From 45df80d7605c25055a85fbc5a8446c81c6c0ca24 Mon Sep 17 00:00:00 2001 From: Vadym Kochan Date: Mon, 31 Aug 2020 04:55:39 +0300 Subject: [PATCH] misc: eeprom: at24: register nvmem only after eeprom is ready to use During nvmem_register() the nvmem core sends notifications when: - cell added - nvmem added and during these notifications some callback func may access the nvmem device, which will fail in case of at24 eeprom because regulator and pm are enabled after nvmem_register(). Fixes: cd5676db0574 ("misc: eeprom: at24: support pm_runtime control") Fixes: b20eb4c1f026 ("eeprom: at24: drop unnecessary label") Cc: stable@vger.kernel.org Signed-off-by: Vadym Kochan Signed-off-by: Bartosz Golaszewski --- drivers/misc/eeprom/at24.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 2591c21..26a23ab 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -692,10 +692,6 @@ static int at24_probe(struct i2c_client *client) nvmem_config.word_size = 1; nvmem_config.size = byte_len; - at24->nvmem = devm_nvmem_register(dev, &nvmem_config); - if (IS_ERR(at24->nvmem)) - return PTR_ERR(at24->nvmem); - i2c_set_clientdata(client, at24); err = regulator_enable(at24->vcc_reg); @@ -708,6 +704,13 @@ static int at24_probe(struct i2c_client *client) pm_runtime_set_active(dev); pm_runtime_enable(dev); + at24->nvmem = devm_nvmem_register(dev, &nvmem_config); + if (IS_ERR(at24->nvmem)) { + pm_runtime_disable(dev); + regulator_disable(at24->vcc_reg); + return PTR_ERR(at24->nvmem); + } + /* * Perform a one-byte test read to verify that the * chip is functional. -- 2.7.4