From 489a32650721b0e1e25283257cacb3a337014794 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 11 Nov 2016 12:39:31 -0800 Subject: [PATCH] i40e: move all updates for VLAN mode into i40e_sync_vsi_filters In a similar fashion to how we handled exiting VLAN mode, move the logic in i40e_vsi_add_vlan into i40e_sync_vsi_filters. Extract this logic into its own function for ease of understanding as it will become quite complex. The new function, i40e_correct_mac_vlan_filters() correctly updates all filters for when we need to enter VLAN mode, exit VLAN mode, and also enforces the PVID when assigned. Call i40e_correct_mac_vlan_filters from i40e_sync_vsi_filters passing it the number of active VLAN filters, and the two temporary lists. Remove the function for updating VLAN=0 filters from i40e_vsi_add_vlan. The end result is that the logic for entering and exiting VLAN mode is in one location which has the most knowledge about all filters. This ensures that we always correctly have the non-VLAN filters assigned to VID=0 or VID=-1 regardless of how we ended up getting to this result. Additionally this enforces the PVID at sync time so that we know for certain that an assigned PVID results in only filters with that PVID will be added to the firmware. Change-ID: I895cee81e9c92d0a16baee38bd0ca51bbb14e372 Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 214 +++++++++++++++------------- 1 file changed, 113 insertions(+), 101 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 49261cc..da4cbe3 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1227,6 +1227,107 @@ bool i40e_is_vsi_in_vlan(struct i40e_vsi *vsi) } /** + * i40e_correct_mac_vlan_filters - Correct non-VLAN filters if necessary + * @vsi: the VSI to configure + * @tmp_add_list: list of filters ready to be added + * @tmp_del_list: list of filters ready to be deleted + * @vlan_filters: the number of active VLAN filters + * + * Update VLAN=0 and VLAN=-1 (I40E_VLAN_ANY) filters properly so that they + * behave as expected. If we have any active VLAN filters remaining or about + * to be added then we need to update non-VLAN filters to be marked as VLAN=0 + * so that they only match against untagged traffic. If we no longer have any + * active VLAN filters, we need to make all non-VLAN filters marked as VLAN=-1 + * so that they match against both tagged and untagged traffic. In this way, + * we ensure that we correctly receive the desired traffic. This ensures that + * when we have an active VLAN we will receive only untagged traffic and + * traffic matching active VLANs. If we have no active VLANs then we will + * operate in non-VLAN mode and receive all traffic, tagged or untagged. + * + * Finally, in a similar fashion, this function also corrects filters when + * there is an active PVID assigned to this VSI. + * + * In case of memory allocation failure return -ENOMEM. Otherwise, return 0. + * + * This function is only expected to be called from within + * i40e_sync_vsi_filters. + * + * NOTE: This function expects to be called while under the + * mac_filter_hash_lock + */ +static int i40e_correct_mac_vlan_filters(struct i40e_vsi *vsi, + struct hlist_head *tmp_add_list, + struct hlist_head *tmp_del_list, + int vlan_filters) +{ + struct i40e_mac_filter *f, *add_head; + struct hlist_node *h; + int bkt, new_vlan; + + /* To determine if a particular filter needs to be replaced we + * have the three following conditions: + * + * a) if we have a PVID assigned, then all filters which are + * not marked as VLAN=PVID must be replaced with filters that + * are. + * b) otherwise, if we have any active VLANS, all filters + * which are marked as VLAN=-1 must be replaced with + * filters marked as VLAN=0 + * c) finally, if we do not have any active VLANS, all filters + * which are marked as VLAN=0 must be replaced with filters + * marked as VLAN=-1 + */ + + /* Update the filters about to be added in place */ + hlist_for_each_entry(f, tmp_add_list, hlist) { + if (vsi->info.pvid && f->vlan != vsi->info.pvid) + f->vlan = vsi->info.pvid; + else if (vlan_filters && f->vlan == I40E_VLAN_ANY) + f->vlan = 0; + else if (!vlan_filters && f->vlan == 0) + f->vlan = I40E_VLAN_ANY; + } + + /* Update the remaining active filters */ + hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) { + /* Combine the checks for whether a filter needs to be changed + * and then determine the new VLAN inside the if block, in + * order to avoid duplicating code for adding the new filter + * then deleting the old filter. + */ + if ((vsi->info.pvid && f->vlan != vsi->info.pvid) || + (vlan_filters && f->vlan == I40E_VLAN_ANY) || + (!vlan_filters && f->vlan == 0)) { + /* Determine the new vlan we will be adding */ + if (vsi->info.pvid) + new_vlan = vsi->info.pvid; + else if (vlan_filters) + new_vlan = 0; + else + new_vlan = I40E_VLAN_ANY; + + /* Create the new filter */ + add_head = i40e_add_filter(vsi, f->macaddr, new_vlan); + if (!add_head) + return -ENOMEM; + + /* Put the replacement filter into the add list */ + hash_del(&add_head->hlist); + hlist_add_head(&add_head->hlist, tmp_add_list); + + /* Put