREG] = { .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} }, @@ -435,6 +443,17 @@ static bool bq25890_is_adc_property(enum power_supply_property psp) static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq); +static int bq25890_get_vbus_voltage(struct bq25890_device *bq) +{ + int ret; + + ret = bq25890_field_read(bq, F_VBUSV); + if (ret < 0) + return ret; + + return bq25890_find_val(ret, TBL_VBUSV); +} + static int bq25890_power_supply_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -613,6 +632,11 @@ static void bq25890_charger_external_power_changed(struct power_supply *psy) switch (val.intval) { case POWER_SUPPLY_USB_TYPE_DCP: input_current_limit = bq25890_find_idx(2000000, TBL_IINLIM); + if (bq->pump_express_vbus_max) { + queue_delayed_work(system_power_efficient_wq, + &bq->pump_express_work, + PUMP_EXPRESS_START_DELAY); + } break; case POWER_SUPPLY_USB_TYPE_CDP: case POWER_SUPPLY_USB_TYPE_ACA: @@ -878,6 +902,53 @@ static int bq25890_set_otg_cfg(struct bq25890_device *bq, u8 val) return ret; } +static void bq25890_pump_express_work(struct work_struct *data) +{ + struct bq25890_device *bq = + container_of(data, struct bq25890_device, pump_express_work.work); + int voltage, i, ret; + + dev_dbg(bq->dev, "Start to request input voltage increasing\n"); + + /* Enable current pulse voltage control protocol */ + ret = bq25890_field_write(bq, F_PUMPX_EN, 1); + if (ret < 0) + goto error_print; + + for (i = 0; i < PUMP_EXPRESS_MAX_TRIES; i++) { + voltage = bq25890_get_vbus_voltage(bq); + if (voltage < 0) + goto error_print; + dev_dbg(bq->dev, "input voltage = %d uV\n", voltage); + + if ((voltage + PUMP_EXPRESS_VBUS_MARGIN_uV) > + bq->pump_express_vbus_max) + break; + + ret = bq25890_field_write(bq, F_PUMPX_UP, 1); + if (ret < 0) + goto error_print; + + /* Note a single PUMPX up pulse-sequence takes 2.1s */ + ret = regmap_field_read_poll_timeout(bq->rmap_fields[F_PUMPX_UP], + ret, !ret, 100000, 3000000); + if (ret < 0) + goto error_print; + + /* Make sure ADC has sampled Vbus before checking again */ + msleep(1000); + } + + bq25890_field_write(bq, F_PUMPX_EN, 0); + + dev_info(bq->dev, "Hi-voltage charging requested, input voltage is %d mV\n", + voltage); + + return; +error_print: + dev_err(bq->dev, "Failed to request hi-voltage charging\n"); +} + static void bq25890_usb_work(struct work_struct *data) { int ret; @@ -1068,6 +1139,10 @@ static int bq25890_fw_probe(struct bq25890_device *bq) int ret; struct bq25890_init_data *init = &bq->init_data; + /* Optional, left at 0 if property is not present */ + device_property_read_u32(bq->dev, "linux,pump-express-vbus-max", + &bq->pump_express_vbus_max); + bq->skip_reset = device_property_read_bool(bq->dev, "linux,skip-reset"); bq->read_back_init_data = device_property_read_bool(bq->dev, "linux,read-back-settings"); @@ -1100,6 +1175,7 @@ static int bq25890_probe(struct i2c_client *client, bq->dev = dev; mutex_init(&bq->lock); + INIT_DELAYED_WORK(&bq->pump_express_work, bq25890_pump_express_work); bq->rmap = devm_regmap_init_i2c(client, &bq25890_regmap_config); if (IS_ERR(bq->rmap)) -- 2.7.4