From 48936a08b85518c22a9467a8eaac35d43af54ab4 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Fri, 21 May 2010 10:16:12 -0400 Subject: [PATCH] powerpc/85xx: Add P1021MDS board support P1021 is a dual e500v2 core based SOC with: * 3 eTSECs (eTSEC1/3 RGMII, eTSEC2 SGMII on this board) * 2 PCIe Controller * 1 USB2.0 controller * eSDHC, eSPI, I2C, DUART * eLBC (NAND, BCSR, PMC0/1) * Security Engine (SEC 3.3.2) * Quicc Engine (QE) Signed-off-by: Haiying Wang Signed-off-by: Yu Liu Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1021mds.dts | 698 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/mpc85xx_mds.c | 102 ++++- 2 files changed, 797 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/boot/dts/p1021mds.dts diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts new file mode 100644 index 0000000..7fad2df2 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021mds.dts @@ -0,0 +1,698 @@ +/* + * P1021 MDS Device Tree Source + * + * Copyright 2010 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "fsl,P1021"; + compatible = "fsl,P1021MDS"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1021@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1021@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xffe05000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + /* NAND Flash, BCSR, PMC0/1*/ + ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf8010000 0x00020000 + 0x3 0x0 0x0 0xf8020000 0x00020000>; + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x0 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 5MB for Compressed Root file System Image */ + reg = <0x00600000 0x00500000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@b00000 { + /* 6MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00600000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 14MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00e00000>; + label = "NAND (RW) Writable User area"; + }; + + partition@1f00000 { + /* 1MB for microcode */ + reg = <0x01f00000 0x00100000>; + label = "NAND (RO) QE Ucode"; + read-only; + }; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + }; + + pib@2,0 { + compatible = "fsl,p1021mds-pib"; + reg = <2 0 0x10000>; + }; + + pib@3,0 { + compatible = "fsl,p1021mds-pib"; + reg = <3 0 0x10000>; + }; + }; + + soc@ffe00000 { + + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1021-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1021-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p1021-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + espi,num-ss-bits = <4>; + mode = "cpu"; + + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1021-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <1 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + reg = <0x4>; + }; + }; + + mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x25000 0x1000 0xb1030 0x4>; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@B0000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB0000 0x1000>; + interrupts = <29 2 30 2 34 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB4000 0x1000>; + interrupts = <17 2 18 2 24 2>; + }; + }; + + enet1: ethernet@B1000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + phy-handle = <&phy4>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB1000 0x1000>; + interrupts = <35 2 36 2 40 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB5000 0x1000>; + interrupts = <51 2 52 2 67 2>; + }; + }; + + enet2: ethernet@B2000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB2000 0x1000>; + interrupts = <31 2 32 2 33 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB6000 0x1000>; + interrupts = <25 2 26 2 27 2>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,p1021-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", + "fsl,sec3.0", "fsl,sec2.4", + "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p1021-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p1021-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 +*/ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + }; + }; + + pci0: pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe09000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe@ffe80000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <63 2 60 2>; //high:47 low:44 + interrupt-parent = <&mpic>; + }; + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <5>; + reg = <0x2400 0x200>; + interrupts = <40>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x6000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x6000>; + }; + }; + }; +}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index f0684c8..8fe87fc 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -1,5 +1,5 @@ /* - * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved. + * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved. * * Author: Andy Fleming * @@ -154,6 +154,10 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev) * Setup the architecture * */ +#ifdef CONFIG_SMP +extern void __init mpc85xx_smp_init(void); +#endif + static void __init mpc85xx_mds_setup_arch(void) { struct device_node *np; @@ -194,6 +198,10 @@ static void __init mpc85xx_mds_setup_arch(void) } #endif +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + #ifdef CONFIG_QUICC_ENGINE np = of_find_compatible_node(NULL, NULL, "fsl,qe"); if (!np) { @@ -271,9 +279,49 @@ static void __init mpc85xx_mds_setup_arch(void) BCSR_UCC_RGMII, BCSR_UCC_RTBI); } + } else if (machine_is(p1021_mds)) { +#define BCSR11_ENET_MICRST (0x1 << 5) + /* Reset Micrel PHY */ + clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); + setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); } + iounmap(bcsr_regs); } + + if (machine_is(p1021_mds)) { +#define MPC85xx_PMUXCR_OFFSET 0x60 +#define MPC85xx_PMUXCR_QE0 0x00008000 +#define MPC85xx_PMUXCR_QE3 0x00001000 +#define MPC85xx_PMUXCR_QE9 0x00000040 +#define MPC85xx_PMUXCR_QE12 0x00000008 + static __be32 __iomem *pmuxcr; + + np = of_find_node_by_name(NULL, "global-utilities"); + + if (np) { + pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET; + + if (!pmuxcr) + printk(KERN_EMERG "Error: Alternate function" + " signal multiplex control register not" + " mapped!\n"); + else + /* P1021 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management singals in PMUXCR + * register. + */ + setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 | + MPC85xx_PMUXCR_QE3 | + MPC85xx_PMUXCR_QE9 | + MPC85xx_PMUXCR_QE12); + + of_node_put(np); + } + + } #endif /* CONFIG_QUICC_ENGINE */ #ifdef CONFIG_SWIOTLB @@ -330,6 +378,16 @@ static struct of_device_id mpc85xx_ids[] = { {}, }; +static struct of_device_id p1021_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .type = "qe", }, + { .compatible = "fsl,qe", }, + { .compatible = "gianfar", }, + {}, +}; + static int __init mpc85xx_publish_devices(void) { if (machine_is(mpc8568_mds)) @@ -342,11 +400,22 @@ static int __init mpc85xx_publish_devices(void) return 0; } + +static int __init p1021_publish_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, p1021_ids, NULL); + + return 0; +} + machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices); +machine_device_initcall(p1021_mds, p1021_publish_devices); machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier); machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier); +machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier); static void __init mpc85xx_mds_pic_init(void) { @@ -366,7 +435,7 @@ static void __init mpc85xx_mds_pic_init(void) mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS, + MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); of_node_put(np); @@ -380,7 +449,11 @@ static void __init mpc85xx_mds_pic_init(void) if (!np) return; } - qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); + if (machine_is(p1021_mds)) + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + else + qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); of_node_put(np); #endif /* CONFIG_QUICC_ENGINE */ } @@ -426,3 +499,26 @@ define_machine(mpc8569_mds) { .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif }; + +static int __init p1021_mds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1021MDS"); + +} + +define_machine(p1021_mds) { + .name = "P1021 MDS", + .probe = p1021_mds_probe, + .setup_arch = mpc85xx_mds_setup_arch, + .init_IRQ = mpc85xx_mds_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; + -- 2.7.4