the original filter into the delete list */ + f->state = I40E_FILTER_REMOVE; + hash_del(&f->hlist); + hlist_add_head(&f->hlist, tmp_del_list); + } + } + + vsi->has_vlan_filter = !!vlan_filters; + + return 0; +} + +/** * i40e_rm_default_mac_filter - Remove the default MAC filter set by NVM * @vsi: the PF Main VSI - inappropriate for any other VSI * @macaddr: the MAC address @@ -1916,8 +2017,6 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) struct hlist_head tmp_add_list, tmp_del_list; struct i40e_mac_filter *f, *add_head = NULL; struct i40e_hw *hw = &vsi->back->hw; - unsigned int vlan_any_filters = 0; - unsigned int non_vlan_filters = 0; unsigned int failed_filters = 0; unsigned int vlan_filters = 0; bool promisc_changed = false; @@ -1974,66 +2073,21 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) hlist_add_head(&f->hlist, &tmp_add_list); } - /* Count the number of each type of filter we have - * remaining, ignoring any filters we're about to - * delete. + /* Count the number of active (current and new) VLAN + * filters we have now. Does not count filters which + * are marked for deletion. */ if (f->vlan > 0) vlan_filters++; - else if (!f->vlan) - non_vlan_filters++; - else - vlan_any_filters++; } - /* We should never have VLAN=-1 filters at the same time as we - * have either VLAN=0 or VLAN>0 filters, so warn about this - * case here to help catch any issues. - */ - WARN_ON(vlan_any_filters && (vlan_filters + non_vlan_filters)); - - /* If we only have VLAN=0 filters remaining, and don't have - * any other VLAN filters, we need to convert these VLAN=0 - * filters into VLAN=-1 (I40E_VLAN_ANY) so that we operate - * correctly in non-VLAN mode and receive all traffic tagged - * or untagged. - */ - if (non_vlan_filters && !vlan_filters) { - hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, - hlist) { - /* Only replace VLAN=0 filters */ - if (f->vlan) - continue; - - /* Allocate a replacement element */ - add_head = kzalloc(sizeof(*add_head), - GFP_KERNEL); - if (!add_head) - goto err_no_memory_locked; + retval = i40e_correct_mac_vlan_filters(vsi, + &tmp_add_list, + &tmp_del_list, + vlan_filters); + if (retval) + goto err_no_memory_locked; - /* Copy the filter, with new state and VLAN */ - *add_head = *f; - add_head->state = I40E_FILTER_NEW; - add_head->vlan = I40E_VLAN_ANY; - - /* Move the replacement to the add list */ - INIT_HLIST_NODE(&add_head->hlist); - hlist_add_head(&add_head->hlist, - &tmp_add_list); - - /* Move the original to the delete list */ - f->state = I40E_FILTER_REMOVE; - hash_del(&f->hlist); - hlist_add_head(&f->hlist, &tmp_del_list); - } - - /* Also update any filters on the tmp_add list */ - hlist_for_each_entry(f, &tmp_add_list, hlist) { - if (!f->vlan) - f->vlan = I40E_VLAN_ANY; - } - add_head = NULL; - } spin_unlock_bh(&vsi->mac_filter_hash_lock); } @@ -2098,14 +2152,6 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) del_list = NULL; } - /* After finishing notifying firmware of the deleted filters, update - * the cached value of vsi->has_vlan_filter. Note that we are safe to - * use just !!vlan_filters here because if we only have VLAN=0 (that - * is, non_vlan_filters) these will all be converted to VLAN=-1 in the - * logic above already so this value would still be correct. - */ - vsi->has_vlan_filter = !!vlan_filters; - if (!hlist_empty(&tmp_add_list)) { /* Do all the adds now. */ filter_list_len = hw->aq.asq_buf_size / @@ -2533,48 +2579,14 @@ int i40e_add_vlan_all_mac(struct i40e_vsi *vsi, s16 vid) **/ int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid) { - struct i40e_mac_filter *f, *add_f, *del_f; - struct hlist_node *h; - int bkt, err; + int err; /* Locked once because all functions invoked below iterates list*/ spin_lock_bh(&vsi->mac_filter_hash_lock); - err = i40e_add_vlan_all_mac(vsi, vid); - if (err) { - spin_unlock_bh(&vsi->mac_filter_hash_lock); - return err; - } - - /* When we add a new VLAN filter, we need to make sure that all existing - * filters which are marked as vid=-1 (I40E_VLAN_ANY) are converted to - * vid=0. The simplest way is just search for all filters marked as - * vid=-1 and replace them with vid=0. This converts all filters that - * were marked to receive all traffic (tagged or untagged) into - * filters to receive only untagged traffic, so that we don't receive - * tagged traffic for VLANs which we have not configured. - */ - if (vid > 0 && !vsi->info.pvid) { - hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) { - if (f->state == I40E_FILTER_REMOVE) - continue; - del_f = i40e_find_filter(vsi, f->macaddr, - I40E_VLAN_ANY); - if (!del_f) - continue; - add_f = i40e_add_filter(vsi, f->macaddr, 0); - if (!add_f) { - dev_info(&vsi->back->pdev->dev, - "Could not add filter 0 for %pM\n", - f->macaddr); - spin_unlock_bh(&vsi->mac_filter_hash_lock); - return -ENOMEM; - } - __i40e_del_filter(vsi, del_f); - } - } - spin_unlock_bh(&vsi->mac_filter_hash_lock); + if (err) + return err; /* schedule our worker thread which will take care of * applying the new filter changes -- 2.7.4