From 48a6a468198aadb54bc5d3fdd065364d43ff5197 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 16 Sep 2010 15:12:28 -0400 Subject: [PATCH] ath9k: fix enabling ANI / tx monitor after bg scan ath9k's entire logic with SC_OP_SCANNING is incorrect due to the way mac80211 currently implements the scan complete callback and we handle it in ath9k. This patch removes the flag completely in preference for the SC_OP_OFFCHANNEL which is really what we wanted. The scanning flag was used to ensure we reset ANI to the old values when we go back to the home channel, but if we are offchannel we use some defaults. The flag was also used to re-enable the TX monitor. Without this patch we simply never re-enabled ANI and the TX monitor after going offchannel. This means that after one background scan we are prone to noise issues and if we had a TX hang we would not recover. To get this to work properly we must enable ANI after we have configured the beacon timers, otherwise hardware acts really oddly. This patch has stable fixes which apply down to [2.6.36+], there *may* be a to fix this on older kernels but requires a bit of work since this patch relies on the new mac80211 flag IEEE80211_CONF_OFFCHANNEL which was introduced as of 2.6.36. Cc: stable@kernel.org Cc: Paul Stewart Cc: Amod Bodas Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/main.c | 10 +++------- drivers/net/wireless/ath/ath9k/recv.c | 4 ++-- 3 files changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index c8ff417..98b57e6 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -563,7 +563,6 @@ struct ath_ant_comb { #define SC_OP_RXFLUSH BIT(7) #define SC_OP_LED_ASSOCIATED BIT(8) #define SC_OP_LED_ON BIT(9) -#define SC_OP_SCANNING BIT(10) #define SC_OP_TSF_RESET BIT(11) #define SC_OP_BT_PRIORITY_DETECTED BIT(12) #define SC_OP_BT_SCAN BIT(13) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 3295c63..5056733 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -255,14 +255,12 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, ath_update_txpow(sc); ath9k_hw_set_interrupts(ah, ah->imask); - if (!(sc->sc_flags & (SC_OP_OFFCHANNEL | SC_OP_SCANNING))) { - ath_start_ani(common); + if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) { + ath_beacon_config(sc, NULL); ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0); + ath_start_ani(common); } - if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) - ath_beacon_config(sc, NULL); - ps_restore: ath9k_ps_restore(sc); return r; @@ -2036,7 +2034,6 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw) aphy->state = ATH_WIPHY_SCAN; ath9k_wiphy_pause_all_forced(sc, aphy); - sc->sc_flags |= SC_OP_SCANNING; mutex_unlock(&sc->mutex); } @@ -2051,7 +2048,6 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw) mutex_lock(&sc->mutex); aphy->state = ATH_WIPHY_ACTIVE; - sc->sc_flags &= ~SC_OP_SCANNING; mutex_unlock(&sc->mutex); } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 3e7b8fe..007df33 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -300,7 +300,7 @@ static void ath_edma_start_recv(struct ath_softc *sc) ath_opmode_init(sc); - ath9k_hw_startpcureceive(sc->sc_ah, (sc->sc_flags & SC_OP_SCANNING)); + ath9k_hw_startpcureceive(sc->sc_ah, (sc->sc_flags & SC_OP_OFFCHANNEL)); } static void ath_edma_stop_recv(struct ath_softc *sc) @@ -506,7 +506,7 @@ int ath_startrecv(struct ath_softc *sc) start_recv: spin_unlock_bh(&sc->rx.rxbuflock); ath_opmode_init(sc); - ath9k_hw_startpcureceive(ah, (sc->sc_flags & SC_OP_SCANNING)); + ath9k_hw_startpcureceive(ah, (sc->sc_flags & SC_OP_OFFCHANNEL)); return 0; } -- 2.7.4