From 48f44da4542d8f91d8b0603e20929b184dc2aa4e Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Sun, 25 Nov 2012 23:10:44 +0000 Subject: [PATCH] stmmac: get/set coalesce parameters via ethtool This patch is to get/set the tx/rx coalesce parameters via ethtool interface. Tests have been done on several platform with different GMAC chips w/o and w/ RX watchdog feature. V2: reject coalesce settings that are not supported. Signed-off-by: Giuseppe Cavallaro Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller --- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 83 ++++++++++++++++++++++ 1 file changed, 83 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index 7f7ccd2..1372ce2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -524,6 +524,87 @@ static int stmmac_ethtool_op_set_eee(struct net_device *dev, return phy_ethtool_set_eee(priv->phydev, edata); } +static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv) +{ + unsigned long clk = clk_get_rate(priv->stmmac_clk); + + if (!clk) + return 0; + + return (usec * (clk / 1000000)) / 256; +} + +static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv) +{ + unsigned long clk = clk_get_rate(priv->stmmac_clk); + + if (!clk) + return 0; + + return (riwt * 256) / (clk / 1000000); +} + +static int stmmac_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *ec) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + ec->tx_coalesce_usecs = priv->tx_coal_timer; + ec->tx_max_coalesced_frames = priv->tx_coal_frames; + + if (priv->use_riwt) + ec->rx_coalesce_usecs = stmmac_riwt2usec(priv->rx_riwt, priv); + + return 0; +} + +static int stmmac_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *ec) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int rx_riwt; + + /* Check not supported parameters */ + if ((ec->rx_max_coalesced_frames) || (ec->rx_coalesce_usecs_irq) || + (ec->rx_max_coalesced_frames_irq) || (ec->tx_coalesce_usecs_irq) || + (ec->use_adaptive_rx_coalesce) || (ec->use_adaptive_tx_coalesce) || + (ec->pkt_rate_low) || (ec->rx_coalesce_usecs_low) || + (ec->rx_max_coalesced_frames_low) || (ec->tx_coalesce_usecs_high) || + (ec->tx_max_coalesced_frames_low) || (ec->pkt_rate_high) || + (ec->tx_coalesce_usecs_low) || (ec->rx_coalesce_usecs_high) || + (ec->rx_max_coalesced_frames_high) || + (ec->tx_max_coalesced_frames_irq) || + (ec->stats_block_coalesce_usecs) || + (ec->tx_max_coalesced_frames_high) || (ec->rate_sample_interval)) + return -EOPNOTSUPP; + + if (ec->rx_coalesce_usecs == 0) + return -EINVAL; + + if ((ec->tx_coalesce_usecs == 0) && + (ec->tx_max_coalesced_frames == 0)) + return -EINVAL; + + if ((ec->tx_coalesce_usecs > STMMAC_COAL_TX_TIMER) || + (ec->tx_max_coalesced_frames > STMMAC_TX_MAX_FRAMES)) + return -EINVAL; + + rx_riwt = stmmac_usec2riwt(ec->rx_coalesce_usecs, priv); + + if ((rx_riwt > MAX_DMA_RIWT) || (rx_riwt < MIN_DMA_RIWT)) + return -EINVAL; + else if (!priv->use_riwt) + return -EOPNOTSUPP; + + /* Only copy relevant parameters, ignore all others. */ + priv->tx_coal_frames = ec->tx_max_coalesced_frames; + priv->tx_coal_timer = ec->tx_coalesce_usecs; + priv->rx_riwt = rx_riwt; + priv->hw->dma->rx_watchdog(priv->ioaddr, priv->rx_riwt); + + return 0; +} + static const struct ethtool_ops stmmac_ethtool_ops = { .begin = stmmac_check_if_running, .get_drvinfo = stmmac_ethtool_getdrvinfo, @@ -544,6 +625,8 @@ static const struct ethtool_ops stmmac_ethtool_ops = { .set_eee = stmmac_ethtool_op_set_eee, .get_sset_count = stmmac_get_sset_count, .get_ts_info = ethtool_op_get_ts_info, + .get_coalesce = stmmac_get_coalesce, + .set_coalesce = stmmac_set_coalesce, }; void stmmac_set_ethtool_ops(struct net_device *netdev) -- 2.7.